| Message ID | 20230213145432.1192911-3-neeraj.sanjaykale@nxp.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Add support for NXP bluetooth chipsets | expand |
| Context | Check | Description |
|---|---|---|
| tedd_an/pre-ci_am | success | Success |
| tedd_an/CheckPatch | success | CheckPatch PASS |
| tedd_an/GitLint | fail | WARNING: I3 - ignore-body-lines: gitlint will be switching from using Python regex 'match' (match beginning) to 'search' (match anywhere) semantics. Please review your ignore-body-lines.regex option accordingly. To remove this warning, set general.regex-style-search=True. More details: https://jorisroovers.github.io/gitlint/configuration/#regex-style-search 9: B1 Line exceeds max length (109>80): "v2: Modified description, added specific compatibility devices, corrected indentations. (Krzysztof Kozlowski)" 15: B1 Line exceeds max length (85>80): " create mode 100644 Documentation/devicetree/bindings/net/bluetooth/nxp,w8xxx-bt.yaml" |
| tedd_an/SubjectPrefix | fail | "Bluetooth: " prefix is not specified in the subject |
| tedd_an/IncrementalBuild | success | Incremental Build PASS |
On 13/02/2023 15:54, Neeraj Sanjay Kale wrote: > Add binding document for NXP bluetooth chipsets attached > over UART. > > Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com> > --- > v2: Resolved dt_binding_check errors. (Rob Herring) > v2: Modified description, added specific compatibility devices, corrected indentations. (Krzysztof Kozlowski) > v3: Modified description, renamed file (Krzysztof Kozlowski) > --- > .../bindings/net/bluetooth/nxp,w8xxx-bt.yaml | 44 +++++++++++++++++++ I don't think I proposed such filename. > MAINTAINERS | 7 +++ > 2 files changed, 51 insertions(+) > create mode 100644 Documentation/devicetree/bindings/net/bluetooth/nxp,w8xxx-bt.yaml > > diff --git a/Documentation/devicetree/bindings/net/bluetooth/nxp,w8xxx-bt.yaml b/Documentation/devicetree/bindings/net/bluetooth/nxp,w8xxx-bt.yaml > new file mode 100644 > index 000000000000..2685f6d5904f > --- /dev/null > +++ b/Documentation/devicetree/bindings/net/bluetooth/nxp,w8xxx-bt.yaml > @@ -0,0 +1,44 @@ > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/net/bluetooth/nxp-bluetooth.yaml# Does not look like you tested the bindings. Please run `make dt_binding_check` (see Documentation/devicetree/bindings/writing-schema.rst for instructions). > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: NXP Bluetooth chips > + > +description: > + This binding describes UART-attached NXP bluetooth chips. > + These chips are dual-radio chips supporting WiFi and Bluetooth, > + except for iw612, which is a tri-radio chip supporting 15.4 > + as well. > + The bluetooth works on standard H4 protocol over 4-wire UART. > + The RTS and CTS lines are used during FW download. > + To enable power save mode, the host asserts break signal > + over UART-TX line to put the chip into power save state. > + De-asserting break wakes-up the BT chip. > + > +maintainers: > + - Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com> > + > +properties: > + compatible: > + enum: > + - nxp,88w8987-bt > + - nxp,88w8997-bt > + - nxp,88w9098-bt > + - nxp,iw416-bt > + - nxp,iw612-bt > + > +required: > + - compatible > + > +additionalProperties: false > + > +examples: > + - | > + uart2 { This is a friendly reminder during the review process. It seems my previous comments were not fully addressed. Maybe my feedback got lost between the quotes, maybe you just forgot to apply it. Please go back to the previous discussion and either implement all requested changes or keep discussing them. Thank you. > + uart-has-rtscts; > + bluetooth { > + compatible = "nxp,iw416-bt"; Wrong indentation. Use 4 spaces for example indentation. Best regards, Krzysztof
On Mon, 13 Feb 2023 20:24:31 +0530, Neeraj Sanjay Kale wrote: > Add binding document for NXP bluetooth chipsets attached > over UART. > > Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com> > --- > v2: Resolved dt_binding_check errors. (Rob Herring) > v2: Modified description, added specific compatibility devices, corrected indentations. (Krzysztof Kozlowski) > v3: Modified description, renamed file (Krzysztof Kozlowski) > --- > .../bindings/net/bluetooth/nxp,w8xxx-bt.yaml | 44 +++++++++++++++++++ > MAINTAINERS | 7 +++ > 2 files changed, 51 insertions(+) > create mode 100644 Documentation/devicetree/bindings/net/bluetooth/nxp,w8xxx-bt.yaml > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13): yamllint warnings/errors: dtschema/dtc warnings/errors: ./Documentation/devicetree/bindings/net/bluetooth/nxp,w8xxx-bt.yaml: $id: relative path/filename doesn't match actual path or filename expected: http://devicetree.org/schemas/net/bluetooth/nxp,w8xxx-bt.yaml# doc reference errors (make refcheckdocs): MAINTAINERS: Documentation/devicetree/bindings/net/bluetooth/nxp-bluetooth.yaml See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20230213145432.1192911-3-neeraj.sanjaykale@nxp.com The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.
> -----Original Message----- > From: Neeraj sanjay kale <neeraj.sanjaykale@nxp.com> > Sent: 2023年2月13日 22:55 > To: davem@davemloft.net; edumazet@google.com; kuba@kernel.org; > pabeni@redhat.com; robh+dt@kernel.org; > krzysztof.kozlowski+dt@linaro.org; marcel@holtmann.org; > johan.hedberg@gmail.com; luiz.dentz@gmail.com; > gregkh@linuxfoundation.org; jirislaby@kernel.org; alok.a.tiwari@oracle.com; > hdanton@sina.com; ilpo.jarvinen@linux.intel.com; leon@kernel.org > Cc: netdev@vger.kernel.org; devicetree@vger.kernel.org; linux- > kernel@vger.kernel.org; linux-bluetooth@vger.kernel.org; linux- > serial@vger.kernel.org; Amitkumar Karwar <amitkumar.karwar@nxp.com>; > Rohit Fule <rohit.fule@nxp.com>; Sherry Sun <sherry.sun@nxp.com>; Neeraj > sanjay kale <neeraj.sanjaykale@nxp.com> > Subject: [PATCH v3 2/3] dt-bindings: net: bluetooth: Add NXP bluetooth > support > > Add binding document for NXP bluetooth chipsets attached over UART. > > Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com> > --- > v2: Resolved dt_binding_check errors. (Rob Herring) > v2: Modified description, added specific compatibility devices, corrected > indentations. (Krzysztof Kozlowski) > v3: Modified description, renamed file (Krzysztof Kozlowski) > --- > .../bindings/net/bluetooth/nxp,w8xxx-bt.yaml | 44 +++++++++++++++++++ > MAINTAINERS | 7 +++ > 2 files changed, 51 insertions(+) > create mode 100644 > Documentation/devicetree/bindings/net/bluetooth/nxp,w8xxx-bt.yaml > > diff --git a/Documentation/devicetree/bindings/net/bluetooth/nxp,w8xxx- > bt.yaml b/Documentation/devicetree/bindings/net/bluetooth/nxp,w8xxx- > bt.yaml > new file mode 100644 > index 000000000000..2685f6d5904f > --- /dev/null > +++ b/Documentation/devicetree/bindings/net/bluetooth/nxp,w8xxx- > bt.yaml > @@ -0,0 +1,44 @@ > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) %YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/net/bluetooth/nxp-bluetooth.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: NXP Bluetooth chips > + > +description: > + This binding describes UART-attached NXP bluetooth chips. > + These chips are dual-radio chips supporting WiFi and Bluetooth, > + except for iw612, which is a tri-radio chip supporting 15.4 > + as well. > + The bluetooth works on standard H4 protocol over 4-wire UART. > + The RTS and CTS lines are used during FW download. > + To enable power save mode, the host asserts break signal > + over UART-TX line to put the chip into power save state. > + De-asserting break wakes-up the BT chip. > + > +maintainers: > + - Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com> > + > +properties: > + compatible: > + enum: > + - nxp,88w8987-bt > + - nxp,88w8997-bt > + - nxp,88w9098-bt > + - nxp,iw416-bt > + - nxp,iw612-bt Hi Neeraj, No need to set one compatible for each NXP BT chip I think, otherwise the list will get longer and longer. You can use one common compatible for all the new BT chips which support V3 bootloader, then you will get the chip ID from the bootloader in driver to distinguish the chips. Best Regards Sherry > + > +required: > + - compatible > + > +additionalProperties: false > + > +examples: > + - | > + uart2 { > + uart-has-rtscts; > + bluetooth { > + compatible = "nxp,iw416-bt"; > + }; > + }; > diff --git a/MAINTAINERS b/MAINTAINERS > index 32dd41574930..211fc667c0ec 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -22835,6 +22835,13 @@ L: linux-mm@kvack.org > S: Maintained > F: mm/zswap.c > > +NXP BLUETOOTH WIRELESS DRIVERS > +M: Amitkumar Karwar <amitkumar.karwar@nxp.com> > +M: Neeraj Kale <neeraj.sanjaykale@nxp.com> > +S: Maintained > +F: Documentation/devicetree/bindings/net/bluetooth/nxp- > bluetooth.yaml > +F: drivers/bluetooth/btnxpuart* > + > THE REST > M: Linus Torvalds <torvalds@linux-foundation.org> > L: linux-kernel@vger.kernel.org > -- > 2.34.1
Hi Krzysztof, Thank you for reviewing this patch. I have fixed all the review comments in this document. Please let me know if you have any more comments or suggestions on the new v4 patch. > > .../bindings/net/bluetooth/nxp,w8xxx-bt.yaml | 44 > > +++++++++++++++++++ > > I don't think I proposed such filename. Renamed file to nxp,w8987-bt.yaml > > +examples: > > + - | > > + uart2 { > > This is a friendly reminder during the review process. > > It seems my previous comments were not fully addressed. Maybe my > feedback got lost between the quotes, maybe you just forgot to apply it. > Please go back to the previous discussion and either implement all requested > changes or keep discussing them. > > Thank you. > > > + uart-has-rtscts; > > + bluetooth { > > + compatible = "nxp,iw416-bt"; > > Wrong indentation. Use 4 spaces for example indentation. > Updated example indentation to use 4 spaces. Thanks, Neeraj
On 21/02/2023 17:40, Neeraj sanjay kale wrote: > Hi Krzysztof, > > Thank you for reviewing this patch. I have fixed all the review comments in this document. > Please let me know if you have any more comments or suggestions on the new v4 patch. > >>> .../bindings/net/bluetooth/nxp,w8xxx-bt.yaml | 44 >>> +++++++++++++++++++ >> >> I don't think I proposed such filename. > Renamed file to nxp,w8987-bt.yaml > > >>> +examples: >>> + - | >>> + uart2 { >> >> This is a friendly reminder during the review process. >> >> It seems my previous comments were not fully addressed. Maybe my >> feedback got lost between the quotes, maybe you just forgot to apply it. >> Please go back to the previous discussion and either implement all requested >> changes or keep discussing them. And how did you fix this one? Best regards, Krzysztof
diff --git a/Documentation/devicetree/bindings/net/bluetooth/nxp,w8xxx-bt.yaml b/Documentation/devicetree/bindings/net/bluetooth/nxp,w8xxx-bt.yaml new file mode 100644 index 000000000000..2685f6d5904f --- /dev/null +++ b/Documentation/devicetree/bindings/net/bluetooth/nxp,w8xxx-bt.yaml @@ -0,0 +1,44 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/bluetooth/nxp-bluetooth.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP Bluetooth chips + +description: + This binding describes UART-attached NXP bluetooth chips. + These chips are dual-radio chips supporting WiFi and Bluetooth, + except for iw612, which is a tri-radio chip supporting 15.4 + as well. + The bluetooth works on standard H4 protocol over 4-wire UART. + The RTS and CTS lines are used during FW download. + To enable power save mode, the host asserts break signal + over UART-TX line to put the chip into power save state. + De-asserting break wakes-up the BT chip. + +maintainers: + - Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com> + +properties: + compatible: + enum: + - nxp,88w8987-bt + - nxp,88w8997-bt + - nxp,88w9098-bt + - nxp,iw416-bt + - nxp,iw612-bt + +required: + - compatible + +additionalProperties: false + +examples: + - | + uart2 { + uart-has-rtscts; + bluetooth { + compatible = "nxp,iw416-bt"; + }; + }; diff --git a/MAINTAINERS b/MAINTAINERS index 32dd41574930..211fc667c0ec 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -22835,6 +22835,13 @@ L: linux-mm@kvack.org S: Maintained F: mm/zswap.c +NXP BLUETOOTH WIRELESS DRIVERS +M: Amitkumar Karwar <amitkumar.karwar@nxp.com> +M: Neeraj Kale <neeraj.sanjaykale@nxp.com> +S: Maintained +F: Documentation/devicetree/bindings/net/bluetooth/nxp-bluetooth.yaml +F: drivers/bluetooth/btnxpuart* + THE REST M: Linus Torvalds <torvalds@linux-foundation.org> L: linux-kernel@vger.kernel.org
Add binding document for NXP bluetooth chipsets attached over UART. Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com> --- v2: Resolved dt_binding_check errors. (Rob Herring) v2: Modified description, added specific compatibility devices, corrected indentations. (Krzysztof Kozlowski) v3: Modified description, renamed file (Krzysztof Kozlowski) --- .../bindings/net/bluetooth/nxp,w8xxx-bt.yaml | 44 +++++++++++++++++++ MAINTAINERS | 7 +++ 2 files changed, 51 insertions(+) create mode 100644 Documentation/devicetree/bindings/net/bluetooth/nxp,w8xxx-bt.yaml