diff mbox series

[v3] Bluetooth: When HCI work queue is drained, only queue chained work

Message ID 20220603081914.42512-1-schspa@gmail.com (mailing list archive)
State Accepted
Commit dba7abaead13f9dbf4e946f874127eae427d9947
Headers show
Series [v3] Bluetooth: When HCI work queue is drained, only queue chained work | expand

Checks

Context Check Description
tedd_an/pre-ci_am success Success
tedd_an/checkpatch success Checkpatch PASS
tedd_an/gitlint success Gitlint PASS
tedd_an/subjectprefix success PASS
tedd_an/buildkernel success Build Kernel PASS
tedd_an/buildkernel32 success Build Kernel32 PASS
tedd_an/incremental_build success Pass
tedd_an/testrunnersetup success Test Runner Setup PASS
tedd_an/testrunnerl2cap-tester success Total: 40, Passed: 40 (100.0%), Failed: 0, Not Run: 0
tedd_an/testrunnerbnep-tester success Total: 1, Passed: 1 (100.0%), Failed: 0, Not Run: 0
tedd_an/testrunnermgmt-tester success Total: 493, Passed: 493 (100.0%), Failed: 0, Not Run: 0
tedd_an/testrunnerrfcomm-tester success Total: 10, Passed: 10 (100.0%), Failed: 0, Not Run: 0
tedd_an/testrunnersco-tester success Total: 12, Passed: 12 (100.0%), Failed: 0, Not Run: 0
tedd_an/testrunnersmp-tester success Total: 8, Passed: 8 (100.0%), Failed: 0, Not Run: 0
tedd_an/testrunneruserchan-tester success Total: 4, Passed: 4 (100.0%), Failed: 0, Not Run: 0

Commit Message

Schspa Shi June 3, 2022, 8:19 a.m. UTC 
The HCI command, event, and data packet processing workqueue is drained
to avoid deadlock in commit
76727c02c1e1 ("Bluetooth: Call drain_workqueue() before resetting state").

There is another delayed work, which will queue command to this drained
workqueue. Which results in the following error report:

Bluetooth: hci2: command 0x040f tx timeout
WARNING: CPU: 1 PID: 18374 at kernel/workqueue.c:1438 __queue_work+0xdad/0x1140
Workqueue: events hci_cmd_timeout
RIP: 0010:__queue_work+0xdad/0x1140
RSP: 0000:ffffc90002cffc60 EFLAGS: 00010093
RAX: 0000000000000000 RBX: ffff8880b9d3ec00 RCX: 0000000000000000
RDX: ffff888024ba0000 RSI: ffffffff814e048d RDI: ffff8880b9d3ec08
RBP: 0000000000000008 R08: 0000000000000000 R09: 00000000b9d39700
R10: ffffffff814f73c6 R11: 0000000000000000 R12: ffff88807cce4c60
R13: 0000000000000000 R14: ffff8880796d8800 R15: ffff8880796d8800
FS:  0000000000000000(0000) GS:ffff8880b9d00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000c0174b4000 CR3: 000000007cae9000 CR4: 00000000003506e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 <TASK>
 ? queue_work_on+0xcb/0x110
 ? lockdep_hardirqs_off+0x90/0xd0
 queue_work_on+0xee/0x110
 process_one_work+0x996/0x1610
 ? pwq_dec_nr_in_flight+0x2a0/0x2a0
 ? rwlock_bug.part.0+0x90/0x90
 ? _raw_spin_lock_irq+0x41/0x50
 worker_thread+0x665/0x1080
 ? process_one_work+0x1610/0x1610
 kthread+0x2e9/0x3a0
 ? kthread_complete_and_exit+0x40/0x40
 ret_from_fork+0x1f/0x30
 </TASK>

To fix this, we can add a new HCI_DRAIN_WQ flag, and don't queue the
timeout workqueue while command workqueue is draining.

Fixes: 76727c02c1e1 ("Bluetooth: Call drain_workqueue() before resetting state")
Reported-by: syzbot+63bed493aebbf6872647@syzkaller.appspotmail.com
Signed-off-by: Schspa Shi <schspa@gmail.com>

Changelog:
v1 -> v2:
        - Move the workqueue drain flag to controller flags, and
          use hci_dev_*_flag.
        - Add missing ncmd_timer cancel.
        - Clear DRAIN_WORKQUEUE flag after device command flushed.
v2 -> v3:
        - Fix typos in comments and adjust the description.
---
 include/net/bluetooth/hci.h |  1 +
 net/bluetooth/hci_core.c    | 10 +++++++++-
 net/bluetooth/hci_event.c   |  5 +++--
 3 files changed, 13 insertions(+), 3 deletions(-)

Comments

bluez.test.bot@gmail.com June 3, 2022, 9:04 a.m. UTC | #1 
This is automated email and please do not reply to this email!

Dear submitter,

Thank you for submitting the patches to the linux bluetooth mailing list.
This is a CI test results with your patch series:
PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=647101

---Test result---

Test Summary:
CheckPatch                    PASS      1.88 seconds
GitLint                       PASS      1.05 seconds
SubjectPrefix                 PASS      0.86 seconds
BuildKernel                   PASS      30.46 seconds
BuildKernel32                 PASS      27.47 seconds
Incremental Build with patchesPASS      38.46 seconds
TestRunner: Setup             PASS      449.95 seconds
TestRunner: l2cap-tester      PASS      16.39 seconds
TestRunner: bnep-tester       PASS      5.83 seconds
TestRunner: mgmt-tester       PASS      98.99 seconds
TestRunner: rfcomm-tester     PASS      9.42 seconds
TestRunner: sco-tester        PASS      9.15 seconds
TestRunner: smp-tester        PASS      8.97 seconds
TestRunner: userchan-tester   PASS      6.00 seconds



---
Regards,
Linux Bluetooth
patchwork-bot+bluetooth@kernel.org June 3, 2022, 2:30 p.m. UTC | #2 
Hello:

This patch was applied to bluetooth/bluetooth-next.git (master)
by Marcel Holtmann <marcel@holtmann.org>:

On Fri,  3 Jun 2022 16:19:14 +0800 you wrote:
> The HCI command, event, and data packet processing workqueue is drained
> to avoid deadlock in commit
> 76727c02c1e1 ("Bluetooth: Call drain_workqueue() before resetting state").
> 
> There is another delayed work, which will queue command to this drained
> workqueue. Which results in the following error report:
> 
> [...]

Here is the summary with links:
  - [v3] Bluetooth: When HCI work queue is drained, only queue chained work
    https://git.kernel.org/bluetooth/bluetooth-next/c/dba7abaead13

You are awesome, thank you!
diff mbox series

Patch

diff --git a/include/net/bluetooth/hci.h b/include/net/bluetooth/hci.h
index fe7935be7dc4..4a45c48eb0d2 100644
--- a/include/net/bluetooth/hci.h
+++ b/include/net/bluetooth/hci.h
@@ -361,6 +361,7 @@  enum {
 	HCI_QUALITY_REPORT,
 	HCI_OFFLOAD_CODECS_ENABLED,
 	HCI_LE_SIMULTANEOUS_ROLES,
+	HCI_CMD_DRAIN_WORKQUEUE,
 
 	__HCI_NUM_FLAGS,
 };
diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c
index 5abb2ca5b129..8539b4233da8 100644
--- a/net/bluetooth/hci_core.c
+++ b/net/bluetooth/hci_core.c
@@ -593,6 +593,11 @@  static int hci_dev_do_reset(struct hci_dev *hdev)
 	skb_queue_purge(&hdev->rx_q);
 	skb_queue_purge(&hdev->cmd_q);
 
+	/* Cancel these to avoid queueing non-chained pending work */
+	hci_dev_set_flag(hdev, HCI_CMD_DRAIN_WORKQUEUE);
+	cancel_delayed_work(&hdev->cmd_timer);
+	cancel_delayed_work(&hdev->ncmd_timer);
+
 	/* Avoid potential lockdep warnings from the *_flush() calls by
 	 * ensuring the workqueue is empty up front.
 	 */
@@ -606,6 +611,8 @@  static int hci_dev_do_reset(struct hci_dev *hdev)
 	if (hdev->flush)
 		hdev->flush(hdev);
 
+	hci_dev_clear_flag(hdev, HCI_CMD_DRAIN_WORKQUEUE);
+
 	atomic_set(&hdev->cmd_cnt, 1);
 	hdev->acl_cnt = 0; hdev->sco_cnt = 0; hdev->le_cnt = 0;
 
@@ -3861,7 +3868,8 @@  static void hci_cmd_work(struct work_struct *work)
 			if (res < 0)
 				__hci_cmd_sync_cancel(hdev, -res);
 
-			if (test_bit(HCI_RESET, &hdev->flags))
+			if (test_bit(HCI_RESET, &hdev->flags) ||
+			    hci_dev_test_flag(hdev, HCI_CMD_DRAIN_WORKQUEUE))
 				cancel_delayed_work(&hdev->cmd_timer);
 			else
 				schedule_delayed_work(&hdev->cmd_timer,
diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c
index af17dfb20e01..7cb956d3abb2 100644
--- a/net/bluetooth/hci_event.c
+++ b/net/bluetooth/hci_event.c
@@ -3768,8 +3768,9 @@  static inline void handle_cmd_cnt_and_timer(struct hci_dev *hdev, u8 ncmd)
 			cancel_delayed_work(&hdev->ncmd_timer);
 			atomic_set(&hdev->cmd_cnt, 1);
 		} else {
-			schedule_delayed_work(&hdev->ncmd_timer,
-					      HCI_NCMD_TIMEOUT);
+			if (!hci_dev_test_flag(hdev, HCI_CMD_DRAIN_WORKQUEUE))
+				schedule_delayed_work(&hdev->ncmd_timer,
+						      HCI_NCMD_TIMEOUT);
 		}
 	}
 }