| Message ID | 20201110033837.19373-1-max.chou@realtek.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Bluetooth: btusb: btrtl: Add support for RTL8852A | expand |
This is automated email and please do not reply to this email!
Dear submitter,
Thank you for submitting the patches to the linux bluetooth mailing list.
This is a CI test results with your patch series:
PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=380837
---Test result---
##############################
Test: CheckPatch - FAIL
Output:
workflow: Add workflow files for ci
WARNING: added, moved or deleted file(s), does MAINTAINERS need updating?
#18:
new file mode 100644
ERROR: Missing Signed-off-by: line(s)
total: 1 errors, 1 warnings, 49 lines checked
NOTE: For some of the reported defects, checkpatch may be able to
mechanically convert to the typical style using --fix or --fix-inplace.
"[PATCH] workflow: Add workflow files for ci" has style problems, please review.
NOTE: If any of the errors are false positives, please report
them to the maintainer, see CHECKPATCH in MAINTAINERS.
##############################
Test: CheckGitLint - PASS
##############################
Test: CheckBuildK - PASS
---
Regards,
Linux Bluetooth
Hi Max, > Add the support for RTL8852A BT controller on USB interface. > The necessary firmware will be submitted to linux-firmware project. > > The device info from /sys/kernel/debug/usb/devices as below. > > T: Bus=02 Lev=02 Prnt=02 Port=05 Cnt=01 Dev#= 10 Spd=12 MxCh= 0 > D: Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 > P: Vendor=0bda ProdID=c852 Rev= 0.00 > S: Manufacturer=Realtek > S: Product=Bluetooth Radio > S: SerialNumber=00e04c000001 > C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA > I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms > E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms > E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms > I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms > E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms > I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms > E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms > I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms > E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms > I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms > E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms > I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms > E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms > I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms > E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms > > Signed-off-by: Max Chou <max.chou@realtek.com> > --- > drivers/bluetooth/btrtl.c | 12 ++++++++++++ > drivers/bluetooth/btusb.c | 4 ++++ > 2 files changed, 16 insertions(+) patch has been applied to bluetooth-next tree. Regards Marcel
diff --git a/drivers/bluetooth/btrtl.c b/drivers/bluetooth/btrtl.c index 0ac0f8874ef7..e47736a12f77 100644 --- a/drivers/bluetooth/btrtl.c +++ b/drivers/bluetooth/btrtl.c @@ -23,6 +23,7 @@ #define RTL_ROM_LMP_8821A 0x8821 #define RTL_ROM_LMP_8761A 0x8761 #define RTL_ROM_LMP_8822B 0x8822 +#define RTL_ROM_LMP_8852A 0x8852 #define RTL_CONFIG_MAGIC 0x8723ab55 #define IC_MATCH_FL_LMPSUBV (1 << 0) @@ -143,6 +144,13 @@ static const struct id_table ic_id_table[] = { .has_rom_version = true, .fw_name = "rtl_bt/rtl8822b_fw.bin", .cfg_name = "rtl_bt/rtl8822b_config" }, + + /* 8852A */ + { IC_INFO(RTL_ROM_LMP_8852A, 0xa, 0xb, HCI_USB), + .config_needed = false, + .has_rom_version = true, + .fw_name = "rtl_bt/rtl8852au_fw.bin", + .cfg_name = "rtl_bt/rtl8852au_config" }, }; static const struct id_table *btrtl_match_ic(u16 lmp_subver, u16 hci_rev, @@ -250,6 +258,7 @@ static int rtlbt_parse_firmware(struct hci_dev *hdev, { RTL_ROM_LMP_8821A, 10 }, /* 8821C */ { RTL_ROM_LMP_8822B, 13 }, /* 8822C */ { RTL_ROM_LMP_8761A, 14 }, /* 8761B */ + { RTL_ROM_LMP_8852A, 18 }, /* 8852A */ }; min_size = sizeof(struct rtl_epatch_header) + sizeof(extension_sig) + 3; @@ -679,6 +688,7 @@ int btrtl_download_firmware(struct hci_dev *hdev, case RTL_ROM_LMP_8821A: case RTL_ROM_LMP_8761A: case RTL_ROM_LMP_8822B: + case RTL_ROM_LMP_8852A: return btrtl_setup_rtl8723b(hdev, btrtl_dev); default: rtl_dev_info(hdev, "assuming no firmware upload needed"); @@ -854,3 +864,5 @@ MODULE_FIRMWARE("rtl_bt/rtl8821a_fw.bin"); MODULE_FIRMWARE("rtl_bt/rtl8821a_config.bin"); MODULE_FIRMWARE("rtl_bt/rtl8822b_fw.bin"); MODULE_FIRMWARE("rtl_bt/rtl8822b_config.bin"); +MODULE_FIRMWARE("rtl_bt/rtl8852au_fw.bin"); +MODULE_FIRMWARE("rtl_bt/rtl8852au_config.bin"); diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index 4a1f877616d6..1ff9e2840b89 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -386,6 +386,10 @@ static const struct usb_device_id blacklist_table[] = { { USB_DEVICE(0x0bda, 0xb00c), .driver_info = BTUSB_REALTEK | BTUSB_WIDEBAND_SPEECH }, + /* Realtek 8852AE Bluetooth devices */ + { USB_DEVICE(0x0bda, 0xc852), .driver_info = BTUSB_REALTEK | + BTUSB_WIDEBAND_SPEECH }, + /* Realtek Bluetooth devices */ { USB_VENDOR_AND_INTERFACE_INFO(0x0bda, 0xe0, 0x01, 0x01), .driver_info = BTUSB_REALTEK },