[next,v2,1/2] dt-bindings: net: bluetooth: nxp: add support for supply and reset

Commit Message

POPESCU Catalin Feb. 27, 2025, 10:57 a.m. UTC

Add support for chip power supply and chip reset/powerdown.

Signed-off-by: Catalin Popescu <[e-mail]>
Acked-by: Conor Dooley <[e-mail]>
---
v2:
- rebase on linux-next tag next-20250227
- add acked-by
---
 .../bindings/net/bluetooth/nxp,88w8987-bt.yaml         | 10 ++++++++++
 1 file changed, 10 insertions(+)


base-commit: be5c7bbb3a64baf884481a1ba0c2f8fb2f93f7c3

Comments

[e-mail] Feb. 27, 2025, 11:30 a.m. UTC | #1

This is automated email and please do not reply to this email!

Dear submitter,

Thank you for submitting the patches to the linux bluetooth mailing list.
This is a CI test results with your patch series:
PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=938443

---Test result---

Test Summary:
CheckPatch                    PENDING   0.24 seconds
GitLint                       PENDING   0.26 seconds
SubjectPrefix                 FAIL      0.43 seconds
BuildKernel                   PASS      24.23 seconds
CheckAllWarning               PASS      26.36 seconds
CheckSparse                   PASS      30.67 seconds
BuildKernel32                 PASS      24.13 seconds
TestRunnerSetup               PASS      428.32 seconds
TestRunner_l2cap-tester       PASS      20.95 seconds
TestRunner_iso-tester         PASS      36.17 seconds
TestRunner_bnep-tester        PASS      4.83 seconds
TestRunner_mgmt-tester        FAIL      120.63 seconds
TestRunner_rfcomm-tester      PASS      7.94 seconds
TestRunner_sco-tester         PASS      9.67 seconds
TestRunner_ioctl-tester       PASS      8.36 seconds
TestRunner_mesh-tester        PASS      6.07 seconds
TestRunner_smp-tester         PASS      7.27 seconds
TestRunner_userchan-tester    PASS      5.05 seconds
IncrementalBuild              PENDING   0.56 seconds

Details
##############################
Test: CheckPatch - PENDING
Desc: Run checkpatch.pl script
Output:

##############################
Test: GitLint - PENDING
Desc: Run gitlint
Output:

##############################
Test: SubjectPrefix - FAIL
Desc: Check subject contains "Bluetooth" prefix
Output:
"Bluetooth: " prefix is not specified in the subject
"Bluetooth: " prefix is not specified in the subject
##############################
Test: TestRunner_mgmt-tester - FAIL
Desc: Run mgmt-tester with test-runner
Output:
Total: 490, Passed: 484 (98.8%), Failed: 2, Not Run: 4

Failed Test Cases
LL Privacy - Start Discovery 1 (Disable RL)          Failed       0.174 seconds
LL Privacy - Set Device Flag 1 (Device Privacy)      Failed       0.158 seconds
##############################
Test: IncrementalBuild - PENDING
Desc: Incremental build with the patches in the series
Output:



---
Regards,
Linux Bluetooth

Patch

diff --git a/Documentation/devicetree/bindings/net/bluetooth/nxp,88w8987-bt.yaml b/Documentation/devicetree/bindings/net/bluetooth/nxp,88w8987-bt.yaml
index 04f55fac42ce..97c694f2d70a 100644
--- a/Documentation/devicetree/bindings/net/bluetooth/nxp,88w8987-bt.yaml
+++ b/Documentation/devicetree/bindings/net/bluetooth/nxp,88w8987-bt.yaml
@@ -50,6 +50,14 @@  properties:
     description:
       The GPIO number of the NXP chipset used for BT_WAKE_OUT.
 
+  vcc-supply:
+    description:
+      phandle of the regulator that provides the supply voltage.
+
+  reset-gpios:
+    description:
+      Chip powerdown/reset signal (PDn).
+
 required:
   - compatible
 
@@ -66,5 +74,7 @@  examples:
             device-wakeup-gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
             nxp,wakein-pin = /bits/ 8 <18>;
             nxp,wakeout-pin = /bits/ 8 <19>;
+            vcc-supply = <&nxp_iw612_supply>;
+            reset-gpios = <&gpioctrl 2 GPIO_ACTIVE_LOW>;
         };
     };