| Message ID | 20210621223141.1638189-4-dmitry.baryshkov@linaro.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Add support for Qualcomm QCA639x chips family | expand |
On Mon 21 Jun 17:31 CDT 2021, Dmitry Baryshkov wrote: > In order to simplify probe function provide default device data. This > removes the rest of if (data) checks. > Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Regards, Bjorn > Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> > --- > drivers/bluetooth/hci_qca.c | 24 ++++++++++++++---------- > 1 file changed, 14 insertions(+), 10 deletions(-) > > diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c > index 53deea2eb7b4..3704dbadba1d 100644 > --- a/drivers/bluetooth/hci_qca.c > +++ b/drivers/bluetooth/hci_qca.c > @@ -1874,6 +1874,11 @@ static const struct qca_device_data qca_soc_data_wcn6750 = { > .capabilities = QCA_CAP_WIDEBAND_SPEECH | QCA_CAP_VALID_LE_STATES, > }; > > +static const struct qca_device_data qca_soc_data_default = { > + .soc_type = QCA_ROME, > + .num_vregs = 0, > +}; > + > static void qca_power_shutdown(struct hci_uart *hu) > { > struct qca_serdev *qcadev; > @@ -2019,12 +2024,15 @@ static int qca_serdev_probe(struct serdev_device *serdev) > int err; > bool power_ctrl_enabled = true; > > + data = device_get_match_data(&serdev->dev); > + if (!data) > + return -EINVAL; > + > qcadev = devm_kzalloc(&serdev->dev, sizeof(*qcadev), GFP_KERNEL); > if (!qcadev) > return -ENOMEM; > > qcadev->serdev_hu.serdev = serdev; > - data = device_get_match_data(&serdev->dev); > serdev_device_set_drvdata(serdev, qcadev); > device_property_read_string(&serdev->dev, "firmware-name", > &qcadev->firmware_name); > @@ -2033,9 +2041,8 @@ static int qca_serdev_probe(struct serdev_device *serdev) > if (!qcadev->oper_speed) > BT_DBG("UART will pick default operating speed"); > > - if (data && > - (qca_is_wcn399x(data->soc_type) || > - qca_is_wcn6750(data->soc_type))) { > + if ((qca_is_wcn399x(data->soc_type) || > + qca_is_wcn6750(data->soc_type))) { > qcadev->btsoc_type = data->soc_type; > qcadev->bt_power = devm_kzalloc(&serdev->dev, > sizeof(struct qca_power), > @@ -2077,10 +2084,7 @@ static int qca_serdev_probe(struct serdev_device *serdev) > return err; > } > } else { > - if (data) > - qcadev->btsoc_type = data->soc_type; > - else > - qcadev->btsoc_type = QCA_ROME; > + qcadev->btsoc_type = data->soc_type; > > qcadev->bt_en = devm_gpiod_get_optional(&serdev->dev, "enable", > GPIOD_OUT_LOW); > @@ -2309,9 +2313,9 @@ static SIMPLE_DEV_PM_OPS(qca_pm_ops, qca_suspend, qca_resume); > > #ifdef CONFIG_OF > static const struct of_device_id qca_bluetooth_of_match[] = { > - { .compatible = "qcom,qca6174-bt" }, > + { .compatible = "qcom,qca6174-bt", .data = &qca_soc_data_default}, > { .compatible = "qcom,qca6390-bt", .data = &qca_soc_data_qca6390}, > - { .compatible = "qcom,qca9377-bt" }, > + { .compatible = "qcom,qca9377-bt", .data = &qca_soc_data_default}, > { .compatible = "qcom,wcn3990-bt", .data = &qca_soc_data_wcn3990}, > { .compatible = "qcom,wcn3991-bt", .data = &qca_soc_data_wcn3991}, > { .compatible = "qcom,wcn3998-bt", .data = &qca_soc_data_wcn3998}, > -- > 2.30.2 >
diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c index 53deea2eb7b4..3704dbadba1d 100644 --- a/drivers/bluetooth/hci_qca.c +++ b/drivers/bluetooth/hci_qca.c @@ -1874,6 +1874,11 @@ static const struct qca_device_data qca_soc_data_wcn6750 = { .capabilities = QCA_CAP_WIDEBAND_SPEECH | QCA_CAP_VALID_LE_STATES, }; +static const struct qca_device_data qca_soc_data_default = { + .soc_type = QCA_ROME, + .num_vregs = 0, +}; + static void qca_power_shutdown(struct hci_uart *hu) { struct qca_serdev *qcadev; @@ -2019,12 +2024,15 @@ static int qca_serdev_probe(struct serdev_device *serdev) int err; bool power_ctrl_enabled = true; + data = device_get_match_data(&serdev->dev); + if (!data) + return -EINVAL; + qcadev = devm_kzalloc(&serdev->dev, sizeof(*qcadev), GFP_KERNEL); if (!qcadev) return -ENOMEM; qcadev->serdev_hu.serdev = serdev; - data = device_get_match_data(&serdev->dev); serdev_device_set_drvdata(serdev, qcadev); device_property_read_string(&serdev->dev, "firmware-name", &qcadev->firmware_name); @@ -2033,9 +2041,8 @@ static int qca_serdev_probe(struct serdev_device *serdev) if (!qcadev->oper_speed) BT_DBG("UART will pick default operating speed"); - if (data && - (qca_is_wcn399x(data->soc_type) || - qca_is_wcn6750(data->soc_type))) { + if ((qca_is_wcn399x(data->soc_type) || + qca_is_wcn6750(data->soc_type))) { qcadev->btsoc_type = data->soc_type; qcadev->bt_power = devm_kzalloc(&serdev->dev, sizeof(struct qca_power), @@ -2077,10 +2084,7 @@ static int qca_serdev_probe(struct serdev_device *serdev) return err; } } else { - if (data) - qcadev->btsoc_type = data->soc_type; - else - qcadev->btsoc_type = QCA_ROME; + qcadev->btsoc_type = data->soc_type; qcadev->bt_en = devm_gpiod_get_optional(&serdev->dev, "enable", GPIOD_OUT_LOW); @@ -2309,9 +2313,9 @@ static SIMPLE_DEV_PM_OPS(qca_pm_ops, qca_suspend, qca_resume); #ifdef CONFIG_OF static const struct of_device_id qca_bluetooth_of_match[] = { - { .compatible = "qcom,qca6174-bt" }, + { .compatible = "qcom,qca6174-bt", .data = &qca_soc_data_default}, { .compatible = "qcom,qca6390-bt", .data = &qca_soc_data_qca6390}, - { .compatible = "qcom,qca9377-bt" }, + { .compatible = "qcom,qca9377-bt", .data = &qca_soc_data_default}, { .compatible = "qcom,wcn3990-bt", .data = &qca_soc_data_wcn3990}, { .compatible = "qcom,wcn3991-bt", .data = &qca_soc_data_wcn3991}, { .compatible = "qcom,wcn3998-bt", .data = &qca_soc_data_wcn3998},
In order to simplify probe function provide default device data. This removes the rest of if (data) checks. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> --- drivers/bluetooth/hci_qca.c | 24 ++++++++++++++---------- 1 file changed, 14 insertions(+), 10 deletions(-)