| Message ID | 20210809174358.163525-1-kai.heng.feng@canonical.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Bluetooth: Move shutdown callback before flushing tx and rx queue | expand |
This is automated email and please do not reply to this email!
Dear submitter,
Thank you for submitting the patches to the linux bluetooth mailing list.
This is a CI test results with your patch series:
PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=528639
---Test result---
Test Summary:
CheckPatch FAIL 0.56 seconds
GitLint FAIL 0.13 seconds
BuildKernel PASS 630.13 seconds
TestRunner: Setup PASS 401.12 seconds
TestRunner: l2cap-tester PASS 2.88 seconds
TestRunner: bnep-tester PASS 2.08 seconds
TestRunner: mgmt-tester PASS 32.17 seconds
TestRunner: rfcomm-tester PASS 2.44 seconds
TestRunner: sco-tester PASS 2.28 seconds
TestRunner: smp-tester FAIL 2.40 seconds
TestRunner: userchan-tester PASS 2.21 seconds
Details
##############################
Test: CheckPatch - FAIL - 0.56 seconds
Run checkpatch.pl script with rule in .checkpatch.conf
Bluetooth: Move shutdown callback before flushing tx and rx queue
WARNING: Unknown commit id '0ea9fd001a14', maybe rebased or not pulled?
#7:
Commit 0ea9fd001a14 ("Bluetooth: Shutdown controller after workqueues
WARNING: Unknown commit id '0ea9fd001a14', maybe rebased or not pulled?
#32:
Fixes: 0ea9fd001a14 ("Bluetooth: Shutdown controller after workqueues are flushed or cancelled")
total: 0 errors, 2 warnings, 0 checks, 28 lines checked
NOTE: For some of the reported defects, checkpatch may be able to
mechanically convert to the typical style using --fix or --fix-inplace.
"[PATCH] Bluetooth: Move shutdown callback before flushing tx and rx" has style problems, please review.
NOTE: If any of the errors are false positives, please report
them to the maintainer, see CHECKPATCH in MAINTAINERS.
##############################
Test: GitLint - FAIL - 0.13 seconds
Run gitlint with rule in .gitlint
Bluetooth: Move shutdown callback before flushing tx and rx queue
28: B1 Line exceeds max length (96>80): "Fixes: 0ea9fd001a14 ("Bluetooth: Shutdown controller after workqueues are flushed or cancelled")"
##############################
Test: BuildKernel - PASS - 630.13 seconds
Build Kernel with minimal configuration supports Bluetooth
##############################
Test: TestRunner: Setup - PASS - 401.12 seconds
Setup environment for running Test Runner
##############################
Test: TestRunner: l2cap-tester - PASS - 2.88 seconds
Run test-runner with l2cap-tester
Total: 40, Passed: 40 (100.0%), Failed: 0, Not Run: 0
##############################
Test: TestRunner: bnep-tester - PASS - 2.08 seconds
Run test-runner with bnep-tester
Total: 1, Passed: 1 (100.0%), Failed: 0, Not Run: 0
##############################
Test: TestRunner: mgmt-tester - PASS - 32.17 seconds
Run test-runner with mgmt-tester
Total: 448, Passed: 445 (99.3%), Failed: 0, Not Run: 3
##############################
Test: TestRunner: rfcomm-tester - PASS - 2.44 seconds
Run test-runner with rfcomm-tester
Total: 9, Passed: 9 (100.0%), Failed: 0, Not Run: 0
##############################
Test: TestRunner: sco-tester - PASS - 2.28 seconds
Run test-runner with sco-tester
Total: 8, Passed: 8 (100.0%), Failed: 0, Not Run: 0
##############################
Test: TestRunner: smp-tester - FAIL - 2.40 seconds
Run test-runner with smp-tester
Total: 8, Passed: 7 (87.5%), Failed: 1, Not Run: 0
Failed Test Cases
SMP Client - SC Request 2 Failed 0.024 seconds
##############################
Test: TestRunner: userchan-tester - PASS - 2.21 seconds
Run test-runner with userchan-tester
Total: 3, Passed: 3 (100.0%), Failed: 0, Not Run: 0
---
Regards,
Linux Bluetooth
On Tue, Aug 10, 2021 at 1:44 AM Kai-Heng Feng <kai.heng.feng@canonical.com> wrote: > > Commit 0ea9fd001a14 ("Bluetooth: Shutdown controller after workqueues > are flushed or cancelled") introduced a regression that makes mtkbtsdio > driver stops working: > [ 36.593956] Bluetooth: hci0: Firmware already downloaded > [ 46.814613] Bluetooth: hci0: Execution of wmt command timed out > [ 46.814619] Bluetooth: hci0: Failed to send wmt func ctrl (-110) > > The shutdown callback depends on the result of hdev->rx_work, so we > should call it before flushing rx_work: > -> btmtksdio_shutdown() > -> mtk_hci_wmt_sync() > -> __hci_cmd_send() > -> wait for BTMTKSDIO_TX_WAIT_VND_EVT gets cleared > > -> btmtksdio_recv_event() > -> hci_recv_frame() > -> queue_work(hdev->workqueue, &hdev->rx_work) > -> clears BTMTKSDIO_TX_WAIT_VND_EVT > > So move the shutdown callback before flushing TX/RX queue to resolve the > issue. > > Reported-and-tested-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> > Tested-by: Hsin-Yi Wang <hsinyi@chromium.org> Hello, Sorry for confusion, but the version I tested is this one: https://lkml.org/lkml/2021/8/4/486 (shutdown is prior to the test_and_clear HCI_UP) I tested this version and still see the error I've seen before. > Cc: Guenter Roeck <linux@roeck-us.net> > Fixes: 0ea9fd001a14 ("Bluetooth: Shutdown controller after workqueues are flushed or cancelled") > Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> > --- > net/bluetooth/hci_core.c | 16 ++++++++-------- > 1 file changed, 8 insertions(+), 8 deletions(-) > > diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c > index cb2e9e513907..8da04c899197 100644 > --- a/net/bluetooth/hci_core.c > +++ b/net/bluetooth/hci_core.c > @@ -1735,6 +1735,14 @@ int hci_dev_do_close(struct hci_dev *hdev) > > hci_leds_update_powered(hdev, false); > > + if (!hci_dev_test_flag(hdev, HCI_UNREGISTER) && > + !hci_dev_test_flag(hdev, HCI_USER_CHANNEL) && > + test_bit(HCI_UP, &hdev->flags)) { > + /* Execute vendor specific shutdown routine */ > + if (hdev->shutdown) > + hdev->shutdown(hdev); > + } > + > /* Flush RX and TX works */ > flush_work(&hdev->tx_work); > flush_work(&hdev->rx_work); > @@ -1798,14 +1806,6 @@ int hci_dev_do_close(struct hci_dev *hdev) > clear_bit(HCI_INIT, &hdev->flags); > } > > - if (!hci_dev_test_flag(hdev, HCI_UNREGISTER) && > - !hci_dev_test_flag(hdev, HCI_USER_CHANNEL) && > - test_bit(HCI_UP, &hdev->flags)) { > - /* Execute vendor specific shutdown routine */ > - if (hdev->shutdown) > - hdev->shutdown(hdev); > - } > - > /* flush cmd work */ > flush_work(&hdev->cmd_work); > > -- > 2.31.1 >
On Tue, Aug 10, 2021 at 12:10 PM Hsin-Yi Wang <hsinyi@chromium.org> wrote: > > On Tue, Aug 10, 2021 at 1:44 AM Kai-Heng Feng > <kai.heng.feng@canonical.com> wrote: > > > > Commit 0ea9fd001a14 ("Bluetooth: Shutdown controller after workqueues > > are flushed or cancelled") introduced a regression that makes mtkbtsdio > > driver stops working: > > [ 36.593956] Bluetooth: hci0: Firmware already downloaded > > [ 46.814613] Bluetooth: hci0: Execution of wmt command timed out > > [ 46.814619] Bluetooth: hci0: Failed to send wmt func ctrl (-110) > > > > The shutdown callback depends on the result of hdev->rx_work, so we > > should call it before flushing rx_work: > > -> btmtksdio_shutdown() > > -> mtk_hci_wmt_sync() > > -> __hci_cmd_send() > > -> wait for BTMTKSDIO_TX_WAIT_VND_EVT gets cleared > > > > -> btmtksdio_recv_event() > > -> hci_recv_frame() > > -> queue_work(hdev->workqueue, &hdev->rx_work) > > -> clears BTMTKSDIO_TX_WAIT_VND_EVT > > > > So move the shutdown callback before flushing TX/RX queue to resolve the > > issue. > > > > Reported-and-tested-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> > > Tested-by: Hsin-Yi Wang <hsinyi@chromium.org> > > Hello, > > Sorry for confusion, but the version I tested is this one: > https://lkml.org/lkml/2021/8/4/486 (shutdown is prior to the > test_and_clear HCI_UP) > I tested this version and still see the error I've seen before. Ah, sorry for causing your trouble, I am the one who got confused :( HCI_UP is obviously required for hci_req_sync() to work. Let me resend one, and sorry again! Kai-Heng > > > > > > Cc: Guenter Roeck <linux@roeck-us.net> > > Fixes: 0ea9fd001a14 ("Bluetooth: Shutdown controller after workqueues are flushed or cancelled") > > Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> > > --- > > net/bluetooth/hci_core.c | 16 ++++++++-------- > > 1 file changed, 8 insertions(+), 8 deletions(-) > > > > diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c > > index cb2e9e513907..8da04c899197 100644 > > --- a/net/bluetooth/hci_core.c > > +++ b/net/bluetooth/hci_core.c > > @@ -1735,6 +1735,14 @@ int hci_dev_do_close(struct hci_dev *hdev) > > > > hci_leds_update_powered(hdev, false); > > > > + if (!hci_dev_test_flag(hdev, HCI_UNREGISTER) && > > + !hci_dev_test_flag(hdev, HCI_USER_CHANNEL) && > > + test_bit(HCI_UP, &hdev->flags)) { > > + /* Execute vendor specific shutdown routine */ > > + if (hdev->shutdown) > > + hdev->shutdown(hdev); > > + } > > + > > /* Flush RX and TX works */ > > flush_work(&hdev->tx_work); > > flush_work(&hdev->rx_work); > > @@ -1798,14 +1806,6 @@ int hci_dev_do_close(struct hci_dev *hdev) > > clear_bit(HCI_INIT, &hdev->flags); > > } > > > > - if (!hci_dev_test_flag(hdev, HCI_UNREGISTER) && > > - !hci_dev_test_flag(hdev, HCI_USER_CHANNEL) && > > - test_bit(HCI_UP, &hdev->flags)) { > > - /* Execute vendor specific shutdown routine */ > > - if (hdev->shutdown) > > - hdev->shutdown(hdev); > > - } > > - > > /* flush cmd work */ > > flush_work(&hdev->cmd_work); > > > > -- > > 2.31.1 > >
diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c index cb2e9e513907..8da04c899197 100644 --- a/net/bluetooth/hci_core.c +++ b/net/bluetooth/hci_core.c @@ -1735,6 +1735,14 @@ int hci_dev_do_close(struct hci_dev *hdev) hci_leds_update_powered(hdev, false); + if (!hci_dev_test_flag(hdev, HCI_UNREGISTER) && + !hci_dev_test_flag(hdev, HCI_USER_CHANNEL) && + test_bit(HCI_UP, &hdev->flags)) { + /* Execute vendor specific shutdown routine */ + if (hdev->shutdown) + hdev->shutdown(hdev); + } + /* Flush RX and TX works */ flush_work(&hdev->tx_work); flush_work(&hdev->rx_work); @@ -1798,14 +1806,6 @@ int hci_dev_do_close(struct hci_dev *hdev) clear_bit(HCI_INIT, &hdev->flags); } - if (!hci_dev_test_flag(hdev, HCI_UNREGISTER) && - !hci_dev_test_flag(hdev, HCI_USER_CHANNEL) && - test_bit(HCI_UP, &hdev->flags)) { - /* Execute vendor specific shutdown routine */ - if (hdev->shutdown) - hdev->shutdown(hdev); - } - /* flush cmd work */ flush_work(&hdev->cmd_work);
Commit 0ea9fd001a14 ("Bluetooth: Shutdown controller after workqueues are flushed or cancelled") introduced a regression that makes mtkbtsdio driver stops working: [ 36.593956] Bluetooth: hci0: Firmware already downloaded [ 46.814613] Bluetooth: hci0: Execution of wmt command timed out [ 46.814619] Bluetooth: hci0: Failed to send wmt func ctrl (-110) The shutdown callback depends on the result of hdev->rx_work, so we should call it before flushing rx_work: -> btmtksdio_shutdown() -> mtk_hci_wmt_sync() -> __hci_cmd_send() -> wait for BTMTKSDIO_TX_WAIT_VND_EVT gets cleared -> btmtksdio_recv_event() -> hci_recv_frame() -> queue_work(hdev->workqueue, &hdev->rx_work) -> clears BTMTKSDIO_TX_WAIT_VND_EVT So move the shutdown callback before flushing TX/RX queue to resolve the issue. Reported-and-tested-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Tested-by: Hsin-Yi Wang <hsinyi@chromium.org> Cc: Guenter Roeck <linux@roeck-us.net> Fixes: 0ea9fd001a14 ("Bluetooth: Shutdown controller after workqueues are flushed or cancelled") Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> --- net/bluetooth/hci_core.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-)