| Message ID | 20241021122246.1569235-1-danstiv404@gmail.com (mailing list archive) |
|---|---|
| Headers | show |
| Series | Bluetooth: btusb: Add quirks for ATS2851 | expand |
Hello: This series was applied to bluetooth/bluetooth-next.git (master) by Luiz Augusto von Dentz <luiz.von.dentz@intel.com>: On Mon, 21 Oct 2024 12:22:43 +0000 you wrote: > The controller based on ATS2851 advertises support for the "LE > Extended Create Connection" command, but it does not actually > implement it. This issue is blocking the pairing process from > beginning. > > To resolve this, add the quirk HCI_QUIRK_BROKEN_EXT_CREATE_CONN. > This will avoid the unsupported command and instead send a regular "LE > Create Connection" command. > > [...] Here is the summary with links: - [1/3] Bluetooth: Add new quirks for ATS2851 https://git.kernel.org/bluetooth/bluetooth-next/c/ff4565bd7117 - [2/3] Bluetooth: Support new quirks for ATS2851 https://git.kernel.org/bluetooth/bluetooth-next/c/90f7f7538d07 - [3/3] Bluetooth: Set quirks for ATS2851 https://git.kernel.org/bluetooth/bluetooth-next/c/017dced0da79 You are awesome, thank you!
The controller based on ATS2851 advertises support for the "LE Extended Create Connection" command, but it does not actually implement it. This issue is blocking the pairing process from beginning. To resolve this, add the quirk HCI_QUIRK_BROKEN_EXT_CREATE_CONN. This will avoid the unsupported command and instead send a regular "LE Create Connection" command. < HCI Command: LE Extended Create Conn.. (0x08|0x0043) plen 26 Filter policy: Accept list is not used (0x00) Own address type: Public (0x00) Peer address type: Random (0x01) Peer address: DD:5E:B9:FE:49:3D (Static) Initiating PHYs: 0x01 Entry 0: LE 1M Scan interval: 60.000 msec (0x0060) Scan window: 60.000 msec (0x0060) Min connection interval: 30.00 msec (0x0018) Max connection interval: 50.00 msec (0x0028) Connection latency: 0 (0x0000) Supervision timeout: 420 msec (0x002a) Min connection length: 0.000 msec (0x0000) Max connection length: 0.000 msec (0x0000) HCI Event: Command Status (0x0f) plen 4 LE Extended Create Connection (0x08|0x0043) ncmd 1 Status: Unknown HCI Command (0x01) This is a resubmission of a patch based on current bluetooth-next/master. Also I noticed the following problem: 1. The connection with the LE device is stable for 10-20 hours, the device is periodically turned off and on, the connection is restored after the device is turned on. 2. At some point after the connection is broken,it is no longer restored, the adapter sends an mtu request, does not receive a response, and connection is closed. @ MGMT Event: Device Connected (0x000b) plen 40 {0x0001} [hci0] 3949.336820 LE Address: E8:42:26:5C:0F:07 (Static) Flags: 0x00000008 Connection Locally Initiated Data length: 27 Name (complete): RFS-KKL002 Flags: 0x06 LE General Discoverable Mode BR/EDR Not Supported Company: Transenergooil AG (450) Data: 4000070f5c2642e8 btmon[11980]: @ RAW Open: btmon (privileged) version 2.22 {0x0002} 3949.336952 btmon[11980]: @ RAW Close: btmon {0x0002} 3949.336962 > HCI Event: LE Meta Event (0x3e) plen 4 #61140 [hci0] 3949.339079 LE Channel Selection Algorithm (0x14) Handle: 1536 Address: E8:42:26:5C:0F:07 (Static) Algorithm: #1 (0x00) < HCI Command: LE Read Remote.. (0x08|0x0016) plen 2 #61141 [hci0] 3949.346390 Handle: 1536 Address: E8:42:26:5C:0F:07 (Static) > HCI Event: Command Status (0x0f) plen 4 #61142 [hci0] 3949.348227 LE Read Remote Used Features (0x08|0x0016) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 12 #61143 [hci0] 3949.414952 LE Read Remote Used Features (0x04) Status: Success (0x00) Handle: 1536 Address: E8:42:26:5C:0F:07 (Static) Features: 0x01 0x00 0x00 0x00 0x00 0x00 0x00 0x00 LE Encryption bluetoothd[422]: < ACL Data TX:... flags 0x00 dlen 7 #61144 [hci0] 3949.415720 ATT: Exchange MTU Request (0x02) len 2 Client RX MTU: 517 bluetoothd[422]: @ MGMT Command:.. (0x0014) plen 7 {0x0001} [hci0] 3948.495765 LE Address: E8:42:26:5C:0F:07 (Static) < HCI Command: Disconnect (0x01|0x0006) plen 3 #61115 [hci0] 3948.495995 Handle: 1536 Address: E8:42:26:5C:0F:07 (Static) Reason: Remote User Terminated Connection (0x13) > HCI Event: Command Status (0x0f) plen 4 #61116 [hci0] 3948.497701 Disconnect (0x01|0x0006) ncmd 1 Status: Success (0x00) The important thing is that the response to mtu request stops coming from other devices (tested with two le devices). Therefore this is not a problem with end devices. Doing power off / power on from bluetoothctl temporarily solves this problem for a few hours. Danil Pylaev (3): Bluetooth: Add new quirks for ATS2851 Bluetooth: Support new quirks for ATS2851 Bluetooth: Set quirks for ATS2851 drivers/bluetooth/btusb.c | 2 ++ include/net/bluetooth/hci.h | 14 ++++++++++++++ include/net/bluetooth/hci_core.h | 10 ++++++---- net/bluetooth/hci_event.c | 7 +++++++ net/bluetooth/hci_sync.c | 9 ++++++++- 5 files changed, 37 insertions(+), 5 deletions(-)