diff mbox series

[v2,1/2] Bluetooth: btusb: define HCI packet sizes of USB Alts

Message ID 20200909174129.v2.1.I56de28ec171134cb9f97062e2c304a72822ca38b@changeid (mailing list archive)
State New, archived
Headers show
Series To support the HFP WBS, a chip vendor may choose a particular | expand

Commit Message

Joseph Hwang Sept. 9, 2020, 9:42 a.m. UTC 
It is desirable to define the HCI packet payload sizes of
USB alternate settings so that they can be exposed to user
space.

Reviewed-by: Alain Michaud <alainm@chromium.org>
Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org>
Signed-off-by: Joseph Hwang <josephsih@chromium.org>
---

Changes in v2:
- 1/2: Used sco_mtu instead of a new sco_pkt_len member in hdev.
- 1/2: Do not overwrite hdev->sco_mtu in hci_cc_read_buffer_size
  if it has been set in the USB interface.
- 2/2: Used BT_SNDMTU/BT_RCVMTU instead of creating a new opt name.
- 2/2: Used the existing conn->mtu instead of creating a new member
       in struct sco_pinfo.
- 2/2: Noted that the old SCO_OPTIONS in sco_sock_getsockopt_old()
       would just work as it uses sco_pi(sk)->conn->mtu.

 drivers/bluetooth/btusb.c | 43 +++++++++++++++++++++++++++++----------
 net/bluetooth/hci_event.c |  7 ++++++-
 2 files changed, 38 insertions(+), 12 deletions(-)

Comments

Pali Rohár Sept. 9, 2020, 11:06 a.m. UTC | #1 
On Wednesday 09 September 2020 17:42:01 Joseph Hwang wrote:
> It is desirable to define the HCI packet payload sizes of
> USB alternate settings so that they can be exposed to user
> space.
> 
> Reviewed-by: Alain Michaud <alainm@chromium.org>
> Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org>
> Signed-off-by: Joseph Hwang <josephsih@chromium.org>
> ---
> 
> Changes in v2:
> - 1/2: Used sco_mtu instead of a new sco_pkt_len member in hdev.
> - 1/2: Do not overwrite hdev->sco_mtu in hci_cc_read_buffer_size
>   if it has been set in the USB interface.
> - 2/2: Used BT_SNDMTU/BT_RCVMTU instead of creating a new opt name.
> - 2/2: Used the existing conn->mtu instead of creating a new member
>        in struct sco_pinfo.
> - 2/2: Noted that the old SCO_OPTIONS in sco_sock_getsockopt_old()
>        would just work as it uses sco_pi(sk)->conn->mtu.
> 
>  drivers/bluetooth/btusb.c | 43 +++++++++++++++++++++++++++++----------
>  net/bluetooth/hci_event.c |  7 ++++++-
>  2 files changed, 38 insertions(+), 12 deletions(-)
> 
> diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
> index fe80588c7bd3a8..a710233382afff 100644
> --- a/drivers/bluetooth/btusb.c
> +++ b/drivers/bluetooth/btusb.c
> @@ -459,6 +459,22 @@ static const struct dmi_system_id btusb_needs_reset_resume_table[] = {
>  #define BTUSB_WAKEUP_DISABLE	14
>  #define BTUSB_USE_ALT1_FOR_WBS	15
>  
> +/* Per core spec 5, vol 4, part B, table 2.1,
> + * list the hci packet payload sizes for various ALT settings.
> + * This is used to set the packet length for the wideband speech.
> + * If a controller does not probe its usb alt setting, the default
> + * value will be 0. Any clients at upper layers should interpret it
> + * as a default value and set a proper packet length accordingly.
> + *
> + * To calculate the HCI packet payload length:
> + *   for alternate settings 1 - 5:
> + *     hci_packet_size = suggested_max_packet_size * 3 (packets) -
> + *                       3 (HCI header octets)
> + *   for alternate setting 6:
> + *     hci_packet_size = suggested_max_packet_size - 3 (HCI header octets)

Hello! What is value for 'suggested_max_packet_size' used in above
calculation algorithm?

> + */
> +static const int hci_packet_size_usb_alt[] = { 0, 24, 48, 72, 96, 144, 60 };
> +
>  struct btusb_data {
>  	struct hci_dev       *hdev;
>  	struct usb_device    *udev;
> @@ -3959,6 +3975,15 @@ static int btusb_probe(struct usb_interface *intf,
>  	hdev->notify = btusb_notify;
>  	hdev->prevent_wake = btusb_prevent_wake;
>  
> +	if (id->driver_info & BTUSB_AMP) {
> +		/* AMP controllers do not support SCO packets */
> +		data->isoc = NULL;
> +	} else {
> +		/* Interface orders are hardcoded in the specification */
> +		data->isoc = usb_ifnum_to_if(data->udev, ifnum_base + 1);
> +		data->isoc_ifnum = ifnum_base + 1;
> +	}
> +
>  #ifdef CONFIG_PM
>  	err = btusb_config_oob_wake(hdev);
>  	if (err)
> @@ -4022,6 +4047,10 @@ static int btusb_probe(struct usb_interface *intf,
>  		hdev->set_diag = btintel_set_diag;
>  		hdev->set_bdaddr = btintel_set_bdaddr;
>  		hdev->cmd_timeout = btusb_intel_cmd_timeout;
> +
> +		if (btusb_find_altsetting(data, 6))
> +			hdev->sco_mtu = hci_packet_size_usb_alt[6];
> +
>  		set_bit(HCI_QUIRK_STRICT_DUPLICATE_FILTER, &hdev->quirks);
>  		set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &hdev->quirks);
>  		set_bit(HCI_QUIRK_NON_PERSISTENT_DIAG, &hdev->quirks);
> @@ -4063,15 +4092,6 @@ static int btusb_probe(struct usb_interface *intf,
>  		btusb_check_needs_reset_resume(intf);
>  	}
>  
> -	if (id->driver_info & BTUSB_AMP) {
> -		/* AMP controllers do not support SCO packets */
> -		data->isoc = NULL;
> -	} else {
> -		/* Interface orders are hardcoded in the specification */
> -		data->isoc = usb_ifnum_to_if(data->udev, ifnum_base + 1);
> -		data->isoc_ifnum = ifnum_base + 1;
> -	}
> -
>  	if (IS_ENABLED(CONFIG_BT_HCIBTUSB_RTL) &&
>  	    (id->driver_info & BTUSB_REALTEK)) {
>  		hdev->setup = btrtl_setup_realtek;
> @@ -4083,9 +4103,10 @@ static int btusb_probe(struct usb_interface *intf,
>  		 * (DEVICE_REMOTE_WAKEUP)
>  		 */
>  		set_bit(BTUSB_WAKEUP_DISABLE, &data->flags);
> -		if (btusb_find_altsetting(data, 1))
> +		if (btusb_find_altsetting(data, 1)) {
>  			set_bit(BTUSB_USE_ALT1_FOR_WBS, &data->flags);
> -		else
> +			hdev->sco_mtu = hci_packet_size_usb_alt[1];
> +		} else
>  			bt_dev_err(hdev, "Device does not support ALT setting 1");
>  	}
>  
> diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c
> index 33d8458fdd4adc..b3e9247fdbcfa1 100644
> --- a/net/bluetooth/hci_event.c
> +++ b/net/bluetooth/hci_event.c
> @@ -730,7 +730,12 @@ static void hci_cc_read_buffer_size(struct hci_dev *hdev, struct sk_buff *skb)
>  		return;
>  
>  	hdev->acl_mtu  = __le16_to_cpu(rp->acl_mtu);
> -	hdev->sco_mtu  = rp->sco_mtu;
> +	/* Set sco_mtu only when not yet.
> +	 * The sco_mtu would be set in btusb.c
> +	 * if the host controller interface is USB.
> +	 */
> +	if (hdev->sco_mtu == 0)
> +		hdev->sco_mtu  = rp->sco_mtu;

Should not hdev->sco_mtu contains minimum from the rp->sco_mtu and your
calculated value defined in hci_packet_size_usb_alt[i]?

Socket MTU cannot be bigger then value rp->sco_mtu, right?

>  	hdev->acl_pkts = __le16_to_cpu(rp->acl_max_pkt);
>  	hdev->sco_pkts = __le16_to_cpu(rp->sco_max_pkt);
>  
> -- 
> 2.28.0.526.ge36021eeef-goog
>
diff mbox series

Patch

diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index fe80588c7bd3a8..a710233382afff 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -459,6 +459,22 @@  static const struct dmi_system_id btusb_needs_reset_resume_table[] = {
 #define BTUSB_WAKEUP_DISABLE	14
 #define BTUSB_USE_ALT1_FOR_WBS	15
 
+/* Per core spec 5, vol 4, part B, table 2.1,
+ * list the hci packet payload sizes for various ALT settings.
+ * This is used to set the packet length for the wideband speech.
+ * If a controller does not probe its usb alt setting, the default
+ * value will be 0. Any clients at upper layers should interpret it
+ * as a default value and set a proper packet length accordingly.
+ *
+ * To calculate the HCI packet payload length:
+ *   for alternate settings 1 - 5:
+ *     hci_packet_size = suggested_max_packet_size * 3 (packets) -
+ *                       3 (HCI header octets)
+ *   for alternate setting 6:
+ *     hci_packet_size = suggested_max_packet_size - 3 (HCI header octets)
+ */
+static const int hci_packet_size_usb_alt[] = { 0, 24, 48, 72, 96, 144, 60 };
+
 struct btusb_data {
 	struct hci_dev       *hdev;
 	struct usb_device    *udev;
@@ -3959,6 +3975,15 @@  static int btusb_probe(struct usb_interface *intf,
 	hdev->notify = btusb_notify;
 	hdev->prevent_wake = btusb_prevent_wake;
 
+	if (id->driver_info & BTUSB_AMP) {
+		/* AMP controllers do not support SCO packets */
+		data->isoc = NULL;
+	} else {
+		/* Interface orders are hardcoded in the specification */
+		data->isoc = usb_ifnum_to_if(data->udev, ifnum_base + 1);
+		data->isoc_ifnum = ifnum_base + 1;
+	}
+
 #ifdef CONFIG_PM
 	err = btusb_config_oob_wake(hdev);
 	if (err)
@@ -4022,6 +4047,10 @@  static int btusb_probe(struct usb_interface *intf,
 		hdev->set_diag = btintel_set_diag;
 		hdev->set_bdaddr = btintel_set_bdaddr;
 		hdev->cmd_timeout = btusb_intel_cmd_timeout;
+
+		if (btusb_find_altsetting(data, 6))
+			hdev->sco_mtu = hci_packet_size_usb_alt[6];
+
 		set_bit(HCI_QUIRK_STRICT_DUPLICATE_FILTER, &hdev->quirks);
 		set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &hdev->quirks);
 		set_bit(HCI_QUIRK_NON_PERSISTENT_DIAG, &hdev->quirks);
@@ -4063,15 +4092,6 @@  static int btusb_probe(struct usb_interface *intf,
 		btusb_check_needs_reset_resume(intf);
 	}
 
-	if (id->driver_info & BTUSB_AMP) {
-		/* AMP controllers do not support SCO packets */
-		data->isoc = NULL;
-	} else {
-		/* Interface orders are hardcoded in the specification */
-		data->isoc = usb_ifnum_to_if(data->udev, ifnum_base + 1);
-		data->isoc_ifnum = ifnum_base + 1;
-	}
-
 	if (IS_ENABLED(CONFIG_BT_HCIBTUSB_RTL) &&
 	    (id->driver_info & BTUSB_REALTEK)) {
 		hdev->setup = btrtl_setup_realtek;
@@ -4083,9 +4103,10 @@  static int btusb_probe(struct usb_interface *intf,
 		 * (DEVICE_REMOTE_WAKEUP)
 		 */
 		set_bit(BTUSB_WAKEUP_DISABLE, &data->flags);
-		if (btusb_find_altsetting(data, 1))
+		if (btusb_find_altsetting(data, 1)) {
 			set_bit(BTUSB_USE_ALT1_FOR_WBS, &data->flags);
-		else
+			hdev->sco_mtu = hci_packet_size_usb_alt[1];
+		} else
 			bt_dev_err(hdev, "Device does not support ALT setting 1");
 	}
 
diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c
index 33d8458fdd4adc..b3e9247fdbcfa1 100644
--- a/net/bluetooth/hci_event.c
+++ b/net/bluetooth/hci_event.c
@@ -730,7 +730,12 @@  static void hci_cc_read_buffer_size(struct hci_dev *hdev, struct sk_buff *skb)
 		return;
 
 	hdev->acl_mtu  = __le16_to_cpu(rp->acl_mtu);
-	hdev->sco_mtu  = rp->sco_mtu;
+	/* Set sco_mtu only when not yet.
+	 * The sco_mtu would be set in btusb.c
+	 * if the host controller interface is USB.
+	 */
+	if (hdev->sco_mtu == 0)
+		hdev->sco_mtu  = rp->sco_mtu;
 	hdev->acl_pkts = __le16_to_cpu(rp->acl_max_pkt);
 	hdev->sco_pkts = __le16_to_cpu(rp->sco_max_pkt);