diff mbox series

[v4,3/4] Bluetooth: hci_conn: Only do ACL connections sequentially

Message ID 20240109174928.488595-3-luiz.dentz@gmail.com (mailing list archive)
State New, archived
Headers show
Series [v4,1/4] Bluetooth: Remove superfluous call to hci_conn_check_pending() | expand

Checks

Context Check Description
tedd_an/pre-ci_am success Success
tedd_an/CheckPatch warning WARNING: 'firware' may be misspelled - perhaps 'firmware'? #84: requests in the firware. ^^^^^^^ total: 0 errors, 1 warnings, 0 checks, 181 lines checked NOTE: For some of the reported defects, checkpatch may be able to mechanically convert to the typical style using --fix or --fix-inplace. /github/workspace/src/src/13515173.patch has style problems, please review. NOTE: Ignored message types: UNKNOWN_COMMIT_ID NOTE: If any of the errors are false positives, please report them to the maintainer, see CHECKPATCH in MAINTAINERS.
tedd_an/GitLint success Gitlint PASS
tedd_an/SubjectPrefix success Gitlint PASS
tedd_an/IncrementalBuild success Incremental Build PASS

Commit Message

Luiz Augusto von Dentz Jan. 9, 2024, 5:49 p.m. UTC
From: Jonas Dreßler <verdre@v0yd.nl>

Pretty much all bluetooth chipsets only support paging a single device at
a time, and if they don't reject a secondary "Create Connection" request
while another is still ongoing, they'll most likely serialize those
requests in the firware.

With commit 4c67bc74f016 ("[Bluetooth] Support concurrent connect
requests") we started adding some serialization of our own in case the
adapter returns "Command Disallowed" HCI error.

This commit was using the BT_CONNECT2 state for the serialization, this
state is also used for a few more things (most notably to indicate we're
waiting for an inquiry to cancel) and therefore a bit unreliable. Also
not all BT firwares would respond with "Command Disallowed" on too many
connection requests, some will also respond with "Hardware Failure"
(BCM4378), and others will error out later and send a "Connect Complete"
event with error "Rejected Limited Resources" (Marvell 88W8897).

We can clean things up a bit and also make the serialization more reliable
by using our hci_sync machinery to always do "Create Connection" requests
in a sequential manner.

This is very similar to what we're already doing for establishing LE
connections, and it works well there.

Signed-off-by: Jonas Dreßler <verdre@v0yd.nl>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
---
 include/net/bluetooth/hci.h      |  1 +
 include/net/bluetooth/hci_sync.h |  4 ++
 net/bluetooth/hci_conn.c         | 69 ++++-------------------------
 net/bluetooth/hci_sync.c         | 74 ++++++++++++++++++++++++++++++++
 4 files changed, 88 insertions(+), 60 deletions(-)
diff mbox series

Patch

diff --git a/include/net/bluetooth/hci.h b/include/net/bluetooth/hci.h
index 1cd212bb3789..0be0c1af7e74 100644
--- a/include/net/bluetooth/hci.h
+++ b/include/net/bluetooth/hci.h
@@ -439,6 +439,7 @@  enum {
 #define HCI_ACL_TX_TIMEOUT	msecs_to_jiffies(45000)	/* 45 seconds */
 #define HCI_AUTO_OFF_TIMEOUT	msecs_to_jiffies(2000)	/* 2 seconds */
 #define HCI_LE_CONN_TIMEOUT	msecs_to_jiffies(20000)	/* 20 seconds */
+#define HCI_ACL_CONN_TIMEOUT	msecs_to_jiffies(20000)	/* 20 seconds */
 #define HCI_LE_AUTOCONN_TIMEOUT	msecs_to_jiffies(4000)	/* 4 seconds */
 
 /* HCI data types */
diff --git a/include/net/bluetooth/hci_sync.h b/include/net/bluetooth/hci_sync.h
index 6efbc2152146..18f022f2a978 100644
--- a/include/net/bluetooth/hci_sync.h
+++ b/include/net/bluetooth/hci_sync.h
@@ -138,3 +138,7 @@  int hci_le_terminate_big_sync(struct hci_dev *hdev, u8 handle, u8 reason);
 int hci_le_big_terminate_sync(struct hci_dev *hdev, u8 handle);
 
 int hci_le_pa_terminate_sync(struct hci_dev *hdev, u16 handle);
+
+int hci_acl_create_conn_sync(struct hci_dev *hdev, struct hci_conn *conn);
+
+int hci_acl_create_conn(struct hci_dev *hdev, struct hci_conn *conn);
diff --git a/net/bluetooth/hci_conn.c b/net/bluetooth/hci_conn.c
index a41d2693f4d8..8d2c2751455e 100644
--- a/net/bluetooth/hci_conn.c
+++ b/net/bluetooth/hci_conn.c
@@ -179,64 +179,6 @@  static void hci_conn_cleanup(struct hci_conn *conn)
 	hci_dev_put(hdev);
 }
 
-static void hci_acl_create_connection(struct hci_conn *conn)
-{
-	struct hci_dev *hdev = conn->hdev;
-	struct inquiry_entry *ie;
-	struct hci_cp_create_conn cp;
-
-	BT_DBG("hcon %p", conn);
-
-	/* Many controllers disallow HCI Create Connection while it is doing
-	 * HCI Inquiry. So we cancel the Inquiry first before issuing HCI Create
-	 * Connection. This may cause the MGMT discovering state to become false
-	 * without user space's request but it is okay since the MGMT Discovery
-	 * APIs do not promise that discovery should be done forever. Instead,
-	 * the user space monitors the status of MGMT discovering and it may
-	 * request for discovery again when this flag becomes false.
-	 */
-	if (test_bit(HCI_INQUIRY, &hdev->flags)) {
-		/* Put this connection to "pending" state so that it will be
-		 * executed after the inquiry cancel command complete event.
-		 */
-		conn->state = BT_CONNECT2;
-		hci_send_cmd(hdev, HCI_OP_INQUIRY_CANCEL, 0, NULL);
-		return;
-	}
-
-	conn->state = BT_CONNECT;
-	conn->out = true;
-	conn->role = HCI_ROLE_MASTER;
-
-	conn->attempt++;
-
-	conn->link_policy = hdev->link_policy;
-
-	memset(&cp, 0, sizeof(cp));
-	bacpy(&cp.bdaddr, &conn->dst);
-	cp.pscan_rep_mode = 0x02;
-
-	ie = hci_inquiry_cache_lookup(hdev, &conn->dst);
-	if (ie) {
-		if (inquiry_entry_age(ie) <= INQUIRY_ENTRY_AGE_MAX) {
-			cp.pscan_rep_mode = ie->data.pscan_rep_mode;
-			cp.pscan_mode     = ie->data.pscan_mode;
-			cp.clock_offset   = ie->data.clock_offset |
-					    cpu_to_le16(0x8000);
-		}
-
-		memcpy(conn->dev_class, ie->data.dev_class, 3);
-	}
-
-	cp.pkt_type = cpu_to_le16(conn->pkt_type);
-	if (lmp_rswitch_capable(hdev) && !(hdev->link_mode & HCI_LM_MASTER))
-		cp.role_switch = 0x01;
-	else
-		cp.role_switch = 0x00;
-
-	hci_send_cmd(hdev, HCI_OP_CREATE_CONN, sizeof(cp), &cp);
-}
-
 int hci_disconnect(struct hci_conn *conn, __u8 reason)
 {
 	BT_DBG("hcon %p", conn);
@@ -1700,10 +1642,17 @@  struct hci_conn *hci_connect_acl(struct hci_dev *hdev, bdaddr_t *dst,
 
 	acl->conn_reason = conn_reason;
 	if (acl->state == BT_OPEN || acl->state == BT_CLOSED) {
+		int err;
+
 		acl->sec_level = BT_SECURITY_LOW;
 		acl->pending_sec_level = sec_level;
 		acl->auth_type = auth_type;
-		hci_acl_create_connection(acl);
+
+		err = hci_acl_create_conn(hdev, acl);
+		if (err) {
+			hci_conn_del(acl);
+			return ERR_PTR(err);
+		}
 	}
 
 	return acl;
@@ -2658,7 +2607,7 @@  void hci_conn_check_pending(struct hci_dev *hdev)
 
 	conn = hci_conn_hash_lookup_state(hdev, ACL_LINK, BT_CONNECT2);
 	if (conn)
-		hci_acl_create_connection(conn);
+		hci_acl_create_conn(hdev, conn);
 
 	hci_dev_unlock(hdev);
 }
diff --git a/net/bluetooth/hci_sync.c b/net/bluetooth/hci_sync.c
index b146562a65fc..3d434e9d2a15 100644
--- a/net/bluetooth/hci_sync.c
+++ b/net/bluetooth/hci_sync.c
@@ -6490,3 +6490,77 @@  int hci_update_adv_data(struct hci_dev *hdev, u8 instance)
 	return hci_cmd_sync_queue(hdev, _update_adv_data_sync,
 				  UINT_PTR(instance), NULL);
 }
+
+int hci_acl_create_conn_sync(struct hci_dev *hdev, struct hci_conn *conn)
+{
+	struct inquiry_entry *ie;
+	struct hci_cp_create_conn cp;
+	int err;
+
+	BT_DBG("hcon %p", conn);
+
+	/* Many controllers disallow HCI Create Connection while it is doing
+	 * HCI Inquiry. So we cancel the Inquiry first before issuing HCI Create
+	 * Connection. This may cause the MGMT discovering state to become false
+	 * without user space's request but it is okay since the MGMT Discovery
+	 * APIs do not promise that discovery should be done forever. Instead,
+	 * the user space monitors the status of MGMT discovering and it may
+	 * request for discovery again when this flag becomes false.
+	 */
+	if (test_bit(HCI_INQUIRY, &hdev->flags)) {
+		err = __hci_cmd_sync_status(hdev, HCI_OP_INQUIRY_CANCEL, 0,
+					    NULL, HCI_CMD_TIMEOUT);
+		if (err)
+			bt_dev_warn(hdev, "Failed to cancel inquiry %d", err);
+	}
+
+	conn->state = BT_CONNECT;
+	conn->out = true;
+	conn->role = HCI_ROLE_MASTER;
+
+	conn->attempt++;
+
+	conn->link_policy = hdev->link_policy;
+
+	memset(&cp, 0, sizeof(cp));
+	bacpy(&cp.bdaddr, &conn->dst);
+	cp.pscan_rep_mode = 0x02;
+
+	ie = hci_inquiry_cache_lookup(hdev, &conn->dst);
+	if (ie) {
+		if (inquiry_entry_age(ie) <= INQUIRY_ENTRY_AGE_MAX) {
+			cp.pscan_rep_mode = ie->data.pscan_rep_mode;
+			cp.pscan_mode     = ie->data.pscan_mode;
+			cp.clock_offset   = ie->data.clock_offset |
+					    cpu_to_le16(0x8000);
+		}
+
+		memcpy(conn->dev_class, ie->data.dev_class, 3);
+	}
+
+	cp.pkt_type = cpu_to_le16(conn->pkt_type);
+	if (lmp_rswitch_capable(hdev) && !(hdev->link_mode & HCI_LM_MASTER))
+		cp.role_switch = 0x01;
+	else
+		cp.role_switch = 0x00;
+
+	err = __hci_cmd_sync_status_sk(hdev, HCI_OP_CREATE_CONN,
+				       sizeof(cp), &cp,
+				       HCI_EV_CONN_COMPLETE,
+				       HCI_ACL_CONN_TIMEOUT, NULL);
+
+	if (err == -ETIMEDOUT)
+		hci_abort_conn_sync(hdev, conn, HCI_ERROR_LOCAL_HOST_TERM);
+
+	return err;
+}
+
+static int acl_create_conn_sync(struct hci_dev *hdev, void *data)
+{
+	return hci_acl_create_conn_sync(hdev, data);
+}
+
+int hci_acl_create_conn(struct hci_dev *hdev, struct hci_conn *conn)
+{
+	return hci_cmd_sync_queue(hdev, acl_create_conn_sync, conn, NULL);
+}