Message ID | 20210621223141.1638189-5-dmitry.baryshkov@linaro.org (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Series | Add support for Qualcomm QCA639x chips family | expand |
On Mon 21 Jun 17:31 CDT 2021, Dmitry Baryshkov wrote: > There is no need to allocate separate structure for handling regulators > used by QCA chips, we gain nothing from it. Move all used data fields > directly to struct qca_serdev. > Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Regards, Bjorn > Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> > --- > drivers/bluetooth/hci_qca.c | 58 ++++++++++++++----------------------- > 1 file changed, 22 insertions(+), 36 deletions(-) > > diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c > index 3704dbadba1d..9cc8a9153d76 100644 > --- a/drivers/bluetooth/hci_qca.c > +++ b/drivers/bluetooth/hci_qca.c > @@ -208,20 +208,15 @@ struct qca_device_data { > /* > * Platform data for the QCA Bluetooth power driver. > */ > -struct qca_power { > - struct device *dev; > - struct regulator_bulk_data *vreg_bulk; > - int num_vregs; > - bool vregs_on; > -}; > - > struct qca_serdev { > struct hci_uart serdev_hu; > struct gpio_desc *bt_en; > struct gpio_desc *sw_ctrl; > struct clk *susclk; > enum qca_btsoc_type btsoc_type; > - struct qca_power *bt_power; > + struct regulator_bulk_data *vreg_bulk; > + int num_vregs; > + bool vregs_on; > u32 init_speed; > u32 oper_speed; > const char *firmware_name; > @@ -1602,7 +1597,7 @@ static int qca_regulator_init(struct hci_uart *hu) > * off the voltage regulator. > */ > qcadev = serdev_device_get_drvdata(hu->serdev); > - if (!qcadev->bt_power->vregs_on) { > + if (!qcadev->vregs_on) { > serdev_device_close(hu->serdev); > ret = qca_regulator_enable(qcadev); > if (ret) > @@ -1945,20 +1940,19 @@ static int qca_power_off(struct hci_dev *hdev) > > static int qca_regulator_enable(struct qca_serdev *qcadev) > { > - struct qca_power *power = qcadev->bt_power; > int ret; > > /* Already enabled */ > - if (power->vregs_on) > + if (qcadev->vregs_on) > return 0; > > - BT_DBG("enabling %d regulators)", power->num_vregs); > + BT_DBG("enabling %d regulators)", qcadev->num_vregs); > > - ret = regulator_bulk_enable(power->num_vregs, power->vreg_bulk); > + ret = regulator_bulk_enable(qcadev->num_vregs, qcadev->vreg_bulk); > if (ret) > return ret; > > - power->vregs_on = true; > + qcadev->vregs_on = true; > > ret = clk_prepare_enable(qcadev->susclk); > if (ret) > @@ -1969,38 +1963,37 @@ static int qca_regulator_enable(struct qca_serdev *qcadev) > > static void qca_regulator_disable(struct qca_serdev *qcadev) > { > - struct qca_power *power; > - > if (!qcadev) > return; > > - power = qcadev->bt_power; > - > /* Already disabled? */ > - if (!power->vregs_on) > + if (!qcadev->vregs_on) > return; > > - regulator_bulk_disable(power->num_vregs, power->vreg_bulk); > - power->vregs_on = false; > + regulator_bulk_disable(qcadev->num_vregs, qcadev->vreg_bulk); > + qcadev->vregs_on = false; > > clk_disable_unprepare(qcadev->susclk); > } > > -static int qca_init_regulators(struct qca_power *qca, > - const struct qca_vreg *vregs, size_t num_vregs) > +static int qca_init_regulators(struct device *dev, struct qca_serdev *qca, > + const struct qca_vreg *vregs, size_t num_vregs) > { > struct regulator_bulk_data *bulk; > int ret; > int i; > > - bulk = devm_kcalloc(qca->dev, num_vregs, sizeof(*bulk), GFP_KERNEL); > + if (!num_vregs) > + return 0; > + > + bulk = devm_kcalloc(dev, num_vregs, sizeof(*bulk), GFP_KERNEL); > if (!bulk) > return -ENOMEM; > > for (i = 0; i < num_vregs; i++) > bulk[i].supply = vregs[i].name; > > - ret = devm_regulator_bulk_get(qca->dev, num_vregs, bulk); > + ret = devm_regulator_bulk_get(dev, num_vregs, bulk); > if (ret < 0) > return ret; > > @@ -2044,21 +2037,15 @@ static int qca_serdev_probe(struct serdev_device *serdev) > if ((qca_is_wcn399x(data->soc_type) || > qca_is_wcn6750(data->soc_type))) { > qcadev->btsoc_type = data->soc_type; > - qcadev->bt_power = devm_kzalloc(&serdev->dev, > - sizeof(struct qca_power), > - GFP_KERNEL); > - if (!qcadev->bt_power) > - return -ENOMEM; > - > - qcadev->bt_power->dev = &serdev->dev; > - err = qca_init_regulators(qcadev->bt_power, data->vregs, > + > + err = qca_init_regulators(&serdev->dev, qcadev, data->vregs, > data->num_vregs); > if (err) { > BT_ERR("Failed to init regulators:%d", err); > return err; > } > > - qcadev->bt_power->vregs_on = false; > + qcadev->vregs_on = false; > > qcadev->bt_en = devm_gpiod_get_optional(&serdev->dev, "enable", > GPIOD_OUT_LOW); > @@ -2139,11 +2126,10 @@ static int qca_serdev_probe(struct serdev_device *serdev) > static void qca_serdev_remove(struct serdev_device *serdev) > { > struct qca_serdev *qcadev = serdev_device_get_drvdata(serdev); > - struct qca_power *power = qcadev->bt_power; > > if ((qca_is_wcn399x(qcadev->btsoc_type) || > qca_is_wcn6750(qcadev->btsoc_type)) && > - power->vregs_on) > + qcadev->vregs_on) > qca_power_shutdown(&qcadev->serdev_hu); > else if (qcadev->susclk) > clk_disable_unprepare(qcadev->susclk); > -- > 2.30.2 >
diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c index 3704dbadba1d..9cc8a9153d76 100644 --- a/drivers/bluetooth/hci_qca.c +++ b/drivers/bluetooth/hci_qca.c @@ -208,20 +208,15 @@ struct qca_device_data { /* * Platform data for the QCA Bluetooth power driver. */ -struct qca_power { - struct device *dev; - struct regulator_bulk_data *vreg_bulk; - int num_vregs; - bool vregs_on; -}; - struct qca_serdev { struct hci_uart serdev_hu; struct gpio_desc *bt_en; struct gpio_desc *sw_ctrl; struct clk *susclk; enum qca_btsoc_type btsoc_type; - struct qca_power *bt_power; + struct regulator_bulk_data *vreg_bulk; + int num_vregs; + bool vregs_on; u32 init_speed; u32 oper_speed; const char *firmware_name; @@ -1602,7 +1597,7 @@ static int qca_regulator_init(struct hci_uart *hu) * off the voltage regulator. */ qcadev = serdev_device_get_drvdata(hu->serdev); - if (!qcadev->bt_power->vregs_on) { + if (!qcadev->vregs_on) { serdev_device_close(hu->serdev); ret = qca_regulator_enable(qcadev); if (ret) @@ -1945,20 +1940,19 @@ static int qca_power_off(struct hci_dev *hdev) static int qca_regulator_enable(struct qca_serdev *qcadev) { - struct qca_power *power = qcadev->bt_power; int ret; /* Already enabled */ - if (power->vregs_on) + if (qcadev->vregs_on) return 0; - BT_DBG("enabling %d regulators)", power->num_vregs); + BT_DBG("enabling %d regulators)", qcadev->num_vregs); - ret = regulator_bulk_enable(power->num_vregs, power->vreg_bulk); + ret = regulator_bulk_enable(qcadev->num_vregs, qcadev->vreg_bulk); if (ret) return ret; - power->vregs_on = true; + qcadev->vregs_on = true; ret = clk_prepare_enable(qcadev->susclk); if (ret) @@ -1969,38 +1963,37 @@ static int qca_regulator_enable(struct qca_serdev *qcadev) static void qca_regulator_disable(struct qca_serdev *qcadev) { - struct qca_power *power; - if (!qcadev) return; - power = qcadev->bt_power; - /* Already disabled? */ - if (!power->vregs_on) + if (!qcadev->vregs_on) return; - regulator_bulk_disable(power->num_vregs, power->vreg_bulk); - power->vregs_on = false; + regulator_bulk_disable(qcadev->num_vregs, qcadev->vreg_bulk); + qcadev->vregs_on = false; clk_disable_unprepare(qcadev->susclk); } -static int qca_init_regulators(struct qca_power *qca, - const struct qca_vreg *vregs, size_t num_vregs) +static int qca_init_regulators(struct device *dev, struct qca_serdev *qca, + const struct qca_vreg *vregs, size_t num_vregs) { struct regulator_bulk_data *bulk; int ret; int i; - bulk = devm_kcalloc(qca->dev, num_vregs, sizeof(*bulk), GFP_KERNEL); + if (!num_vregs) + return 0; + + bulk = devm_kcalloc(dev, num_vregs, sizeof(*bulk), GFP_KERNEL); if (!bulk) return -ENOMEM; for (i = 0; i < num_vregs; i++) bulk[i].supply = vregs[i].name; - ret = devm_regulator_bulk_get(qca->dev, num_vregs, bulk); + ret = devm_regulator_bulk_get(dev, num_vregs, bulk); if (ret < 0) return ret; @@ -2044,21 +2037,15 @@ static int qca_serdev_probe(struct serdev_device *serdev) if ((qca_is_wcn399x(data->soc_type) || qca_is_wcn6750(data->soc_type))) { qcadev->btsoc_type = data->soc_type; - qcadev->bt_power = devm_kzalloc(&serdev->dev, - sizeof(struct qca_power), - GFP_KERNEL); - if (!qcadev->bt_power) - return -ENOMEM; - - qcadev->bt_power->dev = &serdev->dev; - err = qca_init_regulators(qcadev->bt_power, data->vregs, + + err = qca_init_regulators(&serdev->dev, qcadev, data->vregs, data->num_vregs); if (err) { BT_ERR("Failed to init regulators:%d", err); return err; } - qcadev->bt_power->vregs_on = false; + qcadev->vregs_on = false; qcadev->bt_en = devm_gpiod_get_optional(&serdev->dev, "enable", GPIOD_OUT_LOW); @@ -2139,11 +2126,10 @@ static int qca_serdev_probe(struct serdev_device *serdev) static void qca_serdev_remove(struct serdev_device *serdev) { struct qca_serdev *qcadev = serdev_device_get_drvdata(serdev); - struct qca_power *power = qcadev->bt_power; if ((qca_is_wcn399x(qcadev->btsoc_type) || qca_is_wcn6750(qcadev->btsoc_type)) && - power->vregs_on) + qcadev->vregs_on) qca_power_shutdown(&qcadev->serdev_hu); else if (qcadev->susclk) clk_disable_unprepare(qcadev->susclk);
There is no need to allocate separate structure for handling regulators used by QCA chips, we gain nothing from it. Move all used data fields directly to struct qca_serdev. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> --- drivers/bluetooth/hci_qca.c | 58 ++++++++++++++----------------------- 1 file changed, 22 insertions(+), 36 deletions(-)