| Message ID | 1687986571-16823-9-git-send-email-wufan@linux.microsoft.com (mailing list archive) |
|---|---|
| State | Handled Elsewhere |
| Delegated to: | Paul Moore |
| Headers | show |
| Series | Integrity Policy Enforcement LSM (IPE) | expand |
On Jun 28, 2023 Fan Wu <wufan@linux.microsoft.com> wrote: > > Users of IPE require a way to identify when and why an operation fails, > allowing them to both respond to violations of policy and be notified > of potentially malicious actions on their systems with respect to IPE > itself. > > This patch introduces 3 new audit events. > > AUDIT_IPE_ACCESS(1420) indicates the result of an IPE policy evaluation > of a resource. > AUDIT_IPE_CONFIG_CHANGE(1421) indicates the current active IPE policy > has been changed to another loaded policy. > AUDIT_IPE_POLICY_LOAD(1422) indicates a new IPE policy has been loaded > into the kernel. > > This patch also adds support for success auditing, allowing users to > identify why an allow decision was made for a resource. However, it is > recommended to use this option with caution, as it is quite noisy. > > Here are some examples of the new audit record types: > > AUDIT_IPE_ACCESS(1420): > > audit: AUDIT1420 path="/root/vol/bin/hello" dev="sda" > ino=3897 rule="op=EXECUTE boot_verified=TRUE action=ALLOW" The 'dev' field is already in use by audit, and is used to log the device major and minor numbers, see audit_log_name() for an example. I would suggest adopting the existing 'dev' field format, but if you really want to log the device name as a string you will need to find another audit field name. > audit: AUDIT1420 path="/mnt/ipe/bin/hello" dev="dm-0" > ino=2 rule="DEFAULT action=DENY" > > audit: AUDIT1420 path="/tmp/tmpdp2h1lub/deny/bin/hello" dev="tmpfs" > ino=131 rule="DEFAULT action=DENY" > > The above three records were generated when the active IPE policy only > allows binaries from the initial booted drive(sda) to run. The three > identical `hello` binary were placed at different locations, only the > first hello from sda was allowed. > > Field path followed by the file's path name. > > Field dev followed by the device name as found in /dev where the file is > from. > Note that for device mappers it will use the name `dm-X` instead of > the name in /dev/mapper. > For a file in a temp file system, which is not from a device, it will use > `tmpfs` for the field. > The implementation of this part is following another existing use case > LSM_AUDIT_DATA_INODE in security/lsm_audit.c > > Field ino followed by the file's inode number. > > Field rule followed by the IPE rule made the access decision. The whole > rule must be audited because the decision is based on the combination of > all property conditions in the rule. > > Along with the syscall audit event, user can know why a blocked > happened. For example: > > audit: AUDIT1420 path="/mnt/ipe/bin/hello" dev="dm-0" > ino=2 rule="DEFAULT action=DENY" > audit[1956]: SYSCALL arch=c000003e syscall=59 > success=no exit=-13 a0=556790138df0 a1=556790135390 a2=5567901338b0 > a3=ab2a41a67f4f1f4e items=1 ppid=147 pid=1956 auid=4294967295 uid=0 > gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=pts0 > ses=4294967295 comm="bash" exe="/usr/bin/bash" key=(null) > > The above two records showed bash used execve to run "hello" and got > blocked by IPE. Note that the IPE records are always prior to a SYSCALL > record. > > AUDIT_IPE_CONFIG_CHANGE(1421): > > audit: AUDIT1421 > old_active_pol_name="Allow_All" old_active_pol_version=0.0.0 > old_policy_digest=sha256:E3B0C44298FC1C149AFBF4C8996FB92427AE41E4649B934CA495991B7852B855 > new_active_pol_name="boot_verified" new_active_pol_version=0.0.0 > new_policy_digest=sha256:820EEA5B40CA42B51F68962354BA083122A20BB846F26765076DD8EED7B8F4DB > auid=4294967295 ses=4294967295 lsm=ipe res=1 You can trim hash digest strings so they better fit in terminals, for example: old_policy_digest=sha256:E3B0C44.... > The above record showed the current IPE active policy switch from > `Allow_All` to `boot_verified` along with the version and the hash > digest of the two policies. Note IPE can only have one policy active > at a time, all access decision evaluation is based on the current active > policy. > The normal procedure to deploy a policy is loading the policy to deploy > into the kernel first, then switch the active policy to it. > > AUDIT_IPE_POLICY_LOAD(1422): > > audit: AUDIT1422 policy_name="boot_verified" policy_version=0.0.0 > policy_digest=sha256:820EEA5B40CA42B51F68962354BA083122A20BB846F26765076DD8EED7B8F4DB > auid=4294967295 ses=4294967295 lsm=ipe res=1 > > The above record showed a new policy has been loaded into the kernel > with the policy name, policy version and policy hash. > > Signed-off-by: Deven Bowers <deven.desai@linux.microsoft.com> > Signed-off-by: Fan Wu <wufan@linux.microsoft.com> > --- > include/uapi/linux/audit.h | 3 + > security/ipe/Kconfig | 2 +- > security/ipe/Makefile | 1 + > security/ipe/audit.c | 197 +++++++++++++++++++++++++++++++++++++ > security/ipe/audit.h | 18 ++++ > security/ipe/eval.c | 26 ++++- > security/ipe/eval.h | 8 ++ > security/ipe/fs.c | 71 +++++++++++++ > security/ipe/policy.c | 5 + > 9 files changed, 327 insertions(+), 4 deletions(-) > create mode 100644 security/ipe/audit.c > create mode 100644 security/ipe/audit.h ... > diff --git a/security/ipe/audit.c b/security/ipe/audit.c > new file mode 100644 > index 000000000000..d3f78a7fc93f > --- /dev/null > +++ b/security/ipe/audit.c > @@ -0,0 +1,197 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * Copyright (C) Microsoft Corporation. All rights reserved. > + */ > + > +#include <linux/slab.h> > +#include <linux/audit.h> > +#include <linux/types.h> > +#include <crypto/hash.h> > + > +#include "ipe.h" > +#include "eval.h" > +#include "hooks.h" > +#include "policy.h" > +#include "audit.h" > + > +#define ACTSTR(x) ((x) == __IPE_ACTION_ALLOW ? "ALLOW" : "DENY") > + > +#define IPE_AUDIT_HASH_ALG "sha256" > + > +#define AUDIT_POLICY_LOAD_FMT "policy_name=\"%s\" policy_version=%hu.%hu.%hu "\ > + "policy_digest=" IPE_AUDIT_HASH_ALG ":" > +#define AUDIT_OLD_ACTIVE_POLICY_FMT "old_active_pol_name=\"%s\" "\ > + "old_active_pol_version=%hu.%hu.%hu "\ > + "old_policy_digest=" IPE_AUDIT_HASH_ALG ":" > +#define AUDIT_NEW_ACTIVE_POLICY_FMT "new_active_pol_name=\"%s\" "\ > + "new_active_pol_version=%hu.%hu.%hu "\ > + "new_policy_digest=" IPE_AUDIT_HASH_ALG ":" > + > +static const char *const audit_op_names[__IPE_OP_MAX] = { > + "EXECUTE", > + "FIRMWARE", > + "KMODULE", > + "KEXEC_IMAGE", > + "KEXEC_INITRAMFS", > + "IMA_POLICY", > + "IMA_X509_CERT", > +}; > + > +static const char *const audit_prop_names[__IPE_PROP_MAX] = { > + "boot_verified=FALSE", > + "boot_verified=TRUE", > +}; > + > +/** > + * audit_rule - audit an IPE policy rule approximation. > + * @ab: Supplies a pointer to the audit_buffer to append to. > + * @r: Supplies a pointer to the ipe_rule to approximate a string form for. > + */ > +static void audit_rule(struct audit_buffer *ab, const struct ipe_rule *r) > +{ > + const struct ipe_prop *ptr; > + > + audit_log_format(ab, "rule=\"op=%s ", audit_op_names[r->op]); > + > + list_for_each_entry(ptr, &r->props, next) { > + audit_log_format(ab, "%s", audit_prop_names[ptr->type]); > + audit_log_format(ab, " "); Why make two calls to audit_log_format()? You can just use "%s " as the format string. > + } > + > + audit_log_format(ab, "action=%s\"", ACTSTR(r->action)); > +} > + > +/** > + * ipe_audit_match - audit a match for IPE policy. > + * @ctx: Supplies a pointer to the evaluation context that was used in the > + * evaluation. > + * @match_type: Supplies the scope of the match: rule, operation default, > + * global default. > + * @act: Supplies the IPE's evaluation decision, deny or allow. > + * @r: Supplies a pointer to the rule that was matched, if possible. > + * @enforce: Supplies the enforcement/permissive state at the point > + * the enforcement decision was made. > + */ > +void ipe_audit_match(const struct ipe_eval_ctx *const ctx, > + enum ipe_match match_type, > + enum ipe_action_type act, const struct ipe_rule *const r) > +{ > + struct inode *inode; > + struct audit_buffer *ab; > + const char *op = audit_op_names[ctx->op]; > + > + if (act != __IPE_ACTION_DENY && !READ_ONCE(success_audit)) > + return; > + > + ab = audit_log_start(audit_context(), GFP_KERNEL, AUDIT_IPE_ACCESS); > + if (!ab) > + return; > + > + if (ctx->file) { > + audit_log_d_path(ab, "path=", &ctx->file->f_path); > + inode = file_inode(ctx->file); > + if (inode) { > + audit_log_format(ab, " dev="); > + audit_log_untrustedstring(ab, inode->i_sb->s_id); See my comments above about using the 'dev' field name, however, you shouldn't need to log the device name as an untrusted string as the string is coming from a trusted source within the kernel (the driver). > + audit_log_format(ab, " ino=%lu ", inode->i_ino); > + } > + } > + > + if (match_type == __IPE_MATCH_RULE) > + audit_rule(ab, r); > + else if (match_type == __IPE_MATCH_TABLE) > + audit_log_format(ab, "rule=\"DEFAULT op=%s action=%s\"", op, > + ACTSTR(act)); > + else > + audit_log_format(ab, "rule=\"DEFAULT action=%s\"", > + ACTSTR(act)); > + > + audit_log_end(ab); > +} ... > diff --git a/security/ipe/eval.h b/security/ipe/eval.h > index 88c625d6af97..8fcdb2ea19f4 100644 > --- a/security/ipe/eval.h > +++ b/security/ipe/eval.h > @@ -13,6 +13,7 @@ > #include "policy.h" > > extern struct ipe_policy __rcu *ipe_active_policy; > +extern bool success_audit; > > struct ipe_eval_ctx { > enum ipe_op_type op; > @@ -21,6 +22,13 @@ struct ipe_eval_ctx { > bool from_init_sb; > }; > > +enum ipe_match { > + __IPE_MATCH_RULE = 0, > + __IPE_MATCH_TABLE, > + __IPE_MATCH_GLOBAL, > + __IPE_MATCH_MAX > +}; > + > void build_eval_ctx(struct ipe_eval_ctx *ctx, const struct file *file, enum ipe_op_type op); > int ipe_evaluate_event(const struct ipe_eval_ctx *const ctx); > void ipe_invalidate_pinned_sb(const struct super_block *mnt_sb); > diff --git a/security/ipe/fs.c b/security/ipe/fs.c > index 522162af741a..6bd2aa84831b 100644 > --- a/security/ipe/fs.c > +++ b/security/ipe/fs.c > @@ -8,11 +8,65 @@ > > #include "ipe.h" > #include "fs.h" > +#include "eval.h" > #include "policy.h" > +#include "audit.h" > > static struct dentry *np __ro_after_init; > static struct dentry *root __ro_after_init; > struct dentry *policy_root __ro_after_init; > +static struct dentry *audit_node __ro_after_init; > + > +/** > + * setaudit - Write handler for the securityfs node, "ipe/success_audit" > + * @f: Supplies a file structure representing the securityfs node. > + * @data: Supplies a buffer passed to the write syscall. > + * @len: Supplies the length of @data. > + * @offset: unused. > + * > + * Return: > + * * >0 - Success, Length of buffer written > + * * <0 - Error > + */ > +static ssize_t setaudit(struct file *f, const char __user *data, > + size_t len, loff_t *offset) > +{ > + int rc = 0; > + bool value; > + > + if (!file_ns_capable(f, &init_user_ns, CAP_MAC_ADMIN)) > + return -EPERM; > + > + value = READ_ONCE(success_audit); I don't understand why you are setting @value here only to change its value in the line below ... ? > + rc = kstrtobool_from_user(data, len, &value); > + if (rc) > + return rc; > + > + WRITE_ONCE(success_audit, value); > + > + return len; > +} -- paul-moore.com
On Sat, Jul 08, 2023 at 12:23:05AM -0400, Paul Moore wrote: > On Jun 28, 2023 Fan Wu <wufan@linux.microsoft.com> wrote: > > > > Users of IPE require a way to identify when and why an operation fails, > > allowing them to both respond to violations of policy and be notified > > of potentially malicious actions on their systems with respect to IPE > > itself. > > > > This patch introduces 3 new audit events. > > > > AUDIT_IPE_ACCESS(1420) indicates the result of an IPE policy evaluation > > of a resource. > > AUDIT_IPE_CONFIG_CHANGE(1421) indicates the current active IPE policy > > has been changed to another loaded policy. > > AUDIT_IPE_POLICY_LOAD(1422) indicates a new IPE policy has been loaded > > into the kernel. > > > > This patch also adds support for success auditing, allowing users to > > identify why an allow decision was made for a resource. However, it is > > recommended to use this option with caution, as it is quite noisy. > > > > Here are some examples of the new audit record types: > > > > AUDIT_IPE_ACCESS(1420): > > > > audit: AUDIT1420 path="/root/vol/bin/hello" dev="sda" > > ino=3897 rule="op=EXECUTE boot_verified=TRUE action=ALLOW" > > The 'dev' field is already in use by audit, and is used to log the > device major and minor numbers, see audit_log_name() for an example. > > I would suggest adopting the existing 'dev' field format, but if you > really want to log the device name as a string you will need to find > another audit field name. > Actually it was copied from https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/security/lsm_audit.c#n228 Personally I think using device name is better, I will try to add a new field. > > audit: AUDIT1420 path="/mnt/ipe/bin/hello" dev="dm-0" > > ino=2 rule="DEFAULT action=DENY" > > > > audit: AUDIT1420 path="/tmp/tmpdp2h1lub/deny/bin/hello" dev="tmpfs" > > ino=131 rule="DEFAULT action=DENY" > > > > The above three records were generated when the active IPE policy only > > allows binaries from the initial booted drive(sda) to run. The three > > identical `hello` binary were placed at different locations, only the > > first hello from sda was allowed. > > > > Field path followed by the file's path name. > > > > Field dev followed by the device name as found in /dev where the file is > > from. > > Note that for device mappers it will use the name `dm-X` instead of > > the name in /dev/mapper. > > For a file in a temp file system, which is not from a device, it will use > > `tmpfs` for the field. > > The implementation of this part is following another existing use case > > LSM_AUDIT_DATA_INODE in security/lsm_audit.c > > > > Field ino followed by the file's inode number. > > > > Field rule followed by the IPE rule made the access decision. The whole > > rule must be audited because the decision is based on the combination of > > all property conditions in the rule. > > > > Along with the syscall audit event, user can know why a blocked > > happened. For example: > > > > audit: AUDIT1420 path="/mnt/ipe/bin/hello" dev="dm-0" > > ino=2 rule="DEFAULT action=DENY" > > audit[1956]: SYSCALL arch=c000003e syscall=59 > > success=no exit=-13 a0=556790138df0 a1=556790135390 a2=5567901338b0 > > a3=ab2a41a67f4f1f4e items=1 ppid=147 pid=1956 auid=4294967295 uid=0 > > gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=pts0 > > ses=4294967295 comm="bash" exe="/usr/bin/bash" key=(null) > > > > The above two records showed bash used execve to run "hello" and got > > blocked by IPE. Note that the IPE records are always prior to a SYSCALL > > record. > > > > AUDIT_IPE_CONFIG_CHANGE(1421): > > > > audit: AUDIT1421 > > old_active_pol_name="Allow_All" old_active_pol_version=0.0.0 > > old_policy_digest=sha256:E3B0C44298FC1C149AFBF4C8996FB92427AE41E4649B934CA495991B7852B855 > > new_active_pol_name="boot_verified" new_active_pol_version=0.0.0 > > new_policy_digest=sha256:820EEA5B40CA42B51F68962354BA083122A20BB846F26765076DD8EED7B8F4DB > > auid=4294967295 ses=4294967295 lsm=ipe res=1 > > You can trim hash digest strings so they better fit in terminals, for > example: > > old_policy_digest=sha256:E3B0C44.... > Do you mean I could trim it in the documentation and for the real audit record I still record the whole hash? > > The above record showed the current IPE active policy switch from > > `Allow_All` to `boot_verified` along with the version and the hash > > digest of the two policies. Note IPE can only have one policy active > > at a time, all access decision evaluation is based on the current active > > policy. > > The normal procedure to deploy a policy is loading the policy to deploy > > into the kernel first, then switch the active policy to it. > > > > AUDIT_IPE_POLICY_LOAD(1422): > > > > audit: AUDIT1422 policy_name="boot_verified" policy_version=0.0.0 > > policy_digest=sha256:820EEA5B40CA42B51F68962354BA083122A20BB846F26765076DD8EED7B8F4DB > > auid=4294967295 ses=4294967295 lsm=ipe res=1 > > > > The above record showed a new policy has been loaded into the kernel > > with the policy name, policy version and policy hash. > > > > Signed-off-by: Deven Bowers <deven.desai@linux.microsoft.com> > > Signed-off-by: Fan Wu <wufan@linux.microsoft.com> > > --- > > include/uapi/linux/audit.h | 3 + > > security/ipe/Kconfig | 2 +- > > security/ipe/Makefile | 1 + > > security/ipe/audit.c | 197 +++++++++++++++++++++++++++++++++++++ > > security/ipe/audit.h | 18 ++++ > > security/ipe/eval.c | 26 ++++- > > security/ipe/eval.h | 8 ++ > > security/ipe/fs.c | 71 +++++++++++++ > > security/ipe/policy.c | 5 + > > 9 files changed, 327 insertions(+), 4 deletions(-) > > create mode 100644 security/ipe/audit.c > > create mode 100644 security/ipe/audit.h > > ... > > > diff --git a/security/ipe/audit.c b/security/ipe/audit.c > > new file mode 100644 > > index 000000000000..d3f78a7fc93f > > --- /dev/null > > +++ b/security/ipe/audit.c > > @@ -0,0 +1,197 @@ > > +// SPDX-License-Identifier: GPL-2.0 > > +/* > > + * Copyright (C) Microsoft Corporation. All rights reserved. > > + */ > > + > > +#include <linux/slab.h> > > +#include <linux/audit.h> > > +#include <linux/types.h> > > +#include <crypto/hash.h> > > + > > +#include "ipe.h" > > +#include "eval.h" > > +#include "hooks.h" > > +#include "policy.h" > > +#include "audit.h" > > + > > +#define ACTSTR(x) ((x) == __IPE_ACTION_ALLOW ? "ALLOW" : "DENY") > > + > > +#define IPE_AUDIT_HASH_ALG "sha256" > > + > > +#define AUDIT_POLICY_LOAD_FMT "policy_name=\"%s\" policy_version=%hu.%hu.%hu "\ > > + "policy_digest=" IPE_AUDIT_HASH_ALG ":" > > +#define AUDIT_OLD_ACTIVE_POLICY_FMT "old_active_pol_name=\"%s\" "\ > > + "old_active_pol_version=%hu.%hu.%hu "\ > > + "old_policy_digest=" IPE_AUDIT_HASH_ALG ":" > > +#define AUDIT_NEW_ACTIVE_POLICY_FMT "new_active_pol_name=\"%s\" "\ > > + "new_active_pol_version=%hu.%hu.%hu "\ > > + "new_policy_digest=" IPE_AUDIT_HASH_ALG ":" > > + > > +static const char *const audit_op_names[__IPE_OP_MAX] = { > > + "EXECUTE", > > + "FIRMWARE", > > + "KMODULE", > > + "KEXEC_IMAGE", > > + "KEXEC_INITRAMFS", > > + "IMA_POLICY", > > + "IMA_X509_CERT", > > +}; > > + > > +static const char *const audit_prop_names[__IPE_PROP_MAX] = { > > + "boot_verified=FALSE", > > + "boot_verified=TRUE", > > +}; > > + > > +/** > > + * audit_rule - audit an IPE policy rule approximation. > > + * @ab: Supplies a pointer to the audit_buffer to append to. > > + * @r: Supplies a pointer to the ipe_rule to approximate a string form for. > > + */ > > +static void audit_rule(struct audit_buffer *ab, const struct ipe_rule *r) > > +{ > > + const struct ipe_prop *ptr; > > + > > + audit_log_format(ab, "rule=\"op=%s ", audit_op_names[r->op]); > > + > > + list_for_each_entry(ptr, &r->props, next) { > > + audit_log_format(ab, "%s", audit_prop_names[ptr->type]); > > + audit_log_format(ab, " "); > > Why make two calls to audit_log_format()? You can just use "%s " as > the format string. > Yep, this code is kind of silly, I will change the format. Thanks for the advice. > > + } > > + > > + audit_log_format(ab, "action=%s\"", ACTSTR(r->action)); > > +} > > + > > +/** > > + * ipe_audit_match - audit a match for IPE policy. > > + * @ctx: Supplies a pointer to the evaluation context that was used in the > > + * evaluation. > > + * @match_type: Supplies the scope of the match: rule, operation default, > > + * global default. > > + * @act: Supplies the IPE's evaluation decision, deny or allow. > > + * @r: Supplies a pointer to the rule that was matched, if possible. > > + * @enforce: Supplies the enforcement/permissive state at the point > > + * the enforcement decision was made. > > + */ > > +void ipe_audit_match(const struct ipe_eval_ctx *const ctx, > > + enum ipe_match match_type, > > + enum ipe_action_type act, const struct ipe_rule *const r) > > +{ > > + struct inode *inode; > > + struct audit_buffer *ab; > > + const char *op = audit_op_names[ctx->op]; > > + > > + if (act != __IPE_ACTION_DENY && !READ_ONCE(success_audit)) > > + return; > > + > > + ab = audit_log_start(audit_context(), GFP_KERNEL, AUDIT_IPE_ACCESS); > > + if (!ab) > > + return; > > + > > + if (ctx->file) { > > + audit_log_d_path(ab, "path=", &ctx->file->f_path); > > + inode = file_inode(ctx->file); > > + if (inode) { > > + audit_log_format(ab, " dev="); > > + audit_log_untrustedstring(ab, inode->i_sb->s_id); > > See my comments above about using the 'dev' field name, however, you > shouldn't need to log the device name as an untrusted string as the > string is coming from a trusted source within the kernel (the driver). > I was trying to follow the existing code at https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/security/lsm_audit.c#n229 But I do agree as it is already in the kernel, it should be trusted. > > + audit_log_format(ab, " ino=%lu ", inode->i_ino); > > + } > > + } > > + > > + if (match_type == __IPE_MATCH_RULE) > > + audit_rule(ab, r); > > + else if (match_type == __IPE_MATCH_TABLE) > > + audit_log_format(ab, "rule=\"DEFAULT op=%s action=%s\"", op, > > + ACTSTR(act)); > > + else > > + audit_log_format(ab, "rule=\"DEFAULT action=%s\"", > > + ACTSTR(act)); > > + > > + audit_log_end(ab); > > +} > > ... > > > diff --git a/security/ipe/eval.h b/security/ipe/eval.h > > index 88c625d6af97..8fcdb2ea19f4 100644 > > --- a/security/ipe/eval.h > > +++ b/security/ipe/eval.h > > @@ -13,6 +13,7 @@ > > #include "policy.h" > > > > extern struct ipe_policy __rcu *ipe_active_policy; > > +extern bool success_audit; > > > > struct ipe_eval_ctx { > > enum ipe_op_type op; > > @@ -21,6 +22,13 @@ struct ipe_eval_ctx { > > bool from_init_sb; > > }; > > > > +enum ipe_match { > > + __IPE_MATCH_RULE = 0, > > + __IPE_MATCH_TABLE, > > + __IPE_MATCH_GLOBAL, > > + __IPE_MATCH_MAX > > +}; > > + > > void build_eval_ctx(struct ipe_eval_ctx *ctx, const struct file *file, enum ipe_op_type op); > > int ipe_evaluate_event(const struct ipe_eval_ctx *const ctx); > > void ipe_invalidate_pinned_sb(const struct super_block *mnt_sb); > > diff --git a/security/ipe/fs.c b/security/ipe/fs.c > > index 522162af741a..6bd2aa84831b 100644 > > --- a/security/ipe/fs.c > > +++ b/security/ipe/fs.c > > @@ -8,11 +8,65 @@ > > > > #include "ipe.h" > > #include "fs.h" > > +#include "eval.h" > > #include "policy.h" > > +#include "audit.h" > > > > static struct dentry *np __ro_after_init; > > static struct dentry *root __ro_after_init; > > struct dentry *policy_root __ro_after_init; > > +static struct dentry *audit_node __ro_after_init; > > + > > +/** > > + * setaudit - Write handler for the securityfs node, "ipe/success_audit" > > + * @f: Supplies a file structure representing the securityfs node. > > + * @data: Supplies a buffer passed to the write syscall. > > + * @len: Supplies the length of @data. > > + * @offset: unused. > > + * > > + * Return: > > + * * >0 - Success, Length of buffer written > > + * * <0 - Error > > + */ > > +static ssize_t setaudit(struct file *f, const char __user *data, > > + size_t len, loff_t *offset) > > +{ > > + int rc = 0; > > + bool value; > > + > > + if (!file_ns_capable(f, &init_user_ns, CAP_MAC_ADMIN)) > > + return -EPERM; > > + > > + value = READ_ONCE(success_audit); > > I don't understand why you are setting @value here only to change its > value in the line below ... ? > Sorry my mistake, I thought the value can be not set in the function call but after reading the source code I found it will return error in that case. I will remove the above line. -Fan > > + rc = kstrtobool_from_user(data, len, &value); > > + if (rc) > > + return rc; > > + > > + WRITE_ONCE(success_audit, value); > > + > > + return len; > > +} > > -- > paul-moore.com
On Fri, Jul 14, 2023 at 11:57 PM Fan Wu <wufan@linux.microsoft.com> wrote: > On Sat, Jul 08, 2023 at 12:23:05AM -0400, Paul Moore wrote: > > On Jun 28, 2023 Fan Wu <wufan@linux.microsoft.com> wrote: > > > > > > Users of IPE require a way to identify when and why an operation fails, > > > allowing them to both respond to violations of policy and be notified > > > of potentially malicious actions on their systems with respect to IPE > > > itself. > > > > > > This patch introduces 3 new audit events. > > > > > > AUDIT_IPE_ACCESS(1420) indicates the result of an IPE policy evaluation > > > of a resource. > > > AUDIT_IPE_CONFIG_CHANGE(1421) indicates the current active IPE policy > > > has been changed to another loaded policy. > > > AUDIT_IPE_POLICY_LOAD(1422) indicates a new IPE policy has been loaded > > > into the kernel. > > > > > > This patch also adds support for success auditing, allowing users to > > > identify why an allow decision was made for a resource. However, it is > > > recommended to use this option with caution, as it is quite noisy. > > > > > > Here are some examples of the new audit record types: > > > > > > AUDIT_IPE_ACCESS(1420): > > > > > > audit: AUDIT1420 path="/root/vol/bin/hello" dev="sda" > > > ino=3897 rule="op=EXECUTE boot_verified=TRUE action=ALLOW" > > > > The 'dev' field is already in use by audit, and is used to log the > > device major and minor numbers, see audit_log_name() for an example. > > > > I would suggest adopting the existing 'dev' field format, but if you > > really want to log the device name as a string you will need to find > > another audit field name. > > Actually it was copied from https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/security/lsm_audit.c#n228 > Personally I think using device name is better, I will try to add a new field. Ha, yes, it does look like the LSM code uses the device name as opposed to the major:minor format. Given that existing use, and that IPE is a LSM, sticking with 'dev=<name>' seems like the right thing to do. Sorry about that :/ > > > audit: AUDIT1420 path="/mnt/ipe/bin/hello" dev="dm-0" > > > ino=2 rule="DEFAULT action=DENY" > > > > > > audit: AUDIT1420 path="/tmp/tmpdp2h1lub/deny/bin/hello" dev="tmpfs" > > > ino=131 rule="DEFAULT action=DENY" > > > > > > The above three records were generated when the active IPE policy only > > > allows binaries from the initial booted drive(sda) to run. The three > > > identical `hello` binary were placed at different locations, only the > > > first hello from sda was allowed. > > > > > > Field path followed by the file's path name. > > > > > > Field dev followed by the device name as found in /dev where the file is > > > from. > > > Note that for device mappers it will use the name `dm-X` instead of > > > the name in /dev/mapper. > > > For a file in a temp file system, which is not from a device, it will use > > > `tmpfs` for the field. > > > The implementation of this part is following another existing use case > > > LSM_AUDIT_DATA_INODE in security/lsm_audit.c > > > > > > Field ino followed by the file's inode number. > > > > > > Field rule followed by the IPE rule made the access decision. The whole > > > rule must be audited because the decision is based on the combination of > > > all property conditions in the rule. > > > > > > Along with the syscall audit event, user can know why a blocked > > > happened. For example: > > > > > > audit: AUDIT1420 path="/mnt/ipe/bin/hello" dev="dm-0" > > > ino=2 rule="DEFAULT action=DENY" > > > audit[1956]: SYSCALL arch=c000003e syscall=59 > > > success=no exit=-13 a0=556790138df0 a1=556790135390 a2=5567901338b0 > > > a3=ab2a41a67f4f1f4e items=1 ppid=147 pid=1956 auid=4294967295 uid=0 > > > gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=pts0 > > > ses=4294967295 comm="bash" exe="/usr/bin/bash" key=(null) > > > > > > The above two records showed bash used execve to run "hello" and got > > > blocked by IPE. Note that the IPE records are always prior to a SYSCALL > > > record. > > > > > > AUDIT_IPE_CONFIG_CHANGE(1421): > > > > > > audit: AUDIT1421 > > > old_active_pol_name="Allow_All" old_active_pol_version=0.0.0 > > > old_policy_digest=sha256:E3B0C44298FC1C149AFBF4C8996FB92427AE41E4649B934CA495991B7852B855 > > > new_active_pol_name="boot_verified" new_active_pol_version=0.0.0 > > > new_policy_digest=sha256:820EEA5B40CA42B51F68962354BA083122A20BB846F26765076DD8EED7B8F4DB > > > auid=4294967295 ses=4294967295 lsm=ipe res=1 > > > > You can trim hash digest strings so they better fit in terminals, for > > example: > > > > old_policy_digest=sha256:E3B0C44.... > > Do you mean I could trim it in the documentation and for the real audit > record I still record the whole hash? Yes. Failure to record the full hash digest string in the record would be Very Bad, but for the sake of keeping the line lengths in the docs and commit description reasonable you can trim as necessary. After all, we all know what a full hash string looks like :) > > > The above record showed the current IPE active policy switch from > > > `Allow_All` to `boot_verified` along with the version and the hash > > > digest of the two policies. Note IPE can only have one policy active > > > at a time, all access decision evaluation is based on the current active > > > policy. > > > The normal procedure to deploy a policy is loading the policy to deploy > > > into the kernel first, then switch the active policy to it. > > > > > > AUDIT_IPE_POLICY_LOAD(1422): > > > > > > audit: AUDIT1422 policy_name="boot_verified" policy_version=0.0.0 > > > policy_digest=sha256:820EEA5B40CA42B51F68962354BA083122A20BB846F26765076DD8EED7B8F4DB > > > auid=4294967295 ses=4294967295 lsm=ipe res=1 > > > > > > The above record showed a new policy has been loaded into the kernel > > > with the policy name, policy version and policy hash. > > > > > > Signed-off-by: Deven Bowers <deven.desai@linux.microsoft.com> > > > Signed-off-by: Fan Wu <wufan@linux.microsoft.com> > > > --- > > > include/uapi/linux/audit.h | 3 + > > > security/ipe/Kconfig | 2 +- > > > security/ipe/Makefile | 1 + > > > security/ipe/audit.c | 197 +++++++++++++++++++++++++++++++++++++ > > > security/ipe/audit.h | 18 ++++ > > > security/ipe/eval.c | 26 ++++- > > > security/ipe/eval.h | 8 ++ > > > security/ipe/fs.c | 71 +++++++++++++ > > > security/ipe/policy.c | 5 + > > > 9 files changed, 327 insertions(+), 4 deletions(-) > > > create mode 100644 security/ipe/audit.c > > > create mode 100644 security/ipe/audit.h ... > > > +/** > > > + * ipe_audit_match - audit a match for IPE policy. > > > + * @ctx: Supplies a pointer to the evaluation context that was used in the > > > + * evaluation. > > > + * @match_type: Supplies the scope of the match: rule, operation default, > > > + * global default. > > > + * @act: Supplies the IPE's evaluation decision, deny or allow. > > > + * @r: Supplies a pointer to the rule that was matched, if possible. > > > + * @enforce: Supplies the enforcement/permissive state at the point > > > + * the enforcement decision was made. > > > + */ > > > +void ipe_audit_match(const struct ipe_eval_ctx *const ctx, > > > + enum ipe_match match_type, > > > + enum ipe_action_type act, const struct ipe_rule *const r) > > > +{ > > > + struct inode *inode; > > > + struct audit_buffer *ab; > > > + const char *op = audit_op_names[ctx->op]; > > > + > > > + if (act != __IPE_ACTION_DENY && !READ_ONCE(success_audit)) > > > + return; > > > + > > > + ab = audit_log_start(audit_context(), GFP_KERNEL, AUDIT_IPE_ACCESS); > > > + if (!ab) > > > + return; > > > + > > > + if (ctx->file) { > > > + audit_log_d_path(ab, "path=", &ctx->file->f_path); > > > + inode = file_inode(ctx->file); > > > + if (inode) { > > > + audit_log_format(ab, " dev="); > > > + audit_log_untrustedstring(ab, inode->i_sb->s_id); > > > > See my comments above about using the 'dev' field name, however, you > > shouldn't need to log the device name as an untrusted string as the > > string is coming from a trusted source within the kernel (the driver). > > I was trying to follow the existing code at https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/security/lsm_audit.c#n229 > But I do agree as it is already in the kernel, it should be trusted. Hmm. Given the existing code, I guess stick with the untrusted string variant for now. I'm concerned that there is some device naming code which might allow funky device names; although if you can prove that is not the case then you can use the normal audit logging functions. For reference, the characters that audit finds problematic can be found in audit_string_contains_control().
diff --git a/include/uapi/linux/audit.h b/include/uapi/linux/audit.h index d676ed2b246e..75e21a135483 100644 --- a/include/uapi/linux/audit.h +++ b/include/uapi/linux/audit.h @@ -143,6 +143,9 @@ #define AUDIT_MAC_UNLBL_STCDEL 1417 /* NetLabel: del a static label */ #define AUDIT_MAC_CALIPSO_ADD 1418 /* NetLabel: add CALIPSO DOI entry */ #define AUDIT_MAC_CALIPSO_DEL 1419 /* NetLabel: del CALIPSO DOI entry */ +#define AUDIT_IPE_ACCESS 1420 /* IPE denial or grant */ +#define AUDIT_IPE_CONFIG_CHANGE 1421 /* IPE config change */ +#define AUDIT_IPE_POLICY_LOAD 1422 /* IPE policy load */ #define AUDIT_FIRST_KERN_ANOM_MSG 1700 #define AUDIT_LAST_KERN_ANOM_MSG 1799 diff --git a/security/ipe/Kconfig b/security/ipe/Kconfig index e4875fb04883..ac4d558e69d5 100644 --- a/security/ipe/Kconfig +++ b/security/ipe/Kconfig @@ -5,7 +5,7 @@ menuconfig SECURITY_IPE bool "Integrity Policy Enforcement (IPE)" - depends on SECURITY && SECURITYFS + depends on SECURITY && SECURITYFS && AUDIT && AUDITSYSCALL select PKCS7_MESSAGE_PARSER select SYSTEM_DATA_VERIFICATION help diff --git a/security/ipe/Makefile b/security/ipe/Makefile index 8602d71250b4..89a76ad72301 100644 --- a/security/ipe/Makefile +++ b/security/ipe/Makefile @@ -13,3 +13,4 @@ obj-$(CONFIG_SECURITY_IPE) += \ policy.o \ policy_fs.o \ policy_parser.o \ + audit.o \ diff --git a/security/ipe/audit.c b/security/ipe/audit.c new file mode 100644 index 000000000000..d3f78a7fc93f --- /dev/null +++ b/security/ipe/audit.c @@ -0,0 +1,197 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) Microsoft Corporation. All rights reserved. + */ + +#include <linux/slab.h> +#include <linux/audit.h> +#include <linux/types.h> +#include <crypto/hash.h> + +#include "ipe.h" +#include "eval.h" +#include "hooks.h" +#include "policy.h" +#include "audit.h" + +#define ACTSTR(x) ((x) == __IPE_ACTION_ALLOW ? "ALLOW" : "DENY") + +#define IPE_AUDIT_HASH_ALG "sha256" + +#define AUDIT_POLICY_LOAD_FMT "policy_name=\"%s\" policy_version=%hu.%hu.%hu "\ + "policy_digest=" IPE_AUDIT_HASH_ALG ":" +#define AUDIT_OLD_ACTIVE_POLICY_FMT "old_active_pol_name=\"%s\" "\ + "old_active_pol_version=%hu.%hu.%hu "\ + "old_policy_digest=" IPE_AUDIT_HASH_ALG ":" +#define AUDIT_NEW_ACTIVE_POLICY_FMT "new_active_pol_name=\"%s\" "\ + "new_active_pol_version=%hu.%hu.%hu "\ + "new_policy_digest=" IPE_AUDIT_HASH_ALG ":" + +static const char *const audit_op_names[__IPE_OP_MAX] = { + "EXECUTE", + "FIRMWARE", + "KMODULE", + "KEXEC_IMAGE", + "KEXEC_INITRAMFS", + "IMA_POLICY", + "IMA_X509_CERT", +}; + +static const char *const audit_prop_names[__IPE_PROP_MAX] = { + "boot_verified=FALSE", + "boot_verified=TRUE", +}; + +/** + * audit_rule - audit an IPE policy rule approximation. + * @ab: Supplies a pointer to the audit_buffer to append to. + * @r: Supplies a pointer to the ipe_rule to approximate a string form for. + */ +static void audit_rule(struct audit_buffer *ab, const struct ipe_rule *r) +{ + const struct ipe_prop *ptr; + + audit_log_format(ab, "rule=\"op=%s ", audit_op_names[r->op]); + + list_for_each_entry(ptr, &r->props, next) { + audit_log_format(ab, "%s", audit_prop_names[ptr->type]); + audit_log_format(ab, " "); + } + + audit_log_format(ab, "action=%s\"", ACTSTR(r->action)); +} + +/** + * ipe_audit_match - audit a match for IPE policy. + * @ctx: Supplies a pointer to the evaluation context that was used in the + * evaluation. + * @match_type: Supplies the scope of the match: rule, operation default, + * global default. + * @act: Supplies the IPE's evaluation decision, deny or allow. + * @r: Supplies a pointer to the rule that was matched, if possible. + * @enforce: Supplies the enforcement/permissive state at the point + * the enforcement decision was made. + */ +void ipe_audit_match(const struct ipe_eval_ctx *const ctx, + enum ipe_match match_type, + enum ipe_action_type act, const struct ipe_rule *const r) +{ + struct inode *inode; + struct audit_buffer *ab; + const char *op = audit_op_names[ctx->op]; + + if (act != __IPE_ACTION_DENY && !READ_ONCE(success_audit)) + return; + + ab = audit_log_start(audit_context(), GFP_KERNEL, AUDIT_IPE_ACCESS); + if (!ab) + return; + + if (ctx->file) { + audit_log_d_path(ab, "path=", &ctx->file->f_path); + inode = file_inode(ctx->file); + if (inode) { + audit_log_format(ab, " dev="); + audit_log_untrustedstring(ab, inode->i_sb->s_id); + audit_log_format(ab, " ino=%lu ", inode->i_ino); + } + } + + if (match_type == __IPE_MATCH_RULE) + audit_rule(ab, r); + else if (match_type == __IPE_MATCH_TABLE) + audit_log_format(ab, "rule=\"DEFAULT op=%s action=%s\"", op, + ACTSTR(act)); + else + audit_log_format(ab, "rule=\"DEFAULT action=%s\"", + ACTSTR(act)); + + audit_log_end(ab); +} + +/** + * audit_policy - Audit a policy's name, version and thumbprint to @ab. + * @ab: Supplies a pointer to the audit buffer to append to. + * @p: Supplies a pointer to the policy to audit. + */ +static void audit_policy(struct audit_buffer *ab, + const char *audit_format, + const struct ipe_policy *const p) +{ + u8 *digest = NULL; + struct crypto_shash *tfm; + SHASH_DESC_ON_STACK(desc, tfm); + + tfm = crypto_alloc_shash(IPE_AUDIT_HASH_ALG, 0, 0); + if (IS_ERR(tfm)) + return; + + desc->tfm = tfm; + + digest = kzalloc(crypto_shash_digestsize(tfm), GFP_KERNEL); + if (!digest) + goto out; + + if (crypto_shash_init(desc)) + goto out; + + if (crypto_shash_update(desc, p->pkcs7, p->pkcs7len)) + goto out; + + if (crypto_shash_final(desc, digest)) + goto out; + + audit_log_format(ab, audit_format, p->parsed->name, + p->parsed->version.major, p->parsed->version.minor, + p->parsed->version.rev); + audit_log_n_hex(ab, digest, crypto_shash_digestsize(tfm)); + +out: + kfree(digest); + crypto_free_shash(tfm); +} + +/** + * ipe_audit_policy_activation - Audit a policy being made the active policy. + * @p: Supplies a pointer to the policy to audit. + */ +void ipe_audit_policy_activation(const struct ipe_policy *const op, + const struct ipe_policy *const np) +{ + struct audit_buffer *ab; + + ab = audit_log_start(audit_context(), GFP_KERNEL, + AUDIT_IPE_CONFIG_CHANGE); + if (!ab) + return; + + audit_policy(ab, AUDIT_OLD_ACTIVE_POLICY_FMT, op); + audit_log_format(ab, " "); + audit_policy(ab, AUDIT_NEW_ACTIVE_POLICY_FMT, np); + audit_log_format(ab, " auid=%u ses=%u lsm=ipe res=1", + from_kuid(&init_user_ns, audit_get_loginuid(current)), + audit_get_sessionid(current)); + + audit_log_end(ab); +} + +/** + * ipe_audit_policy_load - Audit a policy being loaded into the kernel. + * @p: Supplies a pointer to the policy to audit. + */ +void ipe_audit_policy_load(const struct ipe_policy *const p) +{ + struct audit_buffer *ab; + + ab = audit_log_start(audit_context(), GFP_KERNEL, + AUDIT_IPE_POLICY_LOAD); + if (!ab) + return; + + audit_policy(ab, AUDIT_POLICY_LOAD_FMT, p); + audit_log_format(ab, " auid=%u ses=%u lsm=ipe res=1", + from_kuid(&init_user_ns, audit_get_loginuid(current)), + audit_get_sessionid(current)); + + audit_log_end(ab); +} diff --git a/security/ipe/audit.h b/security/ipe/audit.h new file mode 100644 index 000000000000..0ff5a06808de --- /dev/null +++ b/security/ipe/audit.h @@ -0,0 +1,18 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (C) Microsoft Corporation. All rights reserved. + */ + +#ifndef _IPE_AUDIT_H +#define _IPE_AUDIT_H + +#include "policy.h" + +void ipe_audit_match(const struct ipe_eval_ctx *const ctx, + enum ipe_match match_type, + enum ipe_action_type act, const struct ipe_rule *const r); +void ipe_audit_policy_load(const struct ipe_policy *const p); +void ipe_audit_policy_activation(const struct ipe_policy *const op, + const struct ipe_policy *const np); + +#endif /* _IPE_AUDIT_H */ diff --git a/security/ipe/eval.c b/security/ipe/eval.c index f19a641535c4..2cb43ad92a65 100644 --- a/security/ipe/eval.c +++ b/security/ipe/eval.c @@ -10,13 +10,16 @@ #include <linux/sched.h> #include <linux/rcupdate.h> #include <linux/spinlock.h> +#include <linux/moduleparam.h> #include "ipe.h" #include "eval.h" #include "hooks.h" #include "policy.h" +#include "audit.h" struct ipe_policy __rcu *ipe_active_policy; +bool success_audit; static const struct super_block *pinned_sb; static DEFINE_SPINLOCK(pin_lock); @@ -114,6 +117,7 @@ int ipe_evaluate_event(const struct ipe_eval_ctx *const ctx) int rc = 0; bool match = false; enum ipe_action_type action; + enum ipe_match match_type; struct ipe_policy *pol = NULL; const struct ipe_rule *rule = NULL; const struct ipe_op_table *rules = NULL; @@ -129,6 +133,7 @@ int ipe_evaluate_event(const struct ipe_eval_ctx *const ctx) if (ctx->op == __IPE_OP_INVALID) { action = pol->parsed->global_default_action; + match_type = __IPE_MATCH_GLOBAL; goto eval; } @@ -144,15 +149,21 @@ int ipe_evaluate_event(const struct ipe_eval_ctx *const ctx) break; } - if (match) + if (match) { action = rule->action; - else if (rules->default_action != __IPE_ACTION_INVALID) + match_type = __IPE_MATCH_RULE; + } else if (rules->default_action != __IPE_ACTION_INVALID) { action = rules->default_action; - else + match_type = __IPE_MATCH_TABLE; + } else { action = pol->parsed->global_default_action; + match_type = __IPE_MATCH_GLOBAL; + } rcu_read_unlock(); eval: + ipe_audit_match(ctx, match_type, action, rule); + if (action == __IPE_ACTION_DENY) rc = -EACCES; @@ -176,3 +187,12 @@ void ipe_invalidate_pinned_sb(const struct super_block *mnt_sb) spin_unlock(&pin_lock); } + +/* Set the right module name */ +#ifdef KBUILD_MODNAME +#undef KBUILD_MODNAME +#define KBUILD_MODNAME "ipe" +#endif + +module_param(success_audit, bool, 0400); +MODULE_PARM_DESC(success_audit, "Start IPE with success auditing enabled"); diff --git a/security/ipe/eval.h b/security/ipe/eval.h index 88c625d6af97..8fcdb2ea19f4 100644 --- a/security/ipe/eval.h +++ b/security/ipe/eval.h @@ -13,6 +13,7 @@ #include "policy.h" extern struct ipe_policy __rcu *ipe_active_policy; +extern bool success_audit; struct ipe_eval_ctx { enum ipe_op_type op; @@ -21,6 +22,13 @@ struct ipe_eval_ctx { bool from_init_sb; }; +enum ipe_match { + __IPE_MATCH_RULE = 0, + __IPE_MATCH_TABLE, + __IPE_MATCH_GLOBAL, + __IPE_MATCH_MAX +}; + void build_eval_ctx(struct ipe_eval_ctx *ctx, const struct file *file, enum ipe_op_type op); int ipe_evaluate_event(const struct ipe_eval_ctx *const ctx); void ipe_invalidate_pinned_sb(const struct super_block *mnt_sb); diff --git a/security/ipe/fs.c b/security/ipe/fs.c index 522162af741a..6bd2aa84831b 100644 --- a/security/ipe/fs.c +++ b/security/ipe/fs.c @@ -8,11 +8,65 @@ #include "ipe.h" #include "fs.h" +#include "eval.h" #include "policy.h" +#include "audit.h" static struct dentry *np __ro_after_init; static struct dentry *root __ro_after_init; struct dentry *policy_root __ro_after_init; +static struct dentry *audit_node __ro_after_init; + +/** + * setaudit - Write handler for the securityfs node, "ipe/success_audit" + * @f: Supplies a file structure representing the securityfs node. + * @data: Supplies a buffer passed to the write syscall. + * @len: Supplies the length of @data. + * @offset: unused. + * + * Return: + * * >0 - Success, Length of buffer written + * * <0 - Error + */ +static ssize_t setaudit(struct file *f, const char __user *data, + size_t len, loff_t *offset) +{ + int rc = 0; + bool value; + + if (!file_ns_capable(f, &init_user_ns, CAP_MAC_ADMIN)) + return -EPERM; + + value = READ_ONCE(success_audit); + rc = kstrtobool_from_user(data, len, &value); + if (rc) + return rc; + + WRITE_ONCE(success_audit, value); + + return len; +} + +/** + * getaudit - Read handler for the securityfs node, "ipe/success_audit" + * @f: Supplies a file structure representing the securityfs node. + * @data: Supplies a buffer passed to the read syscall. + * @len: Supplies the length of @data. + * @offset: unused. + * + * Return: + * * >0 - Success, Length of buffer written + * * <0 - Error + */ +static ssize_t getaudit(struct file *f, char __user *data, + size_t len, loff_t *offset) +{ + const char *result; + + result = ((READ_ONCE(success_audit)) ? "1" : "0"); + + return simple_read_from_buffer(data, len, offset, result, 1); +} /** * new_policy - Write handler for the securityfs node, "ipe/new_policy". @@ -46,6 +100,10 @@ static ssize_t new_policy(struct file *f, const char __user *data, } rc = ipe_new_policyfs_node(p); + if (rc) + goto out; + + ipe_audit_policy_load(p); out: if (rc < 0 && !IS_ERR(p)) @@ -58,6 +116,11 @@ static const struct file_operations np_fops = { .write = new_policy, }; +static const struct file_operations audit_fops = { + .write = setaudit, + .read = getaudit, +}; + /** * ipe_init_securityfs - Initialize IPE's securityfs tree at fsinit. * @@ -78,6 +141,13 @@ static int __init ipe_init_securityfs(void) goto err; } + audit_node = securityfs_create_file("success_audit", 0600, root, + NULL, &audit_fops); + if (IS_ERR(audit_node)) { + rc = PTR_ERR(audit_node); + goto err; + } + policy_root = securityfs_create_dir("policies", root); if (IS_ERR(policy_root)) { rc = PTR_ERR(policy_root); @@ -94,6 +164,7 @@ static int __init ipe_init_securityfs(void) err: securityfs_remove(np); securityfs_remove(policy_root); + securityfs_remove(audit_node); securityfs_remove(root); return rc; } diff --git a/security/ipe/policy.c b/security/ipe/policy.c index 3e8e4a06a044..23fa2680d8d7 100644 --- a/security/ipe/policy.c +++ b/security/ipe/policy.c @@ -11,6 +11,7 @@ #include "fs.h" #include "policy.h" #include "policy_parser.h" +#include "audit.h" /* lock for synchronizing writers across ipe policy */ DEFINE_MUTEX(ipe_policy_lock); @@ -119,6 +120,8 @@ struct ipe_policy *ipe_update_policy(struct inode *root, swap(new->policyfs, old->policyfs); + ipe_audit_policy_load(new); + out: return (rc < 0) ? ERR_PTR(rc) : old; err: @@ -204,5 +207,7 @@ int ipe_set_active_pol(const struct ipe_policy *p) rcu_assign_pointer(ipe_active_policy, p); + ipe_audit_policy_activation(ap, p); + return 0; }