diff mbox series

[v3,2/2] dt-bindings: net: bluetooth: Add device tree bindings for QTI chip WCN3991

Message ID 1580726441-1100-2-git-send-email-gubbaven@codeaurora.org (mailing list archive)
State Accepted
Delegated to: Marcel Holtmann
Headers show
Series [v3,1/2] Bluetooth: hci_qca: Enable clocks required for BT SOC | expand

Commit Message

Venkata Lakshmi Narayana Gubba Feb. 3, 2020, 10:40 a.m. UTC 
Add compatible string for the Qualcomm WCN3991 Bluetooth controller

Signed-off-by: Venkata Lakshmi Narayana Gubba <gubbaven@codeaurora.org>
---
v3:
  *Updated clocks with <&rpmhcc RPMH_RF_CLK2>  
---
 Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt | 3 +++
 1 file changed, 3 insertions(+)

Comments

Marcel Holtmann Feb. 3, 2020, 2:45 p.m. UTC | #1 
Hi Venkata,

> Add compatible string for the Qualcomm WCN3991 Bluetooth controller
> 
> Signed-off-by: Venkata Lakshmi Narayana Gubba <gubbaven@codeaurora.org>
> ---
> v3:
>  *Updated clocks with <&rpmhcc RPMH_RF_CLK2>  
> ---
> Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt | 3 +++
> 1 file changed, 3 insertions(+)

patch has been applied to bluetooth-next tree.

Regards

Marcel
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt b/Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt
index 68b67d9..beca646 100644
--- a/Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt
+++ b/Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt
@@ -11,6 +11,7 @@  Required properties:
  - compatible: should contain one of the following:
    * "qcom,qca6174-bt"
    * "qcom,wcn3990-bt"
+   * "qcom,wcn3991-bt"
    * "qcom,wcn3998-bt"
 
 Optional properties for compatible string qcom,qca6174-bt:
@@ -30,6 +31,7 @@  Optional properties for compatible string qcom,wcn399x-bt:
 
  - max-speed: see Documentation/devicetree/bindings/serial/slave-device.txt
  - firmware-name: specify the name of nvm firmware to load
+ - clocks: clock provided to the controller
 
 Examples:
 
@@ -56,5 +58,6 @@  serial@898000 {
 		vddch0-supply = <&vreg_l25a_3p3>;
 		max-speed = <3200000>;
 		firmware-name = "crnv21.bin";
+		clocks = <&rpmhcc RPMH_RF_CLK2>;
 	};
 };