@@ -14,6 +14,7 @@ touchscreen2: touchscreen@34 {
compatible = "melfas,mip4_ts";
reg = <0x34>;
interrupts-extended = <&pio 88 IRQ_TYPE_LEVEL_LOW>;
+ status = "fail-needs-probe";
};
/*
@@ -26,6 +27,7 @@ touchscreen3: touchscreen@20 {
reg = <0x20>;
hid-descr-addr = <0x0020>;
interrupts-extended = <&pio 88 IRQ_TYPE_LEVEL_LOW>;
+ status = "fail-needs-probe";
};
/* Lenovo Ideapad C330 uses G2Touch touchscreen as a 2nd source touchscreen */
@@ -35,6 +37,7 @@ touchscreen@40 {
hid-descr-addr = <0x0001>;
interrupt-parent = <&pio>;
interrupts = <88 IRQ_TYPE_LEVEL_LOW>;
+ status = "fail-needs-probe";
};
};
@@ -47,6 +50,8 @@ &i2c4 {
trackpad2: trackpad@2c {
compatible = "hid-over-i2c";
interrupts-extended = <&pio 117 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&trackpad_irq>;
reg = <0x2c>;
hid-descr-addr = <0x0020>;
/*
@@ -56,6 +61,7 @@ trackpad2: trackpad@2c {
/* post-power-on-delay-ms = <100>; */
vdd-supply = <&mt6397_vgp6_reg>;
wakeup-source;
+ status = "fail-needs-probe";
};
};
@@ -80,3 +86,11 @@ pins_wp {
};
};
};
+
+&touchscreen {
+ status = "fail-needs-probe";
+};
+
+&trackpad {
+ status = "fail-needs-probe";
+};
@@ -358,12 +358,12 @@ touchscreen: touchscreen@10 {
&i2c4 {
clock-frequency = <400000>;
status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&trackpad_irq>;
trackpad: trackpad@15 {
compatible = "elan,ekth3000";
interrupts-extended = <&pio 117 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&trackpad_irq>;
reg = <0x15>;
vcc-supply = <&mt6397_vgp6_reg>;
wakeup-source;
Instead of having them all available, mark them all as "fail-needs-probe" and have the implementation try to probe which one is present. Also remove the shared resource workaround by moving the pinctrl entry for the trackpad interrupt line back into the individual trackpad nodes. Signed-off-by: Chen-Yu Tsai <wenst@chromium.org> --- Changes since v7: - Mark touchscreen@40 as "fail-needs-probe" as well Changes since v6: none Changes since v5: none Changes since v4: - Rebased Changes since v3: - Also remove second source workaround, i.e. move the interrupt line pinctrl entry from the i2c node back to the components. Changes since v2: - Drop class from status --- arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi | 14 ++++++++++++++ arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi | 4 ++-- 2 files changed, 16 insertions(+), 2 deletions(-)