@@ -524,6 +524,8 @@ struct ath10k_sta {
u32 rx_rate_code;
u32 rx_bitrate_kbps;
+ u32 tx_rate_code;
+ u32 tx_bitrate_kbps;
struct work_struct update_wk;
u64 rx_duration;
struct ath10k_htt_tx_stats *tx_stats;
@@ -8497,6 +8497,16 @@ static void ath10k_mac_sta_get_peer_stats_info(struct ath10k *ar,
arsta->rx_rate_code = 0;
arsta->rx_bitrate_kbps = 0;
}
+
+ if (arsta->tx_rate_code != 0 && arsta->tx_bitrate_kbps != 0) {
+ ath10k_mac_parse_bitrate(ar, arsta->tx_rate_code,
+ arsta->tx_bitrate_kbps,
+ &sinfo->txrate);
+
+ sinfo->filled |= BIT_ULL(NL80211_STA_INFO_TX_BITRATE);
+ arsta->tx_rate_code = 0;
+ arsta->tx_bitrate_kbps = 0;
+ }
}
static void ath10k_sta_statistics(struct ieee80211_hw *hw,
@@ -249,6 +249,8 @@ static int ath10k_wmi_tlv_parse_peer_stats_info(struct ath10k *ar, u16 tag, u16
arsta = (struct ath10k_sta *)sta->drv_priv;
arsta->rx_rate_code = __le32_to_cpu(stat->last_rx_rate_code);
arsta->rx_bitrate_kbps = __le32_to_cpu(stat->last_rx_bitrate_kbps);
+ arsta->tx_rate_code = __le32_to_cpu(stat->last_tx_rate_code);
+ arsta->tx_bitrate_kbps = __le32_to_cpu(stat->last_tx_bitrate_kbps);
return 0;
}
For legacy mode, tx bitrate not show correct sometimes, for example: iw wlan0 link Connected to 8c:21:0a:b3:5a:64 (on wlan0) SSID: tplinkgw freq: 2462 RX: 19672 bytes (184 packets) TX: 9851 bytes (87 packets) signal: -51 dBm rx bitrate: 54.0 MBit/s tx bitrate: 2.8 MBit/s This patch use the tx bitrate info from WMI_TLV_PEER_STATS_INFO_EVENTID report from firmware, and tx bitrate show correct. iw wlan0 link Connected to 8c:21:0a:b3:5a:64 (on wlan0) SSID: tplinkgw freq: 2462 RX: 13973 bytes (120 packets) TX: 6737 bytes (57 packets) signal: -52 dBm rx bitrate: 54.0 MBit/s tx bitrate: 54.0 MBit/s This patch only effect SDIO chip, ath10k_mac_sta_get_peer_stats_info has check for bitrate_statistics of hw_params, it is enabled only for "qca6174 hw3.2 sdio". Tested with QCA6174 SDIO with firmware WLAN.RMH.4.4.1-00042. Signed-off-by: Wen Gong <wgong@codeaurora.org> --- drivers/net/wireless/ath/ath10k/core.h | 2 ++ drivers/net/wireless/ath/ath10k/mac.c | 10 ++++++++++ drivers/net/wireless/ath/ath10k/wmi-tlv.c | 2 ++ 3 files changed, 14 insertions(+)