@@ -6956,42 +6956,6 @@ static void ath10k_sta_rc_update(struct ieee80211_hw *hw,
ieee80211_queue_work(hw, &arsta->update_wk);
}
-static u64 ath10k_get_tsf(struct ieee80211_hw *hw, struct ieee80211_vif *vif)
-{
- /*
- * FIXME: Return 0 for time being. Need to figure out whether FW
- * has the API to fetch 64-bit local TSF
- */
-
- return 0;
-}
-
-static void ath10k_set_tsf(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
- u64 tsf)
-{
- struct ath10k *ar = hw->priv;
- struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
- u32 tsf_offset, vdev_param = ar->wmi.vdev_param->set_tsf;
- int ret;
-
- /* Workaround:
- *
- * Given tsf argument is entire TSF value, but firmware accepts
- * only TSF offset to current TSF.
- *
- * get_tsf function is used to get offset value, however since
- * ath10k_get_tsf is not implemented properly, it will return 0 always.
- * Luckily all the caller functions to set_tsf, as of now, also rely on
- * get_tsf function to get entire tsf value such get_tsf() + tsf_delta,
- * final tsf offset value to firmware will be arithmetically correct.
- */
- tsf_offset = tsf - ath10k_get_tsf(hw, vif);
- ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id,
- vdev_param, tsf_offset);
- if (ret && ret != -EOPNOTSUPP)
- ath10k_warn(ar, "failed to set tsf offset: %d\n", ret);
-}
-
static void ath10k_offset_tsf(struct ieee80211_hw *hw,
struct ieee80211_vif *vif, s64 tsf_offset)
{
@@ -7477,8 +7441,6 @@ static const struct ieee80211_ops ath10k_ops = {
.get_survey = ath10k_get_survey,
.set_bitrate_mask = ath10k_mac_op_set_bitrate_mask,
.sta_rc_update = ath10k_sta_rc_update,
- .get_tsf = ath10k_get_tsf,
- .set_tsf = ath10k_set_tsf,
.offset_tsf = ath10k_offset_tsf,
.ampdu_action = ath10k_ampdu_action,
.get_et_sset_count = ath10k_debug_get_et_sset_count,
@@ -3464,7 +3464,6 @@ static struct wmi_vdev_param_map wmi_tlv_vdev_param_map = {
.meru_vc = WMI_VDEV_PARAM_UNSUPPORTED,
.rx_decap_type = WMI_VDEV_PARAM_UNSUPPORTED,
.bw_nss_ratemask = WMI_VDEV_PARAM_UNSUPPORTED,
- .set_tsf = WMI_VDEV_PARAM_UNSUPPORTED,
};
static const struct wmi_ops wmi_tlv_ops = {
@@ -785,7 +785,6 @@ static struct wmi_vdev_param_map wmi_vdev_param_map = {
.meru_vc = WMI_VDEV_PARAM_UNSUPPORTED,
.rx_decap_type = WMI_VDEV_PARAM_UNSUPPORTED,
.bw_nss_ratemask = WMI_VDEV_PARAM_UNSUPPORTED,
- .set_tsf = WMI_VDEV_PARAM_UNSUPPORTED,
};
/* 10.X WMI VDEV param map */
@@ -861,7 +860,6 @@ static struct wmi_vdev_param_map wmi_10x_vdev_param_map = {
.meru_vc = WMI_VDEV_PARAM_UNSUPPORTED,
.rx_decap_type = WMI_VDEV_PARAM_UNSUPPORTED,
.bw_nss_ratemask = WMI_VDEV_PARAM_UNSUPPORTED,
- .set_tsf = WMI_VDEV_PARAM_UNSUPPORTED,
};
static struct wmi_vdev_param_map wmi_10_2_4_vdev_param_map = {
@@ -936,7 +934,6 @@ static struct wmi_vdev_param_map wmi_10_2_4_vdev_param_map = {
.meru_vc = WMI_VDEV_PARAM_UNSUPPORTED,
.rx_decap_type = WMI_VDEV_PARAM_UNSUPPORTED,
.bw_nss_ratemask = WMI_VDEV_PARAM_UNSUPPORTED,
- .set_tsf = WMI_10X_VDEV_PARAM_TSF_INCREMENT,
};
static struct wmi_vdev_param_map wmi_10_4_vdev_param_map = {
@@ -1012,7 +1009,6 @@ static struct wmi_vdev_param_map wmi_10_4_vdev_param_map = {
.meru_vc = WMI_10_4_VDEV_PARAM_MERU_VC,
.rx_decap_type = WMI_10_4_VDEV_PARAM_RX_DECAP_TYPE,
.bw_nss_ratemask = WMI_10_4_VDEV_PARAM_BW_NSS_RATEMASK,
- .set_tsf = WMI_10_4_VDEV_PARAM_TSF_INCREMENT,
.inc_tsf = WMI_10_4_VDEV_PARAM_TSF_INCREMENT,
.dec_tsf = WMI_10_4_VDEV_PARAM_TSF_DECREMENT,
};
@@ -4676,7 +4676,6 @@ struct wmi_vdev_param_map {
u32 meru_vc;
u32 rx_decap_type;
u32 bw_nss_ratemask;
- u32 set_tsf;
u32 inc_tsf;
u32 dec_tsf;
};
Neither of these did the right thing: - get_tsf just returned 0 - set_tsf assumed a simple offset was applied against get_tsf(), which works, except in the case of calculating TSF from rx_mactime (actual TSF). Just remove them for now. We can reimplement set_tsf in terms of TSF increment/decrement in the future if get_tsf is ever supported by FW. Signed-off-by: Thomas Pedersen <twp@qca.qualcomm.com> --- drivers/net/wireless/ath/ath10k/mac.c | 38 ------------------------------- drivers/net/wireless/ath/ath10k/wmi-tlv.c | 1 - drivers/net/wireless/ath/ath10k/wmi.c | 4 ---- drivers/net/wireless/ath/ath10k/wmi.h | 1 - 4 files changed, 44 deletions(-)