@@ -327,6 +327,7 @@ struct ath10k_debug {
u32 fw_dbglog_mask;
u32 pktlog_filter;
u32 reg_addr;
+ u32 nf_cal_period;
u8 htt_max_amsdu;
u8 htt_max_ampdu;
@@ -1608,6 +1608,73 @@ static const struct file_operations fops_cal_data = {
.llseek = default_llseek,
};
+static ssize_t ath10k_read_nf_cal_period(struct file *file,
+ char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct ath10k *ar = file->private_data;
+ unsigned int len;
+ char buf[32];
+
+ len = scnprintf(buf, sizeof(buf), "%d\n",
+ ar->debug.nf_cal_period);
+
+ return simple_read_from_buffer(user_buf, count, ppos, buf, len);
+}
+
+static ssize_t ath10k_write_nf_cal_period(struct file *file,
+ const char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct ath10k *ar = file->private_data;
+ unsigned long period;
+ int ret;
+
+ ret = kstrtoul_from_user(user_buf, count, 0, &period);
+ if (ret)
+ return ret;
+
+ if (period > WMI_PDEV_PARAM_CAL_PERIOD_MAX)
+ return -EINVAL;
+
+ /* there's no way to switch back to the firmware default */
+ if (period == 0)
+ return -EINVAL;
+
+ mutex_lock(&ar->conf_mutex);
+
+ ar->debug.nf_cal_period = period;
+
+ if (ar->state != ATH10K_STATE_ON) {
+ /* firmware is not running, nothing else to do */
+ ret = count;
+ goto exit;
+ }
+
+ ret = ath10k_wmi_pdev_set_param(ar, ar->wmi.pdev_param->cal_period,
+ ar->debug.nf_cal_period);
+ if (ret) {
+ ath10k_warn(ar, "cal period cfg failed from debugfs: %d\n",
+ ret);
+ goto exit;
+ }
+
+ ret = count;
+
+exit:
+ mutex_unlock(&ar->conf_mutex);
+
+ return ret;
+}
+
+static const struct file_operations fops_nf_cal_period = {
+ .read = ath10k_read_nf_cal_period,
+ .write = ath10k_write_nf_cal_period,
+ .open = simple_open,
+ .owner = THIS_MODULE,
+ .llseek = default_llseek,
+};
+
int ath10k_debug_start(struct ath10k *ar)
{
int ret;
@@ -1643,6 +1710,16 @@ int ath10k_debug_start(struct ath10k *ar)
ath10k_warn(ar, "failed to disable pktlog: %d\n", ret);
}
+ if (ar->debug.nf_cal_period) {
+ ret = ath10k_wmi_pdev_set_param(ar,
+ ar->wmi.pdev_param->cal_period,
+ ar->debug.nf_cal_period);
+ if (ret)
+ /* not serious */
+ ath10k_warn(ar, "cal period cfg failed from debug start: %d\n",
+ ret);
+ }
+
return ret;
}
@@ -1881,6 +1958,9 @@ int ath10k_debug_register(struct ath10k *ar)
debugfs_create_file("cal_data", S_IRUSR, ar->debug.debugfs_phy,
ar, &fops_cal_data);
+ debugfs_create_file("nf_cal_period", S_IRUSR | S_IWUSR,
+ ar->debug.debugfs_phy, ar, &fops_nf_cal_period);
+
if (config_enabled(CONFIG_ATH10K_DFS_CERTIFIED)) {
debugfs_create_file("dfs_simulate_radar", S_IWUSR,
ar->debug.debugfs_phy, ar,
@@ -2096,6 +2096,7 @@ static struct wmi_pdev_param_map wmi_tlv_pdev_param_map = {
.fast_channel_reset = WMI_TLV_PDEV_PARAM_UNSUPPORTED,
.burst_dur = WMI_TLV_PDEV_PARAM_BURST_DUR,
.burst_enable = WMI_TLV_PDEV_PARAM_BURST_ENABLE,
+ .cal_period = WMI_PDEV_PARAM_UNSUPPORTED,
};
static struct wmi_vdev_param_map wmi_tlv_vdev_param_map = {
@@ -436,6 +436,7 @@ static struct wmi_pdev_param_map wmi_pdev_param_map = {
.fast_channel_reset = WMI_PDEV_PARAM_UNSUPPORTED,
.burst_dur = WMI_PDEV_PARAM_UNSUPPORTED,
.burst_enable = WMI_PDEV_PARAM_UNSUPPORTED,
+ .cal_period = WMI_PDEV_PARAM_UNSUPPORTED,
};
static struct wmi_pdev_param_map wmi_10x_pdev_param_map = {
@@ -488,6 +489,7 @@ static struct wmi_pdev_param_map wmi_10x_pdev_param_map = {
.fast_channel_reset = WMI_10X_PDEV_PARAM_FAST_CHANNEL_RESET,
.burst_dur = WMI_10X_PDEV_PARAM_BURST_DUR,
.burst_enable = WMI_10X_PDEV_PARAM_BURST_ENABLE,
+ .cal_period = WMI_10X_PDEV_PARAM_CAL_PERIOD,
};
/* firmware 10.2 specific mappings */
@@ -2583,6 +2583,7 @@ struct wmi_pdev_param_map {
u32 fast_channel_reset;
u32 burst_dur;
u32 burst_enable;
+ u32 cal_period;
};
#define WMI_PDEV_PARAM_UNSUPPORTED 0
@@ -2803,6 +2804,9 @@ struct wmi_pdev_set_param_cmd {
__le32 param_value;
} __packed;
+/* valid period is 1 ~ 60000ms, unit in millisecond */
+#define WMI_PDEV_PARAM_CAL_PERIOD_MAX 60000
+
struct wmi_pdev_get_tpc_config_cmd {
/* parameter */
__le32 param;