| Message ID | 1568639388-27291-4-git-send-email-yiboz@codeaurora.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [1/4] mac80211: Switch to a virtual time-based airtime scheduler | expand |
Yibo Zhao <yiboz@codeaurora.org> writes: > Global airtime weight sum is updated only when txq is added/removed > from rbtree. If upper layer configures sta weight during high load, > airtime weight sum will not be updated since txq is most likely on the > tree. It could a little late for upper layer to reconfigure sta weight > when txq is already in the rbtree. And thus, incorrect airtime weight sum > will lead to incorrect global virtual time calculation as well as global > airtime weight sum overflow of airtime weight sum during txq removed. > > Hence, need to update airtime weight sum upon receiving event for > configuring sta weight once sta's txq is on the rbtree. > > Besides, if airtime weight sum of ACs and sta weight is synced under the > same per AC lock protection, there can be a very short window causing > incorrct airtime weight sum calculation as below: > > active_txq_lock_VO . > VO weight sum is syncd . > sta airtime weight sum is synced . > active_txq_unlock_VO . > . . > active_txq_lock_VI . > VI weight sum is syncd . > sta airtime weight sum active_txq_lock_BE > active_txq_unlock_VI Remove txq and thus sum > . is calculated with synced > . sta airtime weight > . active_txq_unlock_BE > > So introduce a per ac synced station airtime weight synced with per > AC synced weight sum together. And the per-AC station airtime weight > is used to calculate weight sum. > > Signed-off-by: Yibo Zhao <yiboz@codeaurora.org> > --- > net/mac80211/cfg.c | 27 +++++++++++++++++++++++++-- > net/mac80211/sta_info.c | 6 ++++-- > net/mac80211/sta_info.h | 3 +++ > net/mac80211/tx.c | 4 ++-- > 4 files changed, 34 insertions(+), 6 deletions(-) > > diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c > index d65aa01..4b420bb 100644 > --- a/net/mac80211/cfg.c > +++ b/net/mac80211/cfg.c > @@ -1284,7 +1284,8 @@ static int sta_apply_parameters(struct ieee80211_local *local, > int ret = 0; > struct ieee80211_supported_band *sband; > struct ieee80211_sub_if_data *sdata = sta->sdata; > - u32 mask, set; > + u32 mask, set, tid, ac; > + struct txq_info *txqi; > > sband = ieee80211_get_sband(sdata); > if (!sband) > @@ -1452,8 +1453,30 @@ static int sta_apply_parameters(struct ieee80211_local *local, > if (ieee80211_vif_is_mesh(&sdata->vif)) > sta_apply_mesh_params(local, sta, params); > > - if (params->airtime_weight) > + if (params->airtime_weight && > + params->airtime_weight != sta->airtime_weight) { > + for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) { > + spin_lock_bh(&local->active_txq_lock[ac]); > + for (tid = 0; tid < IEEE80211_NUM_TIDS + 1; tid++) { > + if (!sta->sta.txq[tid] || > + ac != ieee80211_ac_from_tid(tid)) > + continue; > + > + sta->airtime_weight_synced[ac] = > + params->airtime_weight; > + > + txqi = to_txq_info(sta->sta.txq[tid]); > + if (RB_EMPTY_NODE(&txqi->schedule_order)) > + continue; > + > + local->airtime_weight_sum[ac] = local->airtime_weight_sum[ac] + > + params->airtime_weight - > + sta->airtime_weight; > + } > + spin_unlock_bh(&local->active_txq_lock[ac]); > + } > sta->airtime_weight = params->airtime_weight; With this, airtime_weight is basically only used to return to and from userspace, right? I.e., after the above loop has run, it will match the contents of airtime_weight_synced; so why not just turn airtime_weight into a per-ac array? You could just use airtime_weight[0] as the value to return to userspace... -Toke
On 2019-09-18 05:24, Toke Høiland-Jørgensen wrote: > Yibo Zhao <yiboz@codeaurora.org> writes: > >> Global airtime weight sum is updated only when txq is added/removed >> from rbtree. If upper layer configures sta weight during high load, >> airtime weight sum will not be updated since txq is most likely on the >> tree. It could a little late for upper layer to reconfigure sta weight >> when txq is already in the rbtree. And thus, incorrect airtime weight >> sum >> will lead to incorrect global virtual time calculation as well as >> global >> airtime weight sum overflow of airtime weight sum during txq removed. >> >> Hence, need to update airtime weight sum upon receiving event for >> configuring sta weight once sta's txq is on the rbtree. >> >> Besides, if airtime weight sum of ACs and sta weight is synced under >> the >> same per AC lock protection, there can be a very short window causing >> incorrct airtime weight sum calculation as below: >> >> active_txq_lock_VO . >> VO weight sum is syncd . >> sta airtime weight sum is synced . >> active_txq_unlock_VO . >> . . >> active_txq_lock_VI . >> VI weight sum is syncd . >> sta airtime weight sum active_txq_lock_BE >> active_txq_unlock_VI Remove txq and thus sum >> . is calculated with synced >> . sta airtime weight >> . active_txq_unlock_BE >> >> So introduce a per ac synced station airtime weight synced with per >> AC synced weight sum together. And the per-AC station airtime weight >> is used to calculate weight sum. >> >> Signed-off-by: Yibo Zhao <yiboz@codeaurora.org> >> --- >> net/mac80211/cfg.c | 27 +++++++++++++++++++++++++-- >> net/mac80211/sta_info.c | 6 ++++-- >> net/mac80211/sta_info.h | 3 +++ >> net/mac80211/tx.c | 4 ++-- >> 4 files changed, 34 insertions(+), 6 deletions(-) >> >> diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c >> index d65aa01..4b420bb 100644 >> --- a/net/mac80211/cfg.c >> +++ b/net/mac80211/cfg.c >> @@ -1284,7 +1284,8 @@ static int sta_apply_parameters(struct >> ieee80211_local *local, >> int ret = 0; >> struct ieee80211_supported_band *sband; >> struct ieee80211_sub_if_data *sdata = sta->sdata; >> - u32 mask, set; >> + u32 mask, set, tid, ac; >> + struct txq_info *txqi; >> >> sband = ieee80211_get_sband(sdata); >> if (!sband) >> @@ -1452,8 +1453,30 @@ static int sta_apply_parameters(struct >> ieee80211_local *local, >> if (ieee80211_vif_is_mesh(&sdata->vif)) >> sta_apply_mesh_params(local, sta, params); >> >> - if (params->airtime_weight) >> + if (params->airtime_weight && >> + params->airtime_weight != sta->airtime_weight) { >> + for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) { >> + spin_lock_bh(&local->active_txq_lock[ac]); >> + for (tid = 0; tid < IEEE80211_NUM_TIDS + 1; tid++) { >> + if (!sta->sta.txq[tid] || >> + ac != ieee80211_ac_from_tid(tid)) >> + continue; >> + >> + sta->airtime_weight_synced[ac] = >> + params->airtime_weight; >> + >> + txqi = to_txq_info(sta->sta.txq[tid]); >> + if (RB_EMPTY_NODE(&txqi->schedule_order)) >> + continue; >> + >> + local->airtime_weight_sum[ac] = local->airtime_weight_sum[ac] + >> + params->airtime_weight - >> + sta->airtime_weight; >> + } >> + spin_unlock_bh(&local->active_txq_lock[ac]); >> + } >> sta->airtime_weight = params->airtime_weight; > > With this, airtime_weight is basically only used to return to and from > userspace, right? I.e., after the above loop has run, it will match the > contents of airtime_weight_synced; so why not just turn airtime_weight > into a per-ac array? You could just use airtime_weight[0] as the value > to return to userspace... Yes, I also feel it is a little weird to keep both of them. I am fine with suggestion. > > -Toke
diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index d65aa01..4b420bb 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -1284,7 +1284,8 @@ static int sta_apply_parameters(struct ieee80211_local *local, int ret = 0; struct ieee80211_supported_band *sband; struct ieee80211_sub_if_data *sdata = sta->sdata; - u32 mask, set; + u32 mask, set, tid, ac; + struct txq_info *txqi; sband = ieee80211_get_sband(sdata); if (!sband) @@ -1452,8 +1453,30 @@ static int sta_apply_parameters(struct ieee80211_local *local, if (ieee80211_vif_is_mesh(&sdata->vif)) sta_apply_mesh_params(local, sta, params); - if (params->airtime_weight) + if (params->airtime_weight && + params->airtime_weight != sta->airtime_weight) { + for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) { + spin_lock_bh(&local->active_txq_lock[ac]); + for (tid = 0; tid < IEEE80211_NUM_TIDS + 1; tid++) { + if (!sta->sta.txq[tid] || + ac != ieee80211_ac_from_tid(tid)) + continue; + + sta->airtime_weight_synced[ac] = + params->airtime_weight; + + txqi = to_txq_info(sta->sta.txq[tid]); + if (RB_EMPTY_NODE(&txqi->schedule_order)) + continue; + + local->airtime_weight_sum[ac] = local->airtime_weight_sum[ac] + + params->airtime_weight - + sta->airtime_weight; + } + spin_unlock_bh(&local->active_txq_lock[ac]); + } sta->airtime_weight = params->airtime_weight; + } /* set the STA state after all sta info from usermode has been set */ if (test_sta_flag(sta, WLAN_STA_TDLS_PEER) || diff --git a/net/mac80211/sta_info.c b/net/mac80211/sta_info.c index feac975..b00812f 100644 --- a/net/mac80211/sta_info.c +++ b/net/mac80211/sta_info.c @@ -389,6 +389,7 @@ struct sta_info *sta_info_alloc(struct ieee80211_sub_if_data *sdata, for (i = 0; i < IEEE80211_NUM_ACS; i++) { skb_queue_head_init(&sta->ps_tx_buf[i]); skb_queue_head_init(&sta->tx_filtered[i]); + sta->airtime_weight_synced[i] = sta->airtime_weight; } for (i = 0; i < IEEE80211_NUM_TIDS; i++) @@ -1850,11 +1851,12 @@ void ieee80211_sta_register_airtime(struct ieee80211_sta *pubsta, u8 tid, sta->airtime[ac].tx_airtime += tx_airtime; sta->airtime[ac].rx_airtime += rx_airtime; - weight_sum = local->airtime_weight_sum[ac] ?: sta->airtime_weight; + weight_sum = local->airtime_weight_sum[ac] ? + : sta->airtime_weight_synced[ac]; /* Round the calculation of global vt */ local->airtime_v_t[ac] += (airtime + (weight_sum >> 1)) / weight_sum; - sta->airtime[ac].v_t += airtime / sta->airtime_weight; + sta->airtime[ac].v_t += airtime / sta->airtime_weight_synced[ac]; ieee80211_resort_txq(&local->hw, txq); spin_unlock_bh(&local->active_txq_lock[ac]); diff --git a/net/mac80211/sta_info.h b/net/mac80211/sta_info.h index 5055f94..1298902 100644 --- a/net/mac80211/sta_info.h +++ b/net/mac80211/sta_info.h @@ -476,6 +476,8 @@ struct ieee80211_sta_rx_stats { * @tid_seq: per-TID sequence numbers for sending to this STA * @airtime: per-AC struct airtime_info describing airtime statistics for this * station + * @airtime_weight_synced: station per-AC airtime weight for sync and + * calculation * @airtime_weight: station weight for airtime fairness calculation purposes * @ampdu_mlme: A-MPDU state machine state * @mesh: mesh STA information @@ -602,6 +604,7 @@ struct sta_info { u16 tid_seq[IEEE80211_QOS_CTL_TID_MASK + 1]; struct airtime_info airtime[IEEE80211_NUM_ACS]; + u16 airtime_weight_synced[IEEE80211_NUM_ACS]; u16 airtime_weight; /* diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c index 60cf569..3592d49 100644 --- a/net/mac80211/tx.c +++ b/net/mac80211/tx.c @@ -3735,7 +3735,7 @@ void ieee80211_schedule_txq(struct ieee80211_hw *hw, struct sta_info *sta = container_of(txq->sta, struct sta_info, sta); - local->airtime_weight_sum[ac] += sta->airtime_weight; + local->airtime_weight_sum[ac] += sta->airtime_weight_synced[ac]; if (local->airtime_v_t[ac] > AIRTIME_GRACE) sta->airtime[ac].v_t = max(local->airtime_v_t[ac] - AIRTIME_GRACE, sta->airtime[ac].v_t); @@ -3779,7 +3779,7 @@ static void __ieee80211_unschedule_txq(struct ieee80211_hw *hw, struct sta_info *sta = container_of(txq->sta, struct sta_info, sta); - local->airtime_weight_sum[ac] -= sta->airtime_weight; + local->airtime_weight_sum[ac] -= sta->airtime_weight_synced[ac]; } rb_erase_cached(&txqi->schedule_order,
Global airtime weight sum is updated only when txq is added/removed from rbtree. If upper layer configures sta weight during high load, airtime weight sum will not be updated since txq is most likely on the tree. It could a little late for upper layer to reconfigure sta weight when txq is already in the rbtree. And thus, incorrect airtime weight sum will lead to incorrect global virtual time calculation as well as global airtime weight sum overflow of airtime weight sum during txq removed. Hence, need to update airtime weight sum upon receiving event for configuring sta weight once sta's txq is on the rbtree. Besides, if airtime weight sum of ACs and sta weight is synced under the same per AC lock protection, there can be a very short window causing incorrct airtime weight sum calculation as below: active_txq_lock_VO . VO weight sum is syncd . sta airtime weight sum is synced . active_txq_unlock_VO . . . active_txq_lock_VI . VI weight sum is syncd . sta airtime weight sum active_txq_lock_BE active_txq_unlock_VI Remove txq and thus sum . is calculated with synced . sta airtime weight . active_txq_unlock_BE So introduce a per ac synced station airtime weight synced with per AC synced weight sum together. And the per-AC station airtime weight is used to calculate weight sum. Signed-off-by: Yibo Zhao <yiboz@codeaurora.org> --- net/mac80211/cfg.c | 27 +++++++++++++++++++++++++-- net/mac80211/sta_info.c | 6 ++++-- net/mac80211/sta_info.h | 3 +++ net/mac80211/tx.c | 4 ++-- 4 files changed, 34 insertions(+), 6 deletions(-)