diff mbox series

[2/2] ath10k: allow dynamic SAR power limits to be configured

Message ID 1576684108-30177-3-git-send-email-kvalo@codeaurora.org (mailing list archive)
State New, archived
Headers show
Series ath10k: SAR power limit vendor command | expand

Commit Message

Kalle Valo Dec. 18, 2019, 3:48 p.m. UTC
From: Wen Gong <wgong@codeaurora.org>

Add support for a vendor command for STATION, the command
QCA_NL80211_VENDOR_SUBCMD_SET_SAR_LIMITS which is already defined in
git://w1.fi/hostap.git (src/command/qca-vendor.h). This allows user
space to configure power limits for 2.4 GHz and 5 GHz bands.

ath10k set pdev parameter WMI_PDEV_PARAM_TXPOWER_LIMIT2G and
WMI_PDEV_PARAM_TXPOWER_LIMIT5G to firmware, the 2 value will
be used as one input source to affect the tx power.

When QCA_NL80211_VENDOR_SUBCMD_SET_SAR_LIMITS set to ath10k, it will
be saved the 2.4G and 5G limit value, If STATION is connected meanwhile,
then the 2.4G and 5G WMI command will be set to firmware, otherwise
it will not set to firmware at this moment. When STATION connect
next time, it will set to firmware.

Tested with QCA6174 SDIO with firmware WLAN.RMH.4.4.1-00029.

Signed-off-by: Wen Gong <wgong@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
 drivers/net/wireless/ath/ath10k/Makefile |   1 +
 drivers/net/wireless/ath/ath10k/core.c   |   2 +
 drivers/net/wireless/ath/ath10k/core.h   |   2 +
 drivers/net/wireless/ath/ath10k/hw.h     |   3 +
 drivers/net/wireless/ath/ath10k/mac.c    |  64 +++++++++++++++++
 drivers/net/wireless/ath/ath10k/mac.h    |   2 +-
 drivers/net/wireless/ath/ath10k/vendor.c | 114 +++++++++++++++++++++++++++++++
 drivers/net/wireless/ath/ath10k/vendor.h |  13 ++++
 drivers/net/wireless/ath/ath10k/wmi.h    |   6 ++
 9 files changed, 206 insertions(+), 1 deletion(-)
 create mode 100644 drivers/net/wireless/ath/ath10k/vendor.c
 create mode 100644 drivers/net/wireless/ath/ath10k/vendor.h

Comments

Ping-Ke Shih Dec. 19, 2019, 9:45 a.m. UTC | #1
On Wed, 2019-12-18 at 17:48 +0200, Kalle Valo wrote:
> From: Wen Gong <wgong@codeaurora.org>
> 
> Add support for a vendor command for STATION, the command
> QCA_NL80211_VENDOR_SUBCMD_SET_SAR_LIMITS which is already defined in
> git://w1.fi/hostap.git (src/command/qca-vendor.h). This allows user
> space to configure power limits for 2.4 GHz and 5 GHz bands.
> 
> ath10k set pdev parameter WMI_PDEV_PARAM_TXPOWER_LIMIT2G and
> WMI_PDEV_PARAM_TXPOWER_LIMIT5G to firmware, the 2 value will
> be used as one input source to affect the tx power.
> 
> When QCA_NL80211_VENDOR_SUBCMD_SET_SAR_LIMITS set to ath10k, it will
> be saved the 2.4G and 5G limit value, If STATION is connected meanwhile,
> then the 2.4G and 5G WMI command will be set to firmware, otherwise
> it will not set to firmware at this moment. When STATION connect
> next time, it will set to firmware.
> 
> Tested with QCA6174 SDIO with firmware WLAN.RMH.4.4.1-00029.
> 
> Signed-off-by: Wen Gong <wgong@codeaurora.org>
> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
> ---
>  drivers/net/wireless/ath/ath10k/Makefile |   1 +
>  drivers/net/wireless/ath/ath10k/core.c   |   2 +
>  drivers/net/wireless/ath/ath10k/core.h   |   2 +
>  drivers/net/wireless/ath/ath10k/hw.h     |   3 +
>  drivers/net/wireless/ath/ath10k/mac.c    |  64 +++++++++++++++++
>  drivers/net/wireless/ath/ath10k/mac.h    |   2 +-
>  drivers/net/wireless/ath/ath10k/vendor.c | 114
> +++++++++++++++++++++++++++++++
>  drivers/net/wireless/ath/ath10k/vendor.h |  13 ++++
>  drivers/net/wireless/ath/ath10k/wmi.h    |   6 ++
>  9 files changed, 206 insertions(+), 1 deletion(-)
>  create mode 100644 drivers/net/wireless/ath/ath10k/vendor.c
>  create mode 100644 drivers/net/wireless/ath/ath10k/vendor.h
> 

[...]

> diff --git a/drivers/net/wireless/ath/ath10k/wmi.h
> b/drivers/net/wireless/ath/ath10k/wmi.h
> index 972d53d77654..f0cadaa12399 100644
> --- a/drivers/net/wireless/ath/ath10k/wmi.h
> +++ b/drivers/net/wireless/ath/ath10k/wmi.h
> @@ -3695,6 +3695,12 @@ struct wmi_csa_event {
>  #define VDEV_DEFAULT_STATS_UPDATE_PERIOD    500
>  #define PEER_DEFAULT_STATS_UPDATE_PERIOD    500
>  
> +/* the mask of 4 sub band of 5G for SAR parameters */
> +#define ATH10K_WMI_SAR_5G_0_MASK GENMASK(7, 0)
> +#define ATH10K_WMI_SAR_5G_1_MASK GENMASK(15, 8)
> +#define ATH10K_WMI_SAR_5G_2_MASK GENMASK(23, 16)
> +#define ATH10K_WMI_SAR_5G_3_MASK GENMASK(31, 24)
> +

These masks aren't used.
Do you use 'u32' as four 'u8' SAR power limit for four bands?

>  struct wmi_pdev_param_map {
>  	u32 tx_chain_mask;
>  	u32 rx_chain_mask;
Kalle Valo April 16, 2020, 7:38 a.m. UTC | #2
Kalle Valo <kvalo@codeaurora.org> wrote:

> From: Wen Gong <wgong@codeaurora.org>
> 
> Add support for a vendor command for STATION, the command
> QCA_NL80211_VENDOR_SUBCMD_SET_SAR_LIMITS which is already defined in
> git://w1.fi/hostap.git (src/command/qca-vendor.h). This allows user
> space to configure power limits for 2.4 GHz and 5 GHz bands.
> 
> ath10k set pdev parameter WMI_PDEV_PARAM_TXPOWER_LIMIT2G and
> WMI_PDEV_PARAM_TXPOWER_LIMIT5G to firmware, the 2 value will
> be used as one input source to affect the tx power.
> 
> When QCA_NL80211_VENDOR_SUBCMD_SET_SAR_LIMITS set to ath10k, it will
> be saved the 2.4G and 5G limit value, If STATION is connected meanwhile,
> then the 2.4G and 5G WMI command will be set to firmware, otherwise
> it will not set to firmware at this moment. When STATION connect
> next time, it will set to firmware.
> 
> Tested with QCA6174 SDIO with firmware WLAN.RMH.4.4.1-00029.
> 
> Signed-off-by: Wen Gong <wgong@codeaurora.org>
> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

I'll drop this from my queue now and will resend once there's a
concensus on what interface to use.

Patch set to Changes Requested.
diff mbox series

Patch

diff --git a/drivers/net/wireless/ath/ath10k/Makefile b/drivers/net/wireless/ath/ath10k/Makefile
index 142c777b287f..6cdc7eba5d25 100644
--- a/drivers/net/wireless/ath/ath10k/Makefile
+++ b/drivers/net/wireless/ath/ath10k/Makefile
@@ -13,6 +13,7 @@  ath10k_core-y += mac.o \
 		 bmi.o \
 		 hw.o \
 		 p2p.o \
+		 vendor.o \
 		 swap.o
 
 ath10k_core-$(CONFIG_ATH10K_SPECTRAL) += spectral.o
diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c
index 5ec16ce19b69..e882d2f2e399 100644
--- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c
@@ -25,6 +25,7 @@ 
 #include "testmode.h"
 #include "wmi-ops.h"
 #include "coredump.h"
+#include "vendor.h"
 
 unsigned int ath10k_debug_mask;
 EXPORT_SYMBOL(ath10k_debug_mask);
@@ -190,6 +191,7 @@  static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.uart_pin_workaround = true,
 		.tx_stats_over_pktlog = false,
 		.bmi_large_size_download = true,
+		.dynamic_sar_support = true,
 	},
 	{
 		.id = QCA6174_HW_2_1_VERSION,
diff --git a/drivers/net/wireless/ath/ath10k/core.h b/drivers/net/wireless/ath/ath10k/core.h
index 5101bf2b5b15..b661e0eee0f8 100644
--- a/drivers/net/wireless/ath/ath10k/core.h
+++ b/drivers/net/wireless/ath/ath10k/core.h
@@ -983,6 +983,8 @@  struct ath10k {
 	u8 ps_state_enable;
 
 	bool nlo_enabled;
+	u32 tx_power_2g_limit;
+	u32 tx_power_5g_limit;
 	bool p2p;
 
 	struct {
diff --git a/drivers/net/wireless/ath/ath10k/hw.h b/drivers/net/wireless/ath/ath10k/hw.h
index 21b7a2a873b0..8cee355098e3 100644
--- a/drivers/net/wireless/ath/ath10k/hw.h
+++ b/drivers/net/wireless/ath/ath10k/hw.h
@@ -623,6 +623,9 @@  struct ath10k_hw_params {
 
 	/* tx stats support over pktlog */
 	bool tx_stats_over_pktlog;
+
+	/* support dynamic sar */
+	bool dynamic_sar_support;
 };
 
 struct htt_rx_desc;
diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index 7fee35ff966b..75c600e8fff2 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -24,6 +24,7 @@ 
 #include "wmi-tlv.h"
 #include "wmi-ops.h"
 #include "wow.h"
+#include "vendor.h"
 
 /*********/
 /* Rates */
@@ -2843,6 +2844,65 @@  static int ath10k_mac_vif_recalc_txbf(struct ath10k *ar,
 	return 0;
 }
 
+static bool ath10k_mac_get_connected(struct ath10k *ar)
+{
+	struct ath10k_vif *arvif;
+
+	list_for_each_entry(arvif, &ar->arvifs, list) {
+		if (arvif->is_up && arvif->vdev_type == WMI_VDEV_TYPE_STA)
+			return true;
+	}
+
+	return false;
+}
+
+int ath10k_mac_set_sar_power_limit(struct ath10k *ar)
+{
+	u32 ret, param, pwr_limit_2G, pwr_limit_5G;
+	bool connected, tx_power_valid;
+
+	if (!ar->hw_params.dynamic_sar_support)
+		return 0;
+
+	connected = ath10k_mac_get_connected(ar);
+	tx_power_valid = (ar->tx_power_2g_limit != 0 && ar->tx_power_5g_limit != 0);
+
+	ath10k_dbg(ar, ATH10K_DBG_MAC, "mac connected %d sar power valid %d\n",
+		   connected, tx_power_valid);
+
+	if (!connected || !tx_power_valid)
+		return 0;
+
+	pwr_limit_2G = ar->tx_power_2g_limit;
+	pwr_limit_5G = ar->tx_power_5g_limit;
+
+	ath10k_dbg(ar, ATH10K_DBG_MAC, "mac sar limits max %d 2.4G %d 5G %d\n",
+		   ar->hw_max_tx_power,
+		   pwr_limit_2G,
+		   pwr_limit_5G);
+
+	param = ar->wmi.pdev_param->txpower_limit2g;
+	ret = ath10k_wmi_pdev_set_param(ar, param, pwr_limit_2G);
+	if (ret) {
+		ath10k_warn(ar, "failed to set 2.4G txpower %d: %d\n",
+			    pwr_limit_2G, ret);
+		return ret;
+	}
+	ath10k_dbg(ar, ATH10K_DBG_MAC, "mac set 2.4G txpower %d success\n", pwr_limit_2G);
+
+	param = ar->wmi.pdev_param->txpower_limit5g;
+	ret = ath10k_wmi_pdev_set_param(ar, param, pwr_limit_5G);
+	if (ret) {
+		ath10k_warn(ar, "failed to set 5G txpower %d: %d\n",
+			    pwr_limit_5G, ret);
+		return ret;
+	}
+
+	ath10k_dbg(ar, ATH10K_DBG_MAC, "mac set 5G txpower %d success\n", pwr_limit_5G);
+
+	return 0;
+}
+
 /* can be called only in mac80211 callbacks due to `key_count` usage */
 static void ath10k_bss_assoc(struct ieee80211_hw *hw,
 			     struct ieee80211_vif *vif,
@@ -2926,6 +2986,8 @@  static void ath10k_bss_assoc(struct ieee80211_hw *hw,
 
 	arvif->is_up = true;
 
+	ath10k_mac_set_sar_power_limit(ar);
+
 	/* Workaround: Some firmware revisions (tested with qca6174
 	 * WLAN.RM.2.0-00073) have buggy powersave state machine and must be
 	 * poked with peer param command.
@@ -9074,6 +9136,8 @@  int ath10k_mac_register(struct ath10k *ar)
 			NL80211_FEATURE_SCAN_RANDOM_MAC_ADDR;
 	}
 
+	ath10k_vendor_register(ar);
+
 	ar->hw->wiphy->cipher_suites = cipher_suites;
 
 	/* QCA988x and QCA6174 family chips do not support CCMP-256, GCMP-128
diff --git a/drivers/net/wireless/ath/ath10k/mac.h b/drivers/net/wireless/ath/ath10k/mac.h
index 98d83a26ea60..54c8cfcef611 100644
--- a/drivers/net/wireless/ath/ath10k/mac.h
+++ b/drivers/net/wireless/ath/ath10k/mac.h
@@ -58,7 +58,7 @@  u8 ath10k_mac_hw_rate_to_idx(const struct ieee80211_supported_band *sband,
 			     u8 hw_rate, bool cck);
 u8 ath10k_mac_bitrate_to_idx(const struct ieee80211_supported_band *sband,
 			     u32 bitrate);
-
+int ath10k_mac_set_sar_power_limit(struct ath10k *ar);
 void ath10k_mac_tx_lock(struct ath10k *ar, int reason);
 void ath10k_mac_tx_unlock(struct ath10k *ar, int reason);
 void ath10k_mac_vif_tx_lock(struct ath10k_vif *arvif, int reason);
diff --git a/drivers/net/wireless/ath/ath10k/vendor.c b/drivers/net/wireless/ath/ath10k/vendor.c
new file mode 100644
index 000000000000..755dbf7146cb
--- /dev/null
+++ b/drivers/net/wireless/ath/ath10k/vendor.c
@@ -0,0 +1,114 @@ 
+// SPDX-License-Identifier: ISC
+/*
+ * Copyright (c) 2019, The Linux Foundation. All rights reserved.
+ */
+
+#include <net/netlink.h>
+#include <uapi/nl80211-vnd-qca.h>
+
+#include "mac.h"
+#include "debug.h"
+#include "vendor.h"
+
+static const struct nla_policy
+sar_limits_policy[QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_MAX + 1] = {
+	[QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_BAND] = {.type = NLA_U32},
+	[QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_POWER_LIMIT] = {.type = NLA_U32},
+};
+
+static int ath10k_vendor_set_dynamic_sar_power_limits(struct wiphy *wiphy,
+						      struct wireless_dev *wdev,
+						      const void *data,
+						      int data_len)
+{
+	int rem;
+	struct ieee80211_hw *hw = wiphy_to_ieee80211_hw(wiphy);
+	struct ath10k *ar = hw->priv;
+	struct nlattr *spec[QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_MAX + 1];
+	struct nlattr *tb[QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_MAX + 1];
+	struct nlattr *spec_list;
+	u32 limit;
+	enum nl80211_band band;
+	bool sar_valid = false;
+
+	if (!ar->hw_params.dynamic_sar_support)
+		return -ENOTSUPP;
+
+	if (nla_parse(tb, QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_MAX, data, data_len,
+		      sar_limits_policy, NULL)) {
+		ath10k_warn(ar, "invalid SAR attr\n");
+		return -EINVAL;
+	}
+
+	if (!tb[QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC]) {
+		ath10k_warn(ar, "invalid SAR specification list\n");
+		return -EINVAL;
+	}
+
+	nla_for_each_nested(spec_list, tb[QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC], rem) {
+		if (nla_parse(spec,
+			      QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_MAX,
+			      nla_data(spec_list),
+			      nla_len(spec_list),
+			      sar_limits_policy,
+			      NULL)) {
+			ath10k_warn(ar, "nla_parse failed for SAR Spec list\n");
+			return -EINVAL;
+		}
+
+		if (spec[QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_POWER_LIMIT]) {
+			limit = nla_get_u32(
+				spec[QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_POWER_LIMIT]);
+		} else {
+			ath10k_warn(ar, "not have spec power limit\n");
+			return -EINVAL;
+		}
+
+		if (spec[QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_BAND]) {
+			band = nla_get_u32(
+				spec[QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_BAND]);
+		} else {
+			/* if QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_BAND is
+			 * unset the limit applies to both bands
+			 */
+			if (limit <= ar->hw_max_tx_power) {
+				ar->tx_power_2g_limit = limit;
+				ar->tx_power_5g_limit = limit;
+				sar_valid = true;
+			}
+
+			break;
+		}
+
+		sar_valid = true;
+		if (band == NL80211_BAND_2GHZ && limit <= ar->hw_max_tx_power)
+			ar->tx_power_2g_limit = limit;
+		else if (band == NL80211_BAND_5GHZ && limit <= ar->hw_max_tx_power)
+			ar->tx_power_5g_limit = limit;
+	}
+
+	if (sar_valid)
+		return ath10k_mac_set_sar_power_limit(ar);
+
+	return 0;
+}
+
+static const struct wiphy_vendor_command ath10k_vendor_commands[] = {
+	{
+		.info = {
+			.vendor_id = QCA_NL80211_VENDOR_ID,
+			.subcmd = QCA_NL80211_VENDOR_SUBCMD_SET_SAR_LIMITS,
+		},
+		.flags = WIPHY_VENDOR_CMD_NEED_WDEV |
+			 WIPHY_VENDOR_CMD_NEED_RUNNING,
+		.doit = ath10k_vendor_set_dynamic_sar_power_limits,
+		.policy = sar_limits_policy,
+	}
+};
+
+void ath10k_vendor_register(struct ath10k *ar)
+{
+	ar->hw->wiphy->vendor_commands = ath10k_vendor_commands;
+	ar->hw->wiphy->n_vendor_commands = ARRAY_SIZE(ath10k_vendor_commands);
+}
+
diff --git a/drivers/net/wireless/ath/ath10k/vendor.h b/drivers/net/wireless/ath/ath10k/vendor.h
new file mode 100644
index 000000000000..827614cb6991
--- /dev/null
+++ b/drivers/net/wireless/ath/ath10k/vendor.h
@@ -0,0 +1,13 @@ 
+/* SPDX-License-Identifier: ISC */
+/*
+ * Copyright (c) 2019 The Linux Foundation. All rights reserved.
+ */
+
+#ifndef _VENDOR_H_
+#define _VENDOR_H_
+
+#include <linux/kernel.h>
+
+void ath10k_vendor_register(struct ath10k *ar);
+
+#endif /* _VENDOR_H_ */
diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h
index 972d53d77654..f0cadaa12399 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.h
+++ b/drivers/net/wireless/ath/ath10k/wmi.h
@@ -3695,6 +3695,12 @@  struct wmi_csa_event {
 #define VDEV_DEFAULT_STATS_UPDATE_PERIOD    500
 #define PEER_DEFAULT_STATS_UPDATE_PERIOD    500
 
+/* the mask of 4 sub band of 5G for SAR parameters */
+#define ATH10K_WMI_SAR_5G_0_MASK GENMASK(7, 0)
+#define ATH10K_WMI_SAR_5G_1_MASK GENMASK(15, 8)
+#define ATH10K_WMI_SAR_5G_2_MASK GENMASK(23, 16)
+#define ATH10K_WMI_SAR_5G_3_MASK GENMASK(31, 24)
+
 struct wmi_pdev_param_map {
 	u32 tx_chain_mask;
 	u32 rx_chain_mask;