diff mbox series

[v1] Bluetooth: hci_qca: Fix qca6390 enable failure after warm reboot

Message ID 1590719360-28257-1-git-send-email-zijuhu@codeaurora.org (mailing list archive)
State Superseded
Delegated to: Marcel Holtmann
Headers show
Series [v1] Bluetooth: hci_qca: Fix qca6390 enable failure after warm reboot | expand

Commit Message

Zijun Hu May 29, 2020, 2:29 a.m. UTC
Warm reboot can not reset controller qca6390 due to
lack of controllable power supply, so causes firmware
download failure during enable.

Fixed by sending VSC EDL_SOC_RESET to reset qca6390
within added device shutdown implementation.

Signed-off-by: Zijun Hu <zijuhu@codeaurora.org>
Tested-by: Zijun Hu <zijuhu@codeaurora.org>
---
 drivers/bluetooth/hci_qca.c | 33 +++++++++++++++++++++++++++++++++
 1 file changed, 33 insertions(+)

Comments

Marcel Holtmann May 29, 2020, 11:45 a.m. UTC | #1
Hi Zijun,

> On May 29, 2020, at 04:29, Zijun Hu <zijuhu@codeaurora.org> wrote:
> 
> Warm reboot can not reset controller qca6390 due to
> lack of controllable power supply, so causes firmware
> download failure during enable.
> 
> Fixed by sending VSC EDL_SOC_RESET to reset qca6390
> within added device shutdown implementation.
> 
> Signed-off-by: Zijun Hu <zijuhu@codeaurora.org>
> Tested-by: Zijun Hu <zijuhu@codeaurora.org>
> ---
> drivers/bluetooth/hci_qca.c | 33 +++++++++++++++++++++++++++++++++
> 1 file changed, 33 insertions(+)

patch does not apply to bluetooth-next tree, please rebase.

Regards

Marcel
Zijun Hu May 29, 2020, 1:58 p.m. UTC | #2
On 5/29/2020 7:45 PM, Marcel Holtmann wrote:
> Hi Zijun,
> 
>> On May 29, 2020, at 04:29, Zijun Hu <zijuhu@codeaurora.org> wrote:
>>
>> Warm reboot can not reset controller qca6390 due to
>> lack of controllable power supply, so causes firmware
>> download failure during enable.
>>
>> Fixed by sending VSC EDL_SOC_RESET to reset qca6390
>> within added device shutdown implementation.
>>
>> Signed-off-by: Zijun Hu <zijuhu@codeaurora.org>
>> Tested-by: Zijun Hu <zijuhu@codeaurora.org>
>> ---
>> drivers/bluetooth/hci_qca.c | 33 +++++++++++++++++++++++++++++++++
>> 1 file changed, 33 insertions(+)
> 
> patch does not apply to bluetooth-next tree, please rebase.
> 
rebased at v2
> Regards
> 
> Marcel
>
diff mbox series

Patch

diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
index e4a6823..f525656 100644
--- a/drivers/bluetooth/hci_qca.c
+++ b/drivers/bluetooth/hci_qca.c
@@ -1975,6 +1975,38 @@  static void qca_serdev_remove(struct serdev_device *serdev)
 	hci_uart_unregister_device(&qcadev->serdev_hu);
 }
 
+static void qca_serdev_shutdown(struct device *dev)
+{
+	int ret;
+	int timeout = msecs_to_jiffies(CMD_TRANS_TIMEOUT_MS);
+	struct serdev_device *serdev = to_serdev_device(dev);
+	struct qca_serdev *qcadev = serdev_device_get_drvdata(serdev);
+	const u8 ibs_wake_cmd[] = { 0xFD };
+	const u8 edl_reset_soc_cmd[] = { 0x01, 0x00, 0xFC, 0x01, 0x05 };
+
+	if (qcadev->btsoc_type == QCA_QCA6390) {
+		serdev_device_write_flush(serdev);
+		ret = serdev_device_write_buf(serdev, ibs_wake_cmd,
+					      sizeof(ibs_wake_cmd));
+		if (ret < 0) {
+			BT_ERR("QCA send IBS_WAKE_IND error: %d", ret);
+			return;
+		}
+		serdev_device_wait_until_sent(serdev, timeout);
+		usleep_range(8000, 10000);
+
+		serdev_device_write_flush(serdev);
+		ret = serdev_device_write_buf(serdev, edl_reset_soc_cmd,
+					      sizeof(edl_reset_soc_cmd));
+		if (ret < 0) {
+			BT_ERR("QCA send EDL_RESET_REQ error: %d", ret);
+			return;
+		}
+		serdev_device_wait_until_sent(serdev, timeout);
+		usleep_range(8000, 10000);
+	}
+}
+
 static int __maybe_unused qca_suspend(struct device *dev)
 {
 	struct hci_dev *hdev = container_of(dev, struct hci_dev, dev);
@@ -2100,6 +2132,7 @@  static struct serdev_device_driver qca_serdev_driver = {
 		.name = "hci_uart_qca",
 		.of_match_table = of_match_ptr(qca_bluetooth_of_match),
 		.acpi_match_table = ACPI_PTR(qca_bluetooth_acpi_match),
+		.shutdown = qca_serdev_shutdown,
 		.pm = &qca_pm_ops,
 	},
 };