| Message ID | 20210805003219.23221-1-hj.tedd.an@gmail.com (mailing list archive) |
|---|---|
| Headers | show |
| Series | Bluetooth: btintel: Refactoring setup routines | expand |
Hi Tedd, > Changes in v7: > - Rebase the patchsets to the tip of the bluetooth-next > 6eefec4a0 ("Bluetooth: Add additional Bluetooth part for Realtek 8852AE") > > - Some basic testing were done with the following Intel devices to verify > the firmware loading and some profiles (LE HID, A2DP, HFP) > WP2_B3 > WP2_B5 > StP > SdP > SfP > WsP > ThP > CcP > TyP > > > This patch set refactors the multiple setup routines for various Intel devices > to a combined single entry. Here are the highlight of the changes: > > 1. Updated hci_alloc_dev() to allocate the hdev object with an extra buffer > for the private data. btintel introduces the btintel_data struct and > store it to the private data in hdev object. > > 2. Added a single entry for setup and shutdown and uses the > HCI_Intel_Read_Version command to identify the device, instead of > relying on the USB VID and PID. The new HCI_Intel_Read_Version command > is used for both legacy ROM, legacy Bootloader and TLV based bootloader. > > Also, btintel_configure_setup() is added to setup the most of hdev > callbacks, unless it is a transport specific functions. > > After identifying the device, it calls the corresponding setup routines. > These routines were copied from btusb to btintel and changes are none or > very minimal. > > 3. Keep the state of bootloader in btintel object. The bootloader state > is agnostic to the transport type, so btintel uses the btintel_data > to keep track of the state in the private data section in hdev. > > Also, added macros to set/clear/test flags to simplify the code. > > 5. Cleaned up the exported functions and make it static as much as possible > if not necessary. > > 6. From the JfP/ThP, the operational firmware support the new TLV based > HCI_Intel_Read_Version command, which confues the usage during the > setup routine. So, the check for firmware variant of those legacy > bootloader sku is added to use the legacy bootloader setup call. > > 7. All of HCI quirks for Intel devices are moved in the setup routines. > There are several HCI quirks for Intel devices and some of them are > for all Intel devices and some of them are for a specific devices. > > The flag for HCI quirks are removed from the .driver_info, and applying > HCI quirks are done in combined setup routine depends on the hw_variant. > > 8. Combined the setting the MSFT extension support in the combined setup > routine now depends on the hw_variant. > > > Tedd Ho-Jeong An (12): > Bluetooth: Add support hdev to allocate private data > Bluetooth: btintel: Add combined setup and shutdown functions > Bluetooth: btintel: Refactoring setup routine for legacy ROM sku > Bluetooth: btintel: Add btintel data struct > Bluetooth: btintel: Fix the first HCI command not work with ROM device > Bluetooth: btintel: Fix the LED is not turning off immediately > Bluetooth: btintel: Add combined set_diag functions > Bluetooth: btintel: Refactoring setup routine for bootloader devices > Bluetooth: btintel: Move hci quirks to setup routine > Bluetooth: btintel: Clean the exported function to static > Bluetooth: btintel: Fix the legacy bootloader returns tlv based > version > Bluetooth: btintel: Combine setting up MSFT extension > > drivers/bluetooth/btintel.c | 1314 ++++++++++++++++++++++++++++-- > drivers/bluetooth/btintel.h | 119 ++- > drivers/bluetooth/btusb.c | 1128 +------------------------ > include/net/bluetooth/hci_core.h | 13 +- > net/bluetooth/hci_core.c | 13 +- > 5 files changed, 1364 insertions(+), 1223 deletions(-) all 12 patches have been applied to bluetooth-next tree. Regards Marcel
From: Tedd Ho-Jeong An <tedd.an@intel.com> Changes in v7: - Rebase the patchsets to the tip of the bluetooth-next 6eefec4a0 ("Bluetooth: Add additional Bluetooth part for Realtek 8852AE") - Some basic testing were done with the following Intel devices to verify the firmware loading and some profiles (LE HID, A2DP, HFP) WP2_B3 WP2_B5 StP SdP SfP WsP ThP CcP TyP This patch set refactors the multiple setup routines for various Intel devices to a combined single entry. Here are the highlight of the changes: 1. Updated hci_alloc_dev() to allocate the hdev object with an extra buffer for the private data. btintel introduces the btintel_data struct and store it to the private data in hdev object. 2. Added a single entry for setup and shutdown and uses the HCI_Intel_Read_Version command to identify the device, instead of relying on the USB VID and PID. The new HCI_Intel_Read_Version command is used for both legacy ROM, legacy Bootloader and TLV based bootloader. Also, btintel_configure_setup() is added to setup the most of hdev callbacks, unless it is a transport specific functions. After identifying the device, it calls the corresponding setup routines. These routines were copied from btusb to btintel and changes are none or very minimal. 3. Keep the state of bootloader in btintel object. The bootloader state is agnostic to the transport type, so btintel uses the btintel_data to keep track of the state in the private data section in hdev. Also, added macros to set/clear/test flags to simplify the code. 5. Cleaned up the exported functions and make it static as much as possible if not necessary. 6. From the JfP/ThP, the operational firmware support the new TLV based HCI_Intel_Read_Version command, which confues the usage during the setup routine. So, the check for firmware variant of those legacy bootloader sku is added to use the legacy bootloader setup call. 7. All of HCI quirks for Intel devices are moved in the setup routines. There are several HCI quirks for Intel devices and some of them are for all Intel devices and some of them are for a specific devices. The flag for HCI quirks are removed from the .driver_info, and applying HCI quirks are done in combined setup routine depends on the hw_variant. 8. Combined the setting the MSFT extension support in the combined setup routine now depends on the hw_variant. Tedd Ho-Jeong An (12): Bluetooth: Add support hdev to allocate private data Bluetooth: btintel: Add combined setup and shutdown functions Bluetooth: btintel: Refactoring setup routine for legacy ROM sku Bluetooth: btintel: Add btintel data struct Bluetooth: btintel: Fix the first HCI command not work with ROM device Bluetooth: btintel: Fix the LED is not turning off immediately Bluetooth: btintel: Add combined set_diag functions Bluetooth: btintel: Refactoring setup routine for bootloader devices Bluetooth: btintel: Move hci quirks to setup routine Bluetooth: btintel: Clean the exported function to static Bluetooth: btintel: Fix the legacy bootloader returns tlv based version Bluetooth: btintel: Combine setting up MSFT extension drivers/bluetooth/btintel.c | 1314 ++++++++++++++++++++++++++++-- drivers/bluetooth/btintel.h | 119 ++- drivers/bluetooth/btusb.c | 1128 +------------------------ include/net/bluetooth/hci_core.h | 13 +- net/bluetooth/hci_core.c | 13 +- 5 files changed, 1364 insertions(+), 1223 deletions(-)