@@ -970,9 +970,9 @@ static const struct sdio_device_id brcmf_sdmmc_ids[] = {
BRCMF_SDIO_DEVICE(SDIO_DEVICE_ID_BROADCOM_4354),
BRCMF_SDIO_DEVICE(SDIO_DEVICE_ID_BROADCOM_4356),
BRCMF_SDIO_DEVICE(SDIO_DEVICE_ID_BROADCOM_4359),
- BRCMF_SDIO_DEVICE(SDIO_DEVICE_ID_CYPRESS_4373),
- BRCMF_SDIO_DEVICE(SDIO_DEVICE_ID_CYPRESS_43012),
- BRCMF_SDIO_DEVICE(SDIO_DEVICE_ID_CYPRESS_89359),
+ BRCMF_SDIO_DEVICE(SDIO_DEVICE_ID_BROADCOM_CYPRESS_4373),
+ BRCMF_SDIO_DEVICE(SDIO_DEVICE_ID_BROADCOM_CYPRESS_43012),
+ BRCMF_SDIO_DEVICE(SDIO_DEVICE_ID_BROADCOM_CYPRESS_89359),
{ /* end: all zeroes */ }
};
MODULE_DEVICE_TABLE(sdio, brcmf_sdmmc_ids);
@@ -4187,7 +4187,7 @@ static void brcmf_sdio_firmware_callback(struct device *dev, int err,
bus->hostintmask, NULL);
switch (sdiod->func1->device) {
- case SDIO_DEVICE_ID_CYPRESS_4373:
+ case SDIO_DEVICE_ID_BROADCOM_CYPRESS_4373:
brcmf_dbg(INFO, "set F2 watermark to 0x%x*4 bytes\n",
CY_4373_F2_WATERMARK);
brcmf_sdiod_writeb(sdiod, SBSDIO_WATERMARK,
@@ -4201,7 +4201,7 @@ static void brcmf_sdio_firmware_callback(struct device *dev, int err,
CY_4373_F2_WATERMARK |
SBSDIO_MESBUSYCTRL_ENAB, &err);
break;
- case SDIO_DEVICE_ID_CYPRESS_43012:
+ case SDIO_DEVICE_ID_BROADCOM_CYPRESS_43012:
brcmf_dbg(INFO, "set F2 watermark to 0x%x*4 bytes\n",
CY_43012_F2_WATERMARK);
brcmf_sdiod_writeb(sdiod, SBSDIO_WATERMARK,
@@ -58,9 +58,9 @@
#define SDIO_DEVICE_ID_BROADCOM_4354 0x4354
#define SDIO_DEVICE_ID_BROADCOM_4356 0x4356
#define SDIO_DEVICE_ID_BROADCOM_4359 0x4359
-#define SDIO_DEVICE_ID_CYPRESS_4373 0x4373
-#define SDIO_DEVICE_ID_CYPRESS_43012 43012
-#define SDIO_DEVICE_ID_CYPRESS_89359 0x4355
+#define SDIO_DEVICE_ID_BROADCOM_CYPRESS_4373 0x4373
+#define SDIO_DEVICE_ID_BROADCOM_CYPRESS_43012 0xa804
+#define SDIO_DEVICE_ID_BROADCOM_CYPRESS_89359 0x4355
#define SDIO_VENDOR_ID_INTEL 0x0089
#define SDIO_DEVICE_ID_INTEL_IWMC3200WIMAX 0x1402
All macro names for SDIO device IDs are prefixed by vendor name to which device ID belongs. So for consistency add Broadcom string vendor prefix to all Cypress macro names as they belong to SDIO Broadcom vendor ID. Change also Cypress 43012 value from decimal do hexadecimal notation to be consistent with all other values. Signed-off-by: Pali Rohár <pali@kernel.org> --- drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c | 6 +++--- drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c | 4 ++-- include/linux/mmc/sdio_ids.h | 6 +++--- 3 files changed, 8 insertions(+), 8 deletions(-)