| Message ID | 20200407055837.3508017-3-alistair@alistair23.me (mailing list archive) |
|---|---|
| State | Superseded |
| Delegated to: | Marcel Holtmann |
| Headers | show |
| Series | [v2,1/3] dt-bindings: net: bluetooth: Add rtl8723bs-bluetooth | expand |
On Mon, Apr 6, 2020 at 10:58 PM Alistair Francis <alistair@alistair23.me> wrote: > > The sopine board has an optional RTL8723BS WiFi + BT module that can be > connected to UART1. Add this to the device tree so that it will work > for users if connected. It's optional, so patch should have 'DO-NOT-MERGE' tag and appropriate change should go into dt overlay. > Signed-off-by: Alistair Francis <alistair@alistair23.me> > --- > .../allwinner/sun50i-a64-sopine-baseboard.dts | 23 +++++++++++++++++++ > 1 file changed, 23 insertions(+) > > diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts > index 2f6ea9f3f6a2..f4be1bc56b07 100644 > --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts > +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts > @@ -103,6 +103,16 @@ ext_rgmii_phy: ethernet-phy@1 { > }; > }; > > +&mmc1 { > + pinctrl-names = "default"; > + pinctrl-0 = <&mmc1_pins>; > + vmmc-supply = <®_dldo4>; > + vqmmc-supply = <®_eldo1>; > + non-removable; > + bus-width = <4>; > + status = "okay"; > +}; > + > &mmc2 { > pinctrl-names = "default"; > pinctrl-0 = <&mmc2_pins>; > @@ -174,6 +184,19 @@ &uart0 { > status = "okay"; > }; > > +&uart1 { > + pinctrl-names = "default"; > + pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>; > + uart-has-rtscts = <1>; > + status = "okay"; > + > + bluetooth { > + compatible = "realtek,rtl8723bs-bt"; > + device-wake-gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* PL5 */ > + host-wake-gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */ > + }; > +}; > + > /* On Pi-2 connector */ > &uart2 { > pinctrl-names = "default"; > -- > 2.25.1 >
On Mon, Apr 6, 2020 at 11:53 PM Vasily Khoruzhick <anarsoul@gmail.com> wrote: > > On Mon, Apr 6, 2020 at 10:58 PM Alistair Francis <alistair@alistair23.me> wrote: > > > > The sopine board has an optional RTL8723BS WiFi + BT module that can be > > connected to UART1. Add this to the device tree so that it will work > > for users if connected. > > It's optional, so patch should have 'DO-NOT-MERGE' tag and appropriate > change should go into dt overlay. I was hoping to enable WiFi/Bluetooth by default, even though it's an optional add-on for the board. Alistair > > > Signed-off-by: Alistair Francis <alistair@alistair23.me> > > --- > > .../allwinner/sun50i-a64-sopine-baseboard.dts | 23 +++++++++++++++++++ > > 1 file changed, 23 insertions(+) > > > > diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts > > index 2f6ea9f3f6a2..f4be1bc56b07 100644 > > --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts > > +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts > > @@ -103,6 +103,16 @@ ext_rgmii_phy: ethernet-phy@1 { > > }; > > }; > > > > +&mmc1 { > > + pinctrl-names = "default"; > > + pinctrl-0 = <&mmc1_pins>; > > + vmmc-supply = <®_dldo4>; > > + vqmmc-supply = <®_eldo1>; > > + non-removable; > > + bus-width = <4>; > > + status = "okay"; > > +}; > > + > > &mmc2 { > > pinctrl-names = "default"; > > pinctrl-0 = <&mmc2_pins>; > > @@ -174,6 +184,19 @@ &uart0 { > > status = "okay"; > > }; > > > > +&uart1 { > > + pinctrl-names = "default"; > > + pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>; > > + uart-has-rtscts = <1>; > > + status = "okay"; > > + > > + bluetooth { > > + compatible = "realtek,rtl8723bs-bt"; > > + device-wake-gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* PL5 */ > > + host-wake-gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */ > > + }; > > +}; > > + > > /* On Pi-2 connector */ > > &uart2 { > > pinctrl-names = "default"; > > -- > > 2.25.1 > >
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts index 2f6ea9f3f6a2..f4be1bc56b07 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts @@ -103,6 +103,16 @@ ext_rgmii_phy: ethernet-phy@1 { }; }; +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; + vmmc-supply = <®_dldo4>; + vqmmc-supply = <®_eldo1>; + non-removable; + bus-width = <4>; + status = "okay"; +}; + &mmc2 { pinctrl-names = "default"; pinctrl-0 = <&mmc2_pins>; @@ -174,6 +184,19 @@ &uart0 { status = "okay"; }; +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>; + uart-has-rtscts = <1>; + status = "okay"; + + bluetooth { + compatible = "realtek,rtl8723bs-bt"; + device-wake-gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* PL5 */ + host-wake-gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */ + }; +}; + /* On Pi-2 connector */ &uart2 { pinctrl-names = "default";
The sopine board has an optional RTL8723BS WiFi + BT module that can be connected to UART1. Add this to the device tree so that it will work for users if connected. Signed-off-by: Alistair Francis <alistair@alistair23.me> --- .../allwinner/sun50i-a64-sopine-baseboard.dts | 23 +++++++++++++++++++ 1 file changed, 23 insertions(+)