@@ -12,6 +12,7 @@
#include <linux/property.h>
#include <linux/regulator/consumer.h>
#include <linux/of_address.h>
+#include <linux/iommu.h>
#include "ce.h"
#include "coredump.h"
@@ -1499,6 +1500,111 @@ static int ath10k_setup_msa_resources(struct ath10k *ar, u32 msa_size)
return 0;
}
+static int ath10k_fw_init(struct ath10k *ar)
+{
+ struct ath10k_snoc *ar_snoc = ath10k_snoc_priv(ar);
+ struct device *host_dev = &ar_snoc->dev->dev;
+ struct platform_device_info info;
+ struct iommu_domain *iommu_dom;
+ struct platform_device *pdev;
+ struct device_node *node;
+ int ret;
+
+ node = of_get_child_by_name(host_dev->of_node, "wifi-firmware");
+ if (!node) {
+ ar_snoc->use_tz = true;
+ return 0;
+ }
+
+ memset(&info, 0, sizeof(info));
+ info.fwnode = &node->fwnode;
+ info.parent = host_dev;
+ info.name = node->name;
+ info.dma_mask = DMA_BIT_MASK(32);
+
+ pdev = platform_device_register_full(&info);
+ if (IS_ERR(pdev)) {
+ of_node_put(node);
+ return PTR_ERR(pdev);
+ }
+
+ pdev->dev.of_node = node;
+
+ ret = of_dma_configure(&pdev->dev, node, true);
+ if (ret) {
+ ath10k_err(ar, "dma configure fail: %d\n", ret);
+ goto err_unregister;
+ }
+
+ ar_snoc->fw.dev = &pdev->dev;
+
+ iommu_dom = iommu_domain_alloc(&platform_bus_type);
+ if (!iommu_dom) {
+ ath10k_err(ar, "failed to allocate iommu domain\n");
+ ret = -ENOMEM;
+ goto err_unregister;
+ }
+
+ ret = iommu_attach_device(iommu_dom, ar_snoc->fw.dev);
+ if (ret) {
+ ath10k_err(ar, "could not attach device: %d\n", ret);
+ goto err_iommu_free;
+ }
+
+ ar_snoc->fw.iommu_domain = iommu_dom;
+ ar_snoc->fw.fw_start_addr = ar->msa.paddr;
+
+ ret = iommu_map(iommu_dom, ar_snoc->fw.fw_start_addr,
+ ar->msa.paddr, ar->msa.mem_size,
+ IOMMU_READ | IOMMU_WRITE);
+ if (ret) {
+ ath10k_err(ar, "failed to map firmware region: %d\n", ret);
+ goto err_iommu_detach;
+ }
+
+ of_node_put(node);
+
+ return 0;
+
+err_iommu_detach:
+ iommu_detach_device(iommu_dom, ar_snoc->fw.dev);
+
+err_iommu_free:
+ iommu_domain_free(iommu_dom);
+
+err_unregister:
+ platform_device_unregister(pdev);
+ of_node_put(node);
+
+ return ret;
+}
+
+static int ath10k_fw_deinit(struct ath10k *ar)
+{
+ struct ath10k_snoc *ar_snoc = ath10k_snoc_priv(ar);
+ const size_t mapped_size = ar_snoc->fw.mapped_mem_size;
+ struct iommu_domain *iommu;
+ size_t unmapped_size;
+
+ if (ar_snoc->use_tz)
+ return 0;
+
+ iommu = ar_snoc->fw.iommu_domain;
+
+ unmapped_size = iommu_unmap(iommu, ar_snoc->fw.fw_start_addr,
+ mapped_size);
+ if (unmapped_size != mapped_size)
+ ath10k_err(ar, "failed to unmap firmware: %zu\n",
+ unmapped_size);
+
+ iommu_detach_device(iommu, ar_snoc->fw.dev);
+ iommu_domain_free(iommu);
+
+ platform_device_unregister(to_platform_device(ar_snoc->fw.dev));
+
+ return 0;
+}
+
static const struct of_device_id ath10k_snoc_dt_match[] = {
{ .compatible = "qcom,wcn3990-wifi",
.data = &drv_priv,
@@ -1607,16 +1713,25 @@ static int ath10k_snoc_probe(struct platform_device *pdev)
goto err_power_off;
}
+ ret = ath10k_fw_init(ar);
+ if (ret) {
+ ath10k_err(ar, "failed to initialize firmware: %d\n", ret);
+ goto err_power_off;
+ }
+
ret = ath10k_qmi_init(ar, msa_size);
if (ret) {
ath10k_warn(ar, "failed to register wlfw qmi client: %d\n", ret);
- goto err_power_off;
+ goto err_fw_deinit;
}
ath10k_dbg(ar, ATH10K_DBG_SNOC, "snoc probe\n");
return 0;
+err_fw_deinit:
+ ath10k_fw_deinit(ar);
+
err_power_off:
ath10k_hw_power_off(ar);
@@ -1648,6 +1763,7 @@ static int ath10k_snoc_remove(struct platform_device *pdev)
ath10k_core_unregister(ar);
ath10k_hw_power_off(ar);
+ ath10k_fw_deinit(ar);
ath10k_snoc_free_irq(ar);
ath10k_snoc_release_resource(ar);
ath10k_qmi_deinit(ar);
@@ -55,6 +55,13 @@ struct regulator_bulk_data;
struct ath10k_snoc {
struct platform_device *dev;
struct ath10k *ar;
+ unsigned int use_tz;
+ struct ath10k_firmware {
+ struct device *dev;
+ dma_addr_t fw_start_addr;
+ struct iommu_domain *iommu_domain;
+ size_t mapped_mem_size;
+ } fw;
void __iomem *mem;
dma_addr_t mem_pa;
struct ath10k_snoc_target_info target_info;
Add the support to attach and map iommu domain for targets which do not have the support of TrustZone. Tested HW: WCN3990 Tested FW: WLAN.HL.3.1-01040-QCAHLSWMTPLZ-1 Signed-off-by: Rakesh Pillai <pillair@codeaurora.org> --- drivers/net/wireless/ath/ath10k/snoc.c | 118 ++++++++++++++++++++++++++++++++- drivers/net/wireless/ath/ath10k/snoc.h | 7 ++ 2 files changed, 124 insertions(+), 1 deletion(-)