| Message ID | 1650898889-12470-1-git-send-email-quic_zijuhu@quicinc.com (mailing list archive) |
|---|---|
| State | Accepted |
| Commit | d42038f8db905678c29183ef331578fcec01ffcc |
| Headers | show |
| Series | [v3] Bluetooth: btusb: add support for Qualcomm WCN785x | expand |
| Context | Check | Description |
|---|---|---|
| tedd_an/pre-ci_am | success | Success |
| tedd_an/checkpatch | success | Checkpatch PASS |
| tedd_an/gitlint | success | Gitlint PASS |
| tedd_an/subjectprefix | success | PASS |
| tedd_an/buildkernel | success | Build Kernel PASS |
| tedd_an/buildkernel32 | success | Build Kernel32 PASS |
| tedd_an/incremental_build | success | Pass |
| tedd_an/testrunnersetup | success | Test Runner Setup PASS |
| tedd_an/testrunnerl2cap-tester | success | Total: 40, Passed: 40 (100.0%), Failed: 0, Not Run: 0 |
| tedd_an/testrunnerbnep-tester | success | Total: 1, Passed: 1 (100.0%), Failed: 0, Not Run: 0 |
| tedd_an/testrunnermgmt-tester | success | Total: 493, Passed: 493 (100.0%), Failed: 0, Not Run: 0 |
| tedd_an/testrunnerrfcomm-tester | success | Total: 10, Passed: 10 (100.0%), Failed: 0, Not Run: 0 |
| tedd_an/testrunnersco-tester | success | Total: 12, Passed: 12 (100.0%), Failed: 0, Not Run: 0 |
| tedd_an/testrunnersmp-tester | success | Total: 8, Passed: 8 (100.0%), Failed: 0, Not Run: 0 |
| tedd_an/testrunneruserchan-tester | success | Total: 4, Passed: 4 (100.0%), Failed: 0, Not Run: 0 |
This is automated email and please do not reply to this email! Dear submitter, Thank you for submitting the patches to the linux bluetooth mailing list. This is a CI test results with your patch series: PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=635371 ---Test result--- Test Summary: CheckPatch PASS 1.76 seconds GitLint PASS 1.07 seconds SubjectPrefix PASS 0.87 seconds BuildKernel PASS 36.74 seconds BuildKernel32 PASS 32.95 seconds Incremental Build with patchesPASS 44.00 seconds TestRunner: Setup PASS 553.75 seconds TestRunner: l2cap-tester PASS 19.28 seconds TestRunner: bnep-tester PASS 6.95 seconds TestRunner: mgmt-tester PASS 113.56 seconds TestRunner: rfcomm-tester PASS 10.91 seconds TestRunner: sco-tester PASS 10.52 seconds TestRunner: smp-tester PASS 10.56 seconds TestRunner: userchan-tester PASS 7.28 seconds --- Regards, Linux Bluetooth
Hello: This patch was applied to bluetooth/bluetooth-next.git (master) by Marcel Holtmann <marcel@holtmann.org>: On Mon, 25 Apr 2022 23:01:29 +0800 you wrote: > Qualcomm WCN785x has PID/VID 0cf3/e700 as shown by > /sys/kernel/debug/usb/devices: > > T: Bus=02 Lev=02 Prnt=02 Port=01 Cnt=02 Dev#= 8 Spd=12 MxCh= 0 > D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 > P: Vendor=0cf3 ProdID=e700 Rev= 0.01 > C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA > I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms > E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms > E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms > I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms > E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms > I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms > E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms > I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms > E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms > I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms > E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms > I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms > E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms > I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms > E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms > I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms > E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms > I: If#= 1 Alt= 7 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > E: Ad=83(I) Atr=01(Isoc) MxPS= 65 Ivl=1ms > E: Ad=03(O) Atr=01(Isoc) MxPS= 65 Ivl=1ms > > [...] Here is the summary with links: - [v3] Bluetooth: btusb: add support for Qualcomm WCN785x https://git.kernel.org/bluetooth/bluetooth-next/c/d42038f8db90 You are awesome, thank you!
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index 06a854a2507e..e6e28d3d1683 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -317,6 +317,11 @@ static const struct usb_device_id blacklist_table[] = { BTUSB_WIDEBAND_SPEECH | BTUSB_VALID_LE_STATES }, + /* QCA WCN785x chipset */ + { USB_DEVICE(0x0cf3, 0xe700), .driver_info = BTUSB_QCA_WCN6855 | + BTUSB_WIDEBAND_SPEECH | + BTUSB_VALID_LE_STATES }, + /* Broadcom BCM2035 */ { USB_DEVICE(0x0a5c, 0x2009), .driver_info = BTUSB_BCM92035 }, { USB_DEVICE(0x0a5c, 0x200a), .driver_info = BTUSB_WRONG_SCO_MTU }, @@ -3037,6 +3042,7 @@ static const struct qca_device_info qca_devices_table[] = { { 0x00130100, 40, 4, 16 }, /* WCN6855 1.0 */ { 0x00130200, 40, 4, 16 }, /* WCN6855 2.0 */ { 0x00130201, 40, 4, 16 }, /* WCN6855 2.1 */ + { 0x00190200, 40, 4, 16 }, /* WCN785x 2.0 */ }; static int btusb_qca_send_vendor_req(struct usb_device *udev, u8 request, @@ -3327,11 +3333,11 @@ static int btusb_setup_qca(struct hci_dev *hdev) if (err < 0) return err; - /* WCN6855 2.1 will reset to apply firmware downloaded here, so + /* WCN6855 2.1 and later will reset to apply firmware downloaded here, so * wait ~100ms for reset Done then go ahead, otherwise, it maybe * cause potential enable failure. */ - if (info->rom_version == 0x00130201) + if (info->rom_version >= 0x00130201) msleep(QCA_BT_RESET_WAIT_MS); }
Qualcomm WCN785x has PID/VID 0cf3/e700 as shown by /sys/kernel/debug/usb/devices: T: Bus=02 Lev=02 Prnt=02 Port=01 Cnt=02 Dev#= 8 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0cf3 ProdID=e700 Rev= 0.01 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms I: If#= 1 Alt= 7 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 65 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 65 Ivl=1ms Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com> --- drivers/bluetooth/btusb.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-)