diff mbox series

[v5,2/8] ath10k: enable RX bundle receive for sdio

Message ID 1567679893-14029-3-git-send-email-wgong@codeaurora.org (mailing list archive)
State New, archived
Headers show
Series ath10k: improve throughout of tcp/udp TX/RX of sdio | expand

Commit Message

Wen Gong Sept. 5, 2019, 10:38 a.m. UTC
From: Alagu Sankar <alagusankar@silex-india.com>

The existing implementation of initiating multiple sdio transfers for
receive bundling is slowing down the receive speed. Combining the
transfers using a bundle method would be ideal.

The transmission utilization ratio for sdio bus for small packet is
slow, because the space and time cost for sdio bus is same for large
length packet and small length packet. So the speed of data for large
length packet is higher than small length.

Test result of different length of data:
data packet(byte)   cost time(us)   calculated rate(Mbps)
      256               28                73
      512               33               124
     1024               35               234
     1792               45               318
    14336              168               682
    28672              333               688
    57344              660               695

Tested with QCA6174 SDIO with firmware
WLAN.RMH.4.4.1-00007-QCARMSWP-1.

Signed-off-by: Alagu Sankar <alagusankar@silex-india.com>
Signed-off-by: Wen Gong <wgong@codeaurora.org>
---
v2: fix incorrect skb tail of rx bundle in ath10k_sdio_mbox_rx_process_packet
v3: change some code style
split fix incorrect skb tail of rx bundle to patch "adjust skb length in ath10k_sdio_mbox_rx_packet"
v4: add err handle in ath10k_sdio_mbox_rx_fetch_bundle
v5: no change

 drivers/net/wireless/ath/ath10k/sdio.c | 108 ++++++++++++++++++++++-----------
 drivers/net/wireless/ath/ath10k/sdio.h |   7 ++-
 2 files changed, 76 insertions(+), 39 deletions(-)

Comments

Kalle Valo Sept. 21, 2019, 12:15 p.m. UTC | #1
Wen Gong <wgong@codeaurora.org> writes:

> From: Alagu Sankar <alagusankar@silex-india.com>
>
> The existing implementation of initiating multiple sdio transfers for
> receive bundling is slowing down the receive speed. Combining the
> transfers using a bundle method would be ideal.
>
> The transmission utilization ratio for sdio bus for small packet is
> slow, because the space and time cost for sdio bus is same for large
> length packet and small length packet. So the speed of data for large
> length packet is higher than small length.
>
> Test result of different length of data:
> data packet(byte)   cost time(us)   calculated rate(Mbps)
>       256               28                73
>       512               33               124
>      1024               35               234
>      1792               45               318
>     14336              168               682
>     28672              333               688
>     57344              660               695
>
> Tested with QCA6174 SDIO with firmware
> WLAN.RMH.4.4.1-00007-QCARMSWP-1.
>
> Signed-off-by: Alagu Sankar <alagusankar@silex-india.com>
> Signed-off-by: Wen Gong <wgong@codeaurora.org>

[...]

> --- a/drivers/net/wireless/ath/ath10k/sdio.c
> +++ b/drivers/net/wireless/ath/ath10k/sdio.c
> @@ -24,6 +24,9 @@
>  #include "trace.h"
>  #include "sdio.h"
>  
> +#define ATH10K_SDIO_DMA_BUF_SIZE	(32 * 1024)
> +#define ATH10K_SDIO_VSG_BUF_SIZE	(32 * 1024)

Why two defines? Seems error prone to me and using the latter should be
enough.

> @@ -529,6 +532,7 @@ static int ath10k_sdio_mbox_rx_alloc(struct ath10k *ar,
>  	size_t full_len, act_len;
>  	bool last_in_bundle;
>  	int ret, i;
> +	int pkt_cnt = 0;
>  
>  	if (n_lookaheads > ATH10K_SDIO_MAX_RX_MSGS) {
>  		ath10k_warn(ar,
> @@ -572,20 +576,22 @@ static int ath10k_sdio_mbox_rx_alloc(struct ath10k *ar,
>  			 */
>  			size_t bndl_cnt;
>  
> -			ret = ath10k_sdio_mbox_alloc_pkt_bundle(ar,
> -								&ar_sdio->rx_pkts[i],
> -								htc_hdr,
> -								full_len,
> -								act_len,
> -								&bndl_cnt);
> +			struct ath10k_sdio_rx_data *rx_pkts =
> +				&ar_sdio->rx_pkts[pkt_cnt];

You need to declare rx_pkts in the beginning of the block, not mixed
within the code.

> @@ -606,9 +612,10 @@ static int ath10k_sdio_mbox_rx_alloc(struct ath10k *ar,
>  			ath10k_warn(ar, "alloc_rx_pkt error %d\n", ret);
>  			goto err;
>  		}
> +		pkt_cnt++;

Empty line before 'pkt_cnt++'.

> -static int ath10k_sdio_mbox_rx_fetch(struct ath10k *ar)
> +static int ath10k_sdio_mbox_rx_fetch_bundle(struct ath10k *ar)
>  {
>  	struct ath10k_sdio *ar_sdio = ath10k_sdio_priv(ar);
> +	struct ath10k_sdio_rx_data *pkt;
> +	struct ath10k_htc_hdr *htc_hdr;
>  	int ret, i;
> +	u32 pkt_offset, virt_pkt_len;
>  
> +	virt_pkt_len = 0;
>  	for (i = 0; i < ar_sdio->n_rx_pkts; i++) {
> -		ret = ath10k_sdio_mbox_rx_packet(ar,
> -						 &ar_sdio->rx_pkts[i]);
> +		virt_pkt_len += ar_sdio->rx_pkts[i].alloc_len;
> +	}
> +
> +	if (virt_pkt_len < ATH10K_SDIO_DMA_BUF_SIZE) {
> +		ret = ath10k_sdio_readsb(ar, ar_sdio->mbox_info.htc_addr,
> +					 ar_sdio->vsg_buffer, virt_pkt_len);
>  		if (ret)
>  			goto err;
> +	} else {
> +		ath10k_err(ar, "size exceeding limit %d\n", virt_pkt_len);
> +		ret = -ENOMEM;
> +		goto err;
> +	}

Use common error handling style, ath10k_warn() and -E2BIG:

if (virt_pkt_len >= ATH10K_SDIO_DMA_BUF_SIZE) {
	ath10k_err(ar, "size exceeding limit %d\n", virt_pkt_len);
	ret = -E2BIG;
	goto err;
}

ret = ath10k_sdio_readsb(ar, ar_sdio->mbox_info.htc_addr,
			 ar_sdio->vsg_buffer, virt_pkt_len);
if (ret) {
        ath10k_warn("failed to do foo: %d", ret)
	goto err;
}

> @@ -1123,7 +1151,7 @@ static int ath10k_sdio_bmi_get_rx_lookahead(struct ath10k *ar)
>  					 MBOX_HOST_INT_STATUS_ADDRESS,
>  					 &rx_word);
>  		if (ret) {
> -			ath10k_warn(ar, "unable to read RX_LOOKAHEAD_VALID: %d\n", ret);
> +			ath10k_warn(ar, "unable to read rx_lookahd: %d\n", ret);

Looks like an unnecessary change?

> @@ -196,6 +196,9 @@ struct ath10k_sdio {
>  	struct ath10k *ar;
>  	struct ath10k_sdio_irq_data irq_data;
>  
> +	/* temporary buffer for sdio read */
> +	u8 *vsg_buffer;

So how is vsg_buffer protected? You should document that here.
diff mbox series

Patch

diff --git a/drivers/net/wireless/ath/ath10k/sdio.c b/drivers/net/wireless/ath/ath10k/sdio.c
index 1127e44..d7ffcd5 100644
--- a/drivers/net/wireless/ath/ath10k/sdio.c
+++ b/drivers/net/wireless/ath/ath10k/sdio.c
@@ -24,6 +24,9 @@ 
 #include "trace.h"
 #include "sdio.h"
 
+#define ATH10K_SDIO_DMA_BUF_SIZE	(32 * 1024)
+#define ATH10K_SDIO_VSG_BUF_SIZE	(32 * 1024)
+
 /* inlined helper functions */
 
 static inline int ath10k_sdio_calc_txrx_padded_len(struct ath10k_sdio *ar_sdio,
@@ -484,11 +487,11 @@  static int ath10k_sdio_mbox_rx_process_packets(struct ath10k *ar,
 	return ret;
 }
 
-static int ath10k_sdio_mbox_alloc_pkt_bundle(struct ath10k *ar,
-					     struct ath10k_sdio_rx_data *rx_pkts,
-					     struct ath10k_htc_hdr *htc_hdr,
-					     size_t full_len, size_t act_len,
-					     size_t *bndl_cnt)
+static int ath10k_sdio_mbox_alloc_bundle(struct ath10k *ar,
+					 struct ath10k_sdio_rx_data *rx_pkts,
+					 struct ath10k_htc_hdr *htc_hdr,
+					 size_t full_len, size_t act_len,
+					 size_t *bndl_cnt)
 {
 	int ret, i;
 
@@ -529,6 +532,7 @@  static int ath10k_sdio_mbox_rx_alloc(struct ath10k *ar,
 	size_t full_len, act_len;
 	bool last_in_bundle;
 	int ret, i;
+	int pkt_cnt = 0;
 
 	if (n_lookaheads > ATH10K_SDIO_MAX_RX_MSGS) {
 		ath10k_warn(ar,
@@ -572,20 +576,22 @@  static int ath10k_sdio_mbox_rx_alloc(struct ath10k *ar,
 			 */
 			size_t bndl_cnt;
 
-			ret = ath10k_sdio_mbox_alloc_pkt_bundle(ar,
-								&ar_sdio->rx_pkts[i],
-								htc_hdr,
-								full_len,
-								act_len,
-								&bndl_cnt);
+			struct ath10k_sdio_rx_data *rx_pkts =
+				&ar_sdio->rx_pkts[pkt_cnt];
+
+			ret = ath10k_sdio_mbox_alloc_bundle(ar,
+							    rx_pkts,
+							    htc_hdr,
+							    full_len,
+							    act_len,
+							    &bndl_cnt);
 
 			if (ret) {
 				ath10k_warn(ar, "alloc_bundle error %d\n", ret);
 				goto err;
 			}
 
-			n_lookaheads += bndl_cnt;
-			i += bndl_cnt;
+			pkt_cnt += bndl_cnt;
 			/*Next buffer will be the last in the bundle */
 			last_in_bundle = true;
 		}
@@ -597,7 +603,7 @@  static int ath10k_sdio_mbox_rx_alloc(struct ath10k *ar,
 		if (htc_hdr->flags & ATH10K_HTC_FLAGS_RECV_1MORE_BLOCK)
 			full_len += ATH10K_HIF_MBOX_BLOCK_SIZE;
 
-		ret = ath10k_sdio_mbox_alloc_rx_pkt(&ar_sdio->rx_pkts[i],
+		ret = ath10k_sdio_mbox_alloc_rx_pkt(&ar_sdio->rx_pkts[pkt_cnt],
 						    act_len,
 						    full_len,
 						    last_in_bundle,
@@ -606,9 +612,10 @@  static int ath10k_sdio_mbox_rx_alloc(struct ath10k *ar,
 			ath10k_warn(ar, "alloc_rx_pkt error %d\n", ret);
 			goto err;
 		}
+		pkt_cnt++;
 	}
 
-	ar_sdio->n_rx_pkts = i;
+	ar_sdio->n_rx_pkts = pkt_cnt;
 
 	return 0;
 
@@ -622,10 +629,10 @@  static int ath10k_sdio_mbox_rx_alloc(struct ath10k *ar,
 	return ret;
 }
 
-static int ath10k_sdio_mbox_rx_packet(struct ath10k *ar,
-				      struct ath10k_sdio_rx_data *pkt)
+static int ath10k_sdio_mbox_rx_fetch(struct ath10k *ar)
 {
 	struct ath10k_sdio *ar_sdio = ath10k_sdio_priv(ar);
+	struct ath10k_sdio_rx_data *pkt = &ar_sdio->rx_pkts[0];
 	struct sk_buff *skb = pkt->skb;
 	struct ath10k_htc_hdr *htc_hdr;
 	int ret;
@@ -633,46 +640,64 @@  static int ath10k_sdio_mbox_rx_packet(struct ath10k *ar,
 	ret = ath10k_sdio_readsb(ar, ar_sdio->mbox_info.htc_addr,
 				 skb->data, pkt->alloc_len);
 
-	if (!ret) {
-		/* Update actual length. The original length may be incorrect,
-		 * as the FW will bundle multiple packets as long as their sizes
-		 * fit within the same aligned length (pkt->alloc_len).
-		 */
-		htc_hdr = (struct ath10k_htc_hdr *)skb->data;
-		pkt->act_len = le16_to_cpu(htc_hdr->len) + sizeof(*htc_hdr);
-		if (pkt->act_len <= pkt->alloc_len) {
-			skb_put(skb, pkt->act_len);
-		} else {
-			ath10k_warn(ar, "rx packet too large (%zu > %zu)\n",
-				    pkt->act_len, pkt->alloc_len);
-			ret = -EMSGSIZE;
-		}
+	if (ret) {
+		ar_sdio->n_rx_pkts = 0;
+		ath10k_sdio_mbox_free_rx_pkt(pkt);
+		return ret;
 	}
 
+	htc_hdr = (struct ath10k_htc_hdr *)skb->data;
+	pkt->act_len = le16_to_cpu(htc_hdr->len) + sizeof(*htc_hdr);
 	pkt->status = ret;
+	skb_put(skb, pkt->act_len);
 
 	return ret;
 }
 
-static int ath10k_sdio_mbox_rx_fetch(struct ath10k *ar)
+static int ath10k_sdio_mbox_rx_fetch_bundle(struct ath10k *ar)
 {
 	struct ath10k_sdio *ar_sdio = ath10k_sdio_priv(ar);
+	struct ath10k_sdio_rx_data *pkt;
+	struct ath10k_htc_hdr *htc_hdr;
 	int ret, i;
+	u32 pkt_offset, virt_pkt_len;
 
+	virt_pkt_len = 0;
 	for (i = 0; i < ar_sdio->n_rx_pkts; i++) {
-		ret = ath10k_sdio_mbox_rx_packet(ar,
-						 &ar_sdio->rx_pkts[i]);
+		virt_pkt_len += ar_sdio->rx_pkts[i].alloc_len;
+	}
+
+	if (virt_pkt_len < ATH10K_SDIO_DMA_BUF_SIZE) {
+		ret = ath10k_sdio_readsb(ar, ar_sdio->mbox_info.htc_addr,
+					 ar_sdio->vsg_buffer, virt_pkt_len);
 		if (ret)
 			goto err;
+	} else {
+		ath10k_err(ar, "size exceeding limit %d\n", virt_pkt_len);
+		ret = -ENOMEM;
+		goto err;
+	}
+
+	pkt_offset = 0;
+	for (i = 0; i < ar_sdio->n_rx_pkts; i++) {
+		pkt = &ar_sdio->rx_pkts[i];
+		htc_hdr = (struct ath10k_htc_hdr *)(ar_sdio->vsg_buffer + pkt_offset);
+		pkt->act_len = le16_to_cpu(htc_hdr->len) + sizeof(*htc_hdr);
+
+		skb_put_data(pkt->skb, htc_hdr, pkt->act_len);
+		pkt->status = 0;
+		pkt_offset += pkt->alloc_len;
 	}
 
 	return 0;
 
 err:
 	/* Free all packets that was not successfully fetched. */
-	for (; i < ar_sdio->n_rx_pkts; i++)
+	for (i = 0; i < ar_sdio->n_rx_pkts; i++)
 		ath10k_sdio_mbox_free_rx_pkt(&ar_sdio->rx_pkts[i]);
 
+	ar_sdio->n_rx_pkts = 0;
+
 	return ret;
 }
 
@@ -715,7 +740,10 @@  static int ath10k_sdio_mbox_rxmsg_pending_handler(struct ath10k *ar,
 			 */
 			*done = false;
 
-		ret = ath10k_sdio_mbox_rx_fetch(ar);
+		if (ar_sdio->n_rx_pkts > 1)
+			ret = ath10k_sdio_mbox_rx_fetch_bundle(ar);
+		else
+			ret = ath10k_sdio_mbox_rx_fetch(ar);
 
 		/* Process fetched packets. This will potentially update
 		 * n_lookaheads depending on if the packets contain lookahead
@@ -1123,7 +1151,7 @@  static int ath10k_sdio_bmi_get_rx_lookahead(struct ath10k *ar)
 					 MBOX_HOST_INT_STATUS_ADDRESS,
 					 &rx_word);
 		if (ret) {
-			ath10k_warn(ar, "unable to read RX_LOOKAHEAD_VALID: %d\n", ret);
+			ath10k_warn(ar, "unable to read rx_lookahd: %d\n", ret);
 			return ret;
 		}
 
@@ -2018,6 +2046,12 @@  static int ath10k_sdio_probe(struct sdio_func *func,
 		goto err_core_destroy;
 	}
 
+	ar_sdio->vsg_buffer = devm_kmalloc(ar->dev, ATH10K_SDIO_VSG_BUF_SIZE, GFP_KERNEL);
+	if (!ar_sdio->vsg_buffer) {
+		ret = -ENOMEM;
+		goto err_core_destroy;
+	}
+
 	ar_sdio->irq_data.irq_en_reg =
 		devm_kzalloc(ar->dev, sizeof(struct ath10k_sdio_irq_enable_regs),
 			     GFP_KERNEL);
diff --git a/drivers/net/wireless/ath/ath10k/sdio.h b/drivers/net/wireless/ath/ath10k/sdio.h
index b8c7ac0..4896eca 100644
--- a/drivers/net/wireless/ath/ath10k/sdio.h
+++ b/drivers/net/wireless/ath/ath10k/sdio.h
@@ -138,8 +138,8 @@  struct ath10k_sdio_irq_proc_regs {
 	u8 rx_lookahead_valid;
 	u8 host_int_status2;
 	u8 gmbox_rx_avail;
-	__le32 rx_lookahead[2];
-	__le32 rx_gmbox_lookahead_alias[2];
+	__le32 rx_lookahead[2 * ATH10K_HIF_MBOX_NUM_MAX];
+	__le32 int_status_enable;
 };
 
 struct ath10k_sdio_irq_enable_regs {
@@ -196,6 +196,9 @@  struct ath10k_sdio {
 	struct ath10k *ar;
 	struct ath10k_sdio_irq_data irq_data;
 
+	/* temporary buffer for sdio read */
+	u8 *vsg_buffer;
+
 	/* temporary buffer for BMI requests */
 	u8 *bmi_buf;