diff mbox series

[2/2] Bluetooth: btmtksdio: fix possible FW initialization failure

Message ID 8ff7aed526e70f8cd05a019e94976d48992b4445.1652390894.git.objelf@gmail.com (mailing list archive)
State Accepted
Commit 7469720563e01f479ec5afe06bd6f440f965d523
Headers show
Series [1/2] Bluetooth: btmtksdio: fix the reset takes too long | expand

Checks

Context Check Description
tedd_an/pre-ci_am success Success
tedd_an/checkpatch success Checkpatch PASS
tedd_an/gitlint success Gitlint PASS
tedd_an/subjectprefix success PASS

Commit Message

Sean Wang May 12, 2022, 9:38 p.m. UTC 
From: Sean Wang <sean.wang@mediatek.com>

According to FW advised sequence, mt7921s need to re-acquire privilege
immediately after the firmware download is complete before normal running.
Otherwise, it is still possible the bus may be stuck in an abnormal status
that causes FW initialization failure in the current driver.

Fixes: 752aea58489f ("Bluetooth: mt7921s: fix bus hang with wrong privilege")
Co-developed-by: Yake Yang <yake.yang@mediatek.com>
Signed-off-by: Yake Yang <yake.yang@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
---
 drivers/bluetooth/btmtksdio.c | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)
diff mbox series

Patch

diff --git a/drivers/bluetooth/btmtksdio.c b/drivers/bluetooth/btmtksdio.c
index 26e27fd79a21..d6700efcfe8c 100644
--- a/drivers/bluetooth/btmtksdio.c
+++ b/drivers/bluetooth/btmtksdio.c
@@ -864,6 +864,14 @@  static int mt79xx_setup(struct hci_dev *hdev, const char *fwname)
 		return err;
 	}
 
+	err = btmtksdio_fw_pmctrl(bdev);
+	if (err < 0)
+		return err;
+
+	err = btmtksdio_drv_pmctrl(bdev);
+	if (err < 0)
+		return err;
+
 	/* Enable Bluetooth protocol */
 	wmt_params.op = BTMTK_WMT_FUNC_CTRL;
 	wmt_params.flag = 0;
@@ -1109,14 +1117,6 @@  static int btmtksdio_setup(struct hci_dev *hdev)
 		if (err < 0)
 			return err;
 
-		err = btmtksdio_fw_pmctrl(bdev);
-		if (err < 0)
-			return err;
-
-		err = btmtksdio_drv_pmctrl(bdev);
-		if (err < 0)
-			return err;
-
 		/* Enable SCO over I2S/PCM */
 		err = btmtksdio_sco_setting(hdev);
 		if (err < 0) {