diff mbox series

Bluetooth: btrtl: Add the support for RTL8922A

Message ID 20240312065441.31883-1-max.chou@realtek.com (mailing list archive)
State Superseded
Headers show
Series Bluetooth: btrtl: Add the support for RTL8922A | expand

Checks

Context Check Description
tedd_an/pre-ci_am success Success
tedd_an/CheckPatch success CheckPatch PASS
tedd_an/GitLint success Gitlint PASS
tedd_an/SubjectPrefix success Gitlint PASS
tedd_an/BuildKernel success BuildKernel PASS
tedd_an/CheckAllWarning success CheckAllWarning PASS
tedd_an/CheckSparse success CheckSparse PASS
tedd_an/CheckSmatch success CheckSparse PASS
tedd_an/BuildKernel32 success BuildKernel32 PASS
tedd_an/TestRunnerSetup success TestRunnerSetup PASS
tedd_an/TestRunner_l2cap-tester success TestRunner PASS
tedd_an/TestRunner_iso-tester fail TestRunner_iso-tester: Total: 117, Passed: 116 (99.1%), Failed: 1, Not Run: 0
tedd_an/TestRunner_bnep-tester success TestRunner PASS
tedd_an/TestRunner_mgmt-tester fail TestRunner_mgmt-tester: Total: 492, Passed: 488 (99.2%), Failed: 2, Not Run: 2
tedd_an/TestRunner_rfcomm-tester success TestRunner PASS
tedd_an/TestRunner_sco-tester success TestRunner PASS
tedd_an/TestRunner_ioctl-tester success TestRunner PASS
tedd_an/TestRunner_mesh-tester success TestRunner PASS
tedd_an/TestRunner_smp-tester success TestRunner PASS
tedd_an/TestRunner_userchan-tester success TestRunner PASS
tedd_an/IncrementalBuild success Incremental Build PASS

Commit Message

Max Chou March 12, 2024, 6:54 a.m. UTC 
From: Max Chou <max.chou@realtek.com>

Add the support for RTL8922A BT controller on USB interface.
The necessary firmware will be submitted to linux-firmware project.

The device info from /sys/kernel/debug/usb/devices as below.

T:  Bus=01 Lev=02 Prnt=02 Port=02 Cnt=01 Dev#=  3 Spd=12   MxCh= 0
D:  Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=0bda ProdID=8922 Rev= 0.00
S:  Manufacturer=Realtek
S:  Product=Bluetooth Radio
S:  SerialNumber=00E04C885A01
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
I:  If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
E:  Ad=03(O) Atr=01(Isoc) MxPS=  63 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  63 Ivl=1ms

Signed-off-by: Max Chou <max.chou@realtek.com>
---
 drivers/bluetooth/btrtl.c | 16 ++++++++++++++++
 drivers/bluetooth/btusb.c | 11 +++++++++++
 2 files changed, 27 insertions(+)

Comments

bluez.test.bot@gmail.com March 12, 2024, 7:32 a.m. UTC | #1 
This is automated email and please do not reply to this email!

Dear submitter,

Thank you for submitting the patches to the linux bluetooth mailing list.
This is a CI test results with your patch series:
PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=834535

---Test result---

Test Summary:
CheckPatch                    PASS      0.87 seconds
GitLint                       PASS      0.32 seconds
SubjectPrefix                 PASS      0.14 seconds
BuildKernel                   PASS      29.60 seconds
CheckAllWarning               PASS      32.26 seconds
CheckSparse                   PASS      38.07 seconds
CheckSmatch                   PASS      102.82 seconds
BuildKernel32                 PASS      28.33 seconds
TestRunnerSetup               PASS      532.35 seconds
TestRunner_l2cap-tester       PASS      20.38 seconds
TestRunner_iso-tester         FAIL      33.38 seconds
TestRunner_bnep-tester        PASS      5.00 seconds
TestRunner_mgmt-tester        FAIL      116.66 seconds
TestRunner_rfcomm-tester      PASS      7.54 seconds
TestRunner_sco-tester         PASS      15.06 seconds
TestRunner_ioctl-tester       PASS      8.01 seconds
TestRunner_mesh-tester        PASS      6.03 seconds
TestRunner_smp-tester         PASS      7.03 seconds
TestRunner_userchan-tester    PASS      5.16 seconds
IncrementalBuild              PASS      27.30 seconds

Details
##############################
Test: TestRunner_iso-tester - FAIL
Desc: Run iso-tester with test-runner
Output:
Total: 117, Passed: 116 (99.1%), Failed: 1, Not Run: 0

Failed Test Cases
ISO Connect Suspend - Success                        Failed       4.188 seconds
##############################
Test: TestRunner_mgmt-tester - FAIL
Desc: Run mgmt-tester with test-runner
Output:
Total: 492, Passed: 488 (99.2%), Failed: 2, Not Run: 2

Failed Test Cases
LL Privacy - Add Device 7 (AL is full)               Failed       0.199 seconds
LL Privacy - Remove Device 4 (Disable Adv)           Timed out    2.138 seconds


---
Regards,
Linux Bluetooth
diff mbox series

Patch

diff --git a/drivers/bluetooth/btrtl.c b/drivers/bluetooth/btrtl.c
index cc50de69e8dc..51a2d459cf6d 100644
--- a/drivers/bluetooth/btrtl.c
+++ b/drivers/bluetooth/btrtl.c
@@ -30,6 +30,7 @@ 
 #define RTL_ROM_LMP_8822B	0x8822
 #define RTL_ROM_LMP_8852A	0x8852
 #define RTL_ROM_LMP_8851B	0x8851
+#define RTL_ROM_LMP_8922A	0x8922
 #define RTL_CONFIG_MAGIC	0x8723ab55
 
 #define RTL_VSC_OP_COREDUMP	0xfcff
@@ -69,6 +70,7 @@  enum btrtl_chip_id {
 	CHIP_ID_8852B = 20,
 	CHIP_ID_8852C = 25,
 	CHIP_ID_8851B = 36,
+	CHIP_ID_8922A = 44,
 	CHIP_ID_8852BT = 47,
 };
 
@@ -309,6 +311,15 @@  static const struct id_table ic_id_table[] = {
 	  .cfg_name = "rtl_bt/rtl8851bu_config",
 	  .hw_info  = "rtl8851bu" },
 
+	/* 8922A */
+	{ IC_INFO(RTL_ROM_LMP_8922A, 0xa, 0xc, HCI_USB),
+	  .config_needed = false,
+	  .has_rom_version = true,
+	  .has_msft_ext = true,
+	  .fw_name  = "rtl_bt/rtl8922au_fw",
+	  .cfg_name = "rtl_bt/rtl8922au_config",
+	  .hw_info  = "rtl8922au" },
+
 	/* 8852BT/8852BE-VT */
 	{ IC_INFO(RTL_ROM_LMP_8852A, 0x87, 0xc, HCI_USB),
 	  .config_needed = false,
@@ -655,6 +666,7 @@  static int rtlbt_parse_firmware(struct hci_dev *hdev,
 		{ RTL_ROM_LMP_8852A, 20 },	/* 8852B */
 		{ RTL_ROM_LMP_8852A, 25 },	/* 8852C */
 		{ RTL_ROM_LMP_8851B, 36 },	/* 8851B */
+		{ RTL_ROM_LMP_8922A, 44 },	/* 8922A */
 		{ RTL_ROM_LMP_8852A, 47 },	/* 8852BT */
 	};
 
@@ -1255,6 +1267,7 @@  int btrtl_download_firmware(struct hci_dev *hdev,
 	case RTL_ROM_LMP_8852A:
 	case RTL_ROM_LMP_8703B:
 	case RTL_ROM_LMP_8851B:
+	case RTL_ROM_LMP_8922A:
 		err = btrtl_setup_rtl8723b(hdev, btrtl_dev);
 		break;
 	default:
@@ -1286,6 +1299,7 @@  void btrtl_set_quirks(struct hci_dev *hdev, struct btrtl_device_info *btrtl_dev)
 	case CHIP_ID_8852B:
 	case CHIP_ID_8852C:
 	case CHIP_ID_8851B:
+	case CHIP_ID_8922A:
 	case CHIP_ID_8852BT:
 		set_bit(HCI_QUIRK_VALID_LE_STATES, &hdev->quirks);
 		set_bit(HCI_QUIRK_WIDEBAND_SPEECH_SUPPORTED, &hdev->quirks);
@@ -1522,3 +1536,5 @@  MODULE_FIRMWARE("rtl_bt/rtl8852btu_config.bin");
 MODULE_FIRMWARE("rtl_bt/rtl8852cu_fw.bin");
 MODULE_FIRMWARE("rtl_bt/rtl8852cu_fw_v2.bin");
 MODULE_FIRMWARE("rtl_bt/rtl8852cu_config.bin");
+MODULE_FIRMWARE("rtl_bt/rtl8922au_fw.bin");
+MODULE_FIRMWARE("rtl_bt/rtl8922au_config.bin");
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 06e915b57283..d4aa9a84979b 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -556,6 +556,17 @@  static const struct usb_device_id quirks_table[] = {
 	/* Realtek 8852BT/8852BE-VT Bluetooth devices */
 	{ USB_DEVICE(0x0bda, 0x8520), .driver_info = BTUSB_REALTEK |
 						     BTUSB_WIDEBAND_SPEECH },
+
+	/* Realtek 8922AE Bluetooth devices */
+	{ USB_DEVICE(0x0bda, 0x8922), .driver_info = BTUSB_REALTEK |
+						     BTUSB_WIDEBAND_SPEECH },
+	{ USB_DEVICE(0x13d3, 0x3617), .driver_info = BTUSB_REALTEK |
+						     BTUSB_WIDEBAND_SPEECH },
+	{ USB_DEVICE(0x13d3, 0x3616), .driver_info = BTUSB_REALTEK |
+						     BTUSB_WIDEBAND_SPEECH },
+	{ USB_DEVICE(0x0489, 0xe130), .driver_info = BTUSB_REALTEK |
+						     BTUSB_WIDEBAND_SPEECH },
+
 	/* Realtek Bluetooth devices */
 	{ USB_VENDOR_AND_INTERFACE_INFO(0x0bda, 0xe0, 0x01, 0x01),
 	  .driver_info = BTUSB_REALTEK },