@@ -3120,18 +3120,17 @@ static int set_aif_sample_format(struct snd_soc_component *component,
unsigned int width;
int ret;
- switch (format) {
- case SNDRV_PCM_FORMAT_S16_LE:
+ switch (snd_pcm_format_width(format)) {
+ case 16:
width = FV_WL_16;
break;
- case SNDRV_PCM_FORMAT_S20_3LE:
+ case 20:
width = FV_WL_20;
break;
- case SNDRV_PCM_FORMAT_S24_3LE:
+ case 24:
width = FV_WL_24;
break;
- case SNDRV_PCM_FORMAT_S24_LE:
- case SNDRV_PCM_FORMAT_S32_LE:
+ case 32:
width = FV_WL_32;
break;
default:
@@ -3326,6 +3325,7 @@ static const struct snd_soc_component_driver soc_component_dev_tscs454 = {
.num_dapm_routes = ARRAY_SIZE(tscs454_intercon),
.controls = tscs454_snd_controls,
.num_controls = ARRAY_SIZE(tscs454_snd_controls),
+ .endianness = 1,
};
#define TSCS454_RATES SNDRV_PCM_RATE_8000_96000
The endianness flag is used on the CODEC side to specify an ambivalence to endian, typically because it is lost over the hardware link. This device receives audio over an I2S DAI and as such should have endianness applied. A fixup is also required to use the width directly rather than relying on the format in hw_params, now both little and big endian would be supported. It is worth noting this changes the behaviour of S24_LE to use a word length of 24 rather than 32. This would appear to be a correction since the fact S24_LE is stored as 32 bits should not be presented over the bus. Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> --- sound/soc/codecs/tscs454.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-)