diff mbox series

[v2,1/2] Bluetooth: btusb: mediatek: refactor btusb_mtk_reset function

Message ID 20240102124747.21644-1-hao.qin@mediatek.com (mailing list archive)
State New, archived
Headers show
Series [v2,1/2] Bluetooth: btusb: mediatek: refactor btusb_mtk_reset function | expand

Checks

Context Check Description
tedd_an/pre-ci_am success Success
tedd_an/CheckPatch success CheckPatch PASS
tedd_an/GitLint success Gitlint PASS
tedd_an/SubjectPrefix success Gitlint PASS
tedd_an/BuildKernel success BuildKernel PASS
tedd_an/CheckAllWarning success CheckAllWarning PASS
tedd_an/CheckSparse success CheckSparse PASS
tedd_an/CheckSmatch success CheckSparse PASS
tedd_an/BuildKernel32 success BuildKernel32 PASS
tedd_an/TestRunnerSetup success TestRunnerSetup PASS
tedd_an/TestRunner_l2cap-tester success TestRunner PASS
tedd_an/TestRunner_iso-tester success TestRunner PASS
tedd_an/TestRunner_bnep-tester success TestRunner PASS
tedd_an/TestRunner_mgmt-tester fail TestRunner_mgmt-tester: Total: 497, Passed: 495 (99.6%), Failed: 1, Not Run: 1
tedd_an/TestRunner_rfcomm-tester success TestRunner PASS
tedd_an/TestRunner_sco-tester success TestRunner PASS
tedd_an/TestRunner_ioctl-tester success TestRunner PASS
tedd_an/TestRunner_mesh-tester success TestRunner PASS
tedd_an/TestRunner_smp-tester success TestRunner PASS
tedd_an/TestRunner_userchan-tester success TestRunner PASS
tedd_an/IncrementalBuild success Incremental Build PASS

Commit Message

Hao Qin Jan. 2, 2024, 12:47 p.m. UTC 
From: "hao.qin" <hao.qin@mediatek.com>

Extract function btusb_mtk_subsys_reset from btusb_mtk_reset
for future handling of resetting bluetooth controller without
USB reset.

Signed-off-by: hao.qin <hao.qin@mediatek.com>

---
V1 -> V2: refactor btusb_mtk_reset function

Link:
  https://lore.kernel.org/all/20231215063714.7684-1-hao.qin@mediatek.com/
---
 drivers/bluetooth/btusb.c | 45 +++++++++++++++++++++++----------------
 1 file changed, 27 insertions(+), 18 deletions(-)

Comments

bluez.test.bot@gmail.com Jan. 2, 2024, 1:34 p.m. UTC | #1 
This is automated email and please do not reply to this email!

Dear submitter,

Thank you for submitting the patches to the linux bluetooth mailing list.
This is a CI test results with your patch series:
PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=813831

---Test result---

Test Summary:
CheckPatch                    PASS      1.20 seconds
GitLint                       PASS      0.68 seconds
SubjectPrefix                 PASS      0.23 seconds
BuildKernel                   PASS      28.23 seconds
CheckAllWarning               PASS      31.25 seconds
CheckSparse                   PASS      36.46 seconds
CheckSmatch                   PASS      99.93 seconds
BuildKernel32                 PASS      27.54 seconds
TestRunnerSetup               PASS      437.60 seconds
TestRunner_l2cap-tester       PASS      23.05 seconds
TestRunner_iso-tester         PASS      47.30 seconds
TestRunner_bnep-tester        PASS      6.85 seconds
TestRunner_mgmt-tester        FAIL      160.98 seconds
TestRunner_rfcomm-tester      PASS      10.80 seconds
TestRunner_sco-tester         PASS      14.39 seconds
TestRunner_ioctl-tester       PASS      12.03 seconds
TestRunner_mesh-tester        PASS      8.68 seconds
TestRunner_smp-tester         PASS      9.70 seconds
TestRunner_userchan-tester    PASS      7.10 seconds
IncrementalBuild              PASS      31.60 seconds

Details
##############################
Test: TestRunner_mgmt-tester - FAIL
Desc: Run mgmt-tester with test-runner
Output:
Total: 497, Passed: 495 (99.6%), Failed: 1, Not Run: 1

Failed Test Cases
LL Privacy - Start Discovery 2 (Disable RL)          Failed       0.269 seconds


---
Regards,
Linux Bluetooth
Sean Wang Feb. 3, 2024, 12:28 a.m. UTC | #2 
On Tue, Jan 2, 2024 at 6:49 AM Hao Qin <hao.qin@mediatek.com> wrote:
>
> From: "hao.qin" <hao.qin@mediatek.com>
>
> Extract function btusb_mtk_subsys_reset from btusb_mtk_reset
> for future handling of resetting bluetooth controller without
> USB reset.
>
> Signed-off-by: hao.qin <hao.qin@mediatek.com>
>

The patch doesn't modify any logic; it simply divides the existing
logic into two parts,
each prepared to be called in a specific context. Thus,  Acked-by:
Sean Wang <sean.wang@kernel.org>

> ---
> V1 -> V2: refactor btusb_mtk_reset function
>
> Link:
>   https://lore.kernel.org/all/20231215063714.7684-1-hao.qin@mediatek.com/
> ---
>  drivers/bluetooth/btusb.c | 45 +++++++++++++++++++++++----------------
>  1 file changed, 27 insertions(+), 18 deletions(-)
>
> diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
> index 0926e4451802..abefcd1a089d 100644
> --- a/drivers/bluetooth/btusb.c
> +++ b/drivers/bluetooth/btusb.c
> @@ -2994,28 +2994,13 @@ static u32 btusb_mtk_reset_done(struct hci_dev *hdev)
>         return val & MTK_BT_RST_DONE;
>  }
>
> -static int btusb_mtk_reset(struct hci_dev *hdev, void *rst_data)
> +static int btusb_mtk_subsys_reset(struct hci_dev *hdev, u32 dev_id)
>  {
>         struct btusb_data *data = hci_get_drvdata(hdev);
> -       struct btmediatek_data *mediatek;
>         u32 val;
>         int err;
>
> -       /* It's MediaTek specific bluetooth reset mechanism via USB */
> -       if (test_and_set_bit(BTUSB_HW_RESET_ACTIVE, &data->flags)) {
> -               bt_dev_err(hdev, "last reset failed? Not resetting again");
> -               return -EBUSY;
> -       }
> -
> -       err = usb_autopm_get_interface(data->intf);
> -       if (err < 0)
> -               return err;
> -
> -       btusb_stop_traffic(data);
> -       usb_kill_anchored_urbs(&data->tx_anchor);
> -       mediatek = hci_get_priv(hdev);
> -
> -       if (mediatek->dev_id == 0x7925) {
> +       if (dev_id == 0x7925) {
>                 btusb_mtk_uhw_reg_read(data, MTK_BT_RESET_REG_CONNV3, &val);
>                 val |= (1 << 5);
>                 btusb_mtk_uhw_reg_write(data, MTK_BT_RESET_REG_CONNV3, val);
> @@ -3059,8 +3044,32 @@ static int btusb_mtk_reset(struct hci_dev *hdev, void *rst_data)
>         if (!val)
>                 bt_dev_err(hdev, "Can't get device id, subsys reset fail.");
>
> -       usb_queue_reset_device(data->intf);
> +       return err;
> +}
>
> +static int btusb_mtk_reset(struct hci_dev *hdev, void *rst_data)
> +{
> +       struct btusb_data *data = hci_get_drvdata(hdev);
> +       struct btmediatek_data *mediatek;
> +       int err;
> +
> +       /* It's MediaTek specific bluetooth reset mechanism via USB */
> +       if (test_and_set_bit(BTUSB_HW_RESET_ACTIVE, &data->flags)) {
> +               bt_dev_err(hdev, "last reset failed? Not resetting again");
> +               return -EBUSY;
> +       }
> +
> +       err = usb_autopm_get_interface(data->intf);
> +       if (err < 0)
> +               return err;
> +
> +       btusb_stop_traffic(data);
> +       usb_kill_anchored_urbs(&data->tx_anchor);
> +       mediatek = hci_get_priv(hdev);
> +
> +       err = btusb_mtk_subsys_reset(hdev, mediatek->dev_id);
> +
> +       usb_queue_reset_device(data->intf);
>         clear_bit(BTUSB_HW_RESET_ACTIVE, &data->flags);
>
>         return err;
> --
> 2.18.0
>
>
diff mbox series

Patch

diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 0926e4451802..abefcd1a089d 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -2994,28 +2994,13 @@  static u32 btusb_mtk_reset_done(struct hci_dev *hdev)
 	return val & MTK_BT_RST_DONE;
 }
 
-static int btusb_mtk_reset(struct hci_dev *hdev, void *rst_data)
+static int btusb_mtk_subsys_reset(struct hci_dev *hdev, u32 dev_id)
 {
 	struct btusb_data *data = hci_get_drvdata(hdev);
-	struct btmediatek_data *mediatek;
 	u32 val;
 	int err;
 
-	/* It's MediaTek specific bluetooth reset mechanism via USB */
-	if (test_and_set_bit(BTUSB_HW_RESET_ACTIVE, &data->flags)) {
-		bt_dev_err(hdev, "last reset failed? Not resetting again");
-		return -EBUSY;
-	}
-
-	err = usb_autopm_get_interface(data->intf);
-	if (err < 0)
-		return err;
-
-	btusb_stop_traffic(data);
-	usb_kill_anchored_urbs(&data->tx_anchor);
-	mediatek = hci_get_priv(hdev);
-
-	if (mediatek->dev_id == 0x7925) {
+	if (dev_id == 0x7925) {
 		btusb_mtk_uhw_reg_read(data, MTK_BT_RESET_REG_CONNV3, &val);
 		val |= (1 << 5);
 		btusb_mtk_uhw_reg_write(data, MTK_BT_RESET_REG_CONNV3, val);
@@ -3059,8 +3044,32 @@  static int btusb_mtk_reset(struct hci_dev *hdev, void *rst_data)
 	if (!val)
 		bt_dev_err(hdev, "Can't get device id, subsys reset fail.");
 
-	usb_queue_reset_device(data->intf);
+	return err;
+}
 
+static int btusb_mtk_reset(struct hci_dev *hdev, void *rst_data)
+{
+	struct btusb_data *data = hci_get_drvdata(hdev);
+	struct btmediatek_data *mediatek;
+	int err;
+
+	/* It's MediaTek specific bluetooth reset mechanism via USB */
+	if (test_and_set_bit(BTUSB_HW_RESET_ACTIVE, &data->flags)) {
+		bt_dev_err(hdev, "last reset failed? Not resetting again");
+		return -EBUSY;
+	}
+
+	err = usb_autopm_get_interface(data->intf);
+	if (err < 0)
+		return err;
+
+	btusb_stop_traffic(data);
+	usb_kill_anchored_urbs(&data->tx_anchor);
+	mediatek = hci_get_priv(hdev);
+
+	err = btusb_mtk_subsys_reset(hdev, mediatek->dev_id);
+
+	usb_queue_reset_device(data->intf);
 	clear_bit(BTUSB_HW_RESET_ACTIVE, &data->flags);
 
 	return err;