@@ -213,6 +213,10 @@ struct smb_version_operations {
bool (*need_neg)(struct TCP_Server_Info *);
/* negotiate to the server */
int (*negotiate)(const unsigned int, struct cifs_ses *);
+ /* set negotiated write size */
+ unsigned int (*negotiate_wsize)(struct cifs_tcon *, struct smb_vol *);
+ /* set negotiated read size */
+ unsigned int (*negotiate_rsize)(struct cifs_tcon *, struct smb_vol *);
/* setup smb sessionn */
int (*sess_setup)(const unsigned int, struct cifs_ses *,
const struct nls_table *);
@@ -516,6 +520,63 @@ get_next_mid(struct TCP_Server_Info *server)
}
/*
+ * When the server supports very large reads and writes via POSIX extensions,
+ * we can allow up to 2^24-1, minus the size of a READ/WRITE_AND_X header, not
+ * including the RFC1001 length.
+ *
+ * Note that this might make for "interesting" allocation problems during
+ * writeback however as we have to allocate an array of pointers for the
+ * pages. A 16M write means ~32kb page array with PAGE_CACHE_SIZE == 4096.
+ *
+ * For reads, there is a similar problem as we need to allocate an array
+ * of kvecs to handle the receive, though that should only need to be done
+ * once.
+ */
+#define CIFS_MAX_WSIZE ((1<<24) - 1 - sizeof(WRITE_REQ) + 4)
+#define CIFS_MAX_RSIZE ((1<<24) - sizeof(READ_RSP) + 4)
+
+/*
+ * When the server doesn't allow large posix writes, only allow a rsize/wsize
+ * of 2^17-1 minus the size of the call header. That allows for a read or
+ * write up to the maximum size described by RFC1002.
+ */
+#define CIFS_MAX_RFC1002_WSIZE ((1<<17) - 1 - sizeof(WRITE_REQ) + 4)
+#define CIFS_MAX_RFC1002_RSIZE ((1<<17) - 1 - sizeof(READ_RSP) + 4)
+
+/*
+ * The default wsize is 1M. find_get_pages seems to return a maximum of 256
+ * pages in a single call. With PAGE_CACHE_SIZE == 4k, this means we can fill
+ * a single wsize request with a single call.
+ */
+#define CIFS_DEFAULT_IOSIZE (1024 * 1024)
+
+/*
+ * Windows only supports a max of 60kb reads and 65535 byte writes. Default to
+ * those values when posix extensions aren't in force. In actuality here, we
+ * use 65536 to allow for a write that is a multiple of 4k. Most servers seem
+ * to be ok with the extra byte even though Windows doesn't send writes that
+ * are that large.
+ *
+ * Citation:
+ *
+ * http://blogs.msdn.com/b/openspecification/archive/2009/04/10/smb-maximum-transmit-buffer-size-and-performance-tuning.aspx
+ */
+#define CIFS_DEFAULT_NON_POSIX_RSIZE (60 * 1024)
+#define CIFS_DEFAULT_NON_POSIX_WSIZE (65536)
+
+/*
+ * On hosts with high memory, we can't currently support wsize/rsize that are
+ * larger than we can kmap at once. Cap the rsize/wsize at
+ * LAST_PKMAP * PAGE_SIZE. We'll never be able to fill a read or write request
+ * larger than that anyway.
+ */
+#ifdef CONFIG_HIGHMEM
+#define CIFS_KMAP_SIZE_LIMIT (LAST_PKMAP * PAGE_CACHE_SIZE)
+#else /* CONFIG_HIGHMEM */
+#define CIFS_KMAP_SIZE_LIMIT (1<<24)
+#endif /* CONFIG_HIGHMEM */
+
+/*
* Macros to allow the TCP_Server_Info->net field and related code to drop out
* when CONFIG_NET_NS isn't set.
*/
@@ -3260,146 +3260,6 @@ void cifs_setup_cifs_sb(struct smb_vol *pvolume_info,
"mount option supported");
}
-/*
- * When the server supports very large reads and writes via POSIX extensions,
- * we can allow up to 2^24-1, minus the size of a READ/WRITE_AND_X header, not
- * including the RFC1001 length.
- *
- * Note that this might make for "interesting" allocation problems during
- * writeback however as we have to allocate an array of pointers for the
- * pages. A 16M write means ~32kb page array with PAGE_CACHE_SIZE == 4096.
- *
- * For reads, there is a similar problem as we need to allocate an array
- * of kvecs to handle the receive, though that should only need to be done
- * once.
- */
-#define CIFS_MAX_WSIZE ((1<<24) - 1 - sizeof(WRITE_REQ) + 4)
-#define CIFS_MAX_RSIZE ((1<<24) - sizeof(READ_RSP) + 4)
-
-/*
- * When the server doesn't allow large posix writes, only allow a rsize/wsize
- * of 2^17-1 minus the size of the call header. That allows for a read or
- * write up to the maximum size described by RFC1002.
- */
-#define CIFS_MAX_RFC1002_WSIZE ((1<<17) - 1 - sizeof(WRITE_REQ) + 4)
-#define CIFS_MAX_RFC1002_RSIZE ((1<<17) - 1 - sizeof(READ_RSP) + 4)
-
-/*
- * The default wsize is 1M. find_get_pages seems to return a maximum of 256
- * pages in a single call. With PAGE_CACHE_SIZE == 4k, this means we can fill
- * a single wsize request with a single call.
- */
-#define CIFS_DEFAULT_IOSIZE (1024 * 1024)
-
-/*
- * Windows only supports a max of 60kb reads and 65535 byte writes. Default to
- * those values when posix extensions aren't in force. In actuality here, we
- * use 65536 to allow for a write that is a multiple of 4k. Most servers seem
- * to be ok with the extra byte even though Windows doesn't send writes that
- * are that large.
- *
- * Citation:
- *
- * http://blogs.msdn.com/b/openspecification/archive/2009/04/10/smb-maximum-transmit-buffer-size-and-performance-tuning.aspx
- */
-#define CIFS_DEFAULT_NON_POSIX_RSIZE (60 * 1024)
-#define CIFS_DEFAULT_NON_POSIX_WSIZE (65536)
-
-/*
- * On hosts with high memory, we can't currently support wsize/rsize that are
- * larger than we can kmap at once. Cap the rsize/wsize at
- * LAST_PKMAP * PAGE_SIZE. We'll never be able to fill a read or write request
- * larger than that anyway.
- */
-#ifdef CONFIG_HIGHMEM
-#define CIFS_KMAP_SIZE_LIMIT (LAST_PKMAP * PAGE_CACHE_SIZE)
-#else /* CONFIG_HIGHMEM */
-#define CIFS_KMAP_SIZE_LIMIT (1<<24)
-#endif /* CONFIG_HIGHMEM */
-
-static unsigned int
-cifs_negotiate_wsize(struct cifs_tcon *tcon, struct smb_vol *pvolume_info)
-{
- __u64 unix_cap = le64_to_cpu(tcon->fsUnixInfo.Capability);
- struct TCP_Server_Info *server = tcon->ses->server;
- unsigned int wsize;
-
- /* start with specified wsize, or default */
- if (pvolume_info->wsize)
- wsize = pvolume_info->wsize;
- else if (tcon->unix_ext && (unix_cap & CIFS_UNIX_LARGE_WRITE_CAP))
- wsize = CIFS_DEFAULT_IOSIZE;
- else
- wsize = CIFS_DEFAULT_NON_POSIX_WSIZE;
-
- /* can server support 24-bit write sizes? (via UNIX extensions) */
- if (!tcon->unix_ext || !(unix_cap & CIFS_UNIX_LARGE_WRITE_CAP))
- wsize = min_t(unsigned int, wsize, CIFS_MAX_RFC1002_WSIZE);
-
- /*
- * no CAP_LARGE_WRITE_X or is signing enabled without CAP_UNIX set?
- * Limit it to max buffer offered by the server, minus the size of the
- * WRITEX header, not including the 4 byte RFC1001 length.
- */
- if (!(server->capabilities & CAP_LARGE_WRITE_X) ||
- (!(server->capabilities & CAP_UNIX) &&
- (server->sec_mode & (SECMODE_SIGN_ENABLED|SECMODE_SIGN_REQUIRED))))
- wsize = min_t(unsigned int, wsize,
- server->maxBuf - sizeof(WRITE_REQ) + 4);
-
- /* limit to the amount that we can kmap at once */
- wsize = min_t(unsigned int, wsize, CIFS_KMAP_SIZE_LIMIT);
-
- /* hard limit of CIFS_MAX_WSIZE */
- wsize = min_t(unsigned int, wsize, CIFS_MAX_WSIZE);
-
- return wsize;
-}
-
-static unsigned int
-cifs_negotiate_rsize(struct cifs_tcon *tcon, struct smb_vol *pvolume_info)
-{
- __u64 unix_cap = le64_to_cpu(tcon->fsUnixInfo.Capability);
- struct TCP_Server_Info *server = tcon->ses->server;
- unsigned int rsize, defsize;
-
- /*
- * Set default value...
- *
- * HACK alert! Ancient servers have very small buffers. Even though
- * MS-CIFS indicates that servers are only limited by the client's
- * bufsize for reads, testing against win98se shows that it throws
- * INVALID_PARAMETER errors if you try to request too large a read.
- * OS/2 just sends back short reads.
- *
- * If the server doesn't advertise CAP_LARGE_READ_X, then assume that
- * it can't handle a read request larger than its MaxBufferSize either.
- */
- if (tcon->unix_ext && (unix_cap & CIFS_UNIX_LARGE_READ_CAP))
- defsize = CIFS_DEFAULT_IOSIZE;
- else if (server->capabilities & CAP_LARGE_READ_X)
- defsize = CIFS_DEFAULT_NON_POSIX_RSIZE;
- else
- defsize = server->maxBuf - sizeof(READ_RSP);
-
- rsize = pvolume_info->rsize ? pvolume_info->rsize : defsize;
-
- /*
- * no CAP_LARGE_READ_X? Then MS-CIFS states that we must limit this to
- * the client's MaxBufferSize.
- */
- if (!(server->capabilities & CAP_LARGE_READ_X))
- rsize = min_t(unsigned int, CIFSMaxBufSize, rsize);
-
- /* limit to the amount that we can kmap at once */
- rsize = min_t(unsigned int, rsize, CIFS_KMAP_SIZE_LIMIT);
-
- /* hard limit of CIFS_MAX_RSIZE */
- rsize = min_t(unsigned int, rsize, CIFS_MAX_RSIZE);
-
- return rsize;
-}
-
static void
cleanup_volume_info_contents(struct smb_vol *volume_info)
{
@@ -3650,8 +3510,8 @@ try_mount_again:
if (!tcon->ipc && server->ops->qfs_tcon)
server->ops->qfs_tcon(xid, tcon);
- cifs_sb->wsize = cifs_negotiate_wsize(tcon, volume_info);
- cifs_sb->rsize = cifs_negotiate_rsize(tcon, volume_info);
+ cifs_sb->wsize = server->ops->negotiate_wsize(tcon, volume_info);
+ cifs_sb->rsize = server->ops->negotiate_rsize(tcon, volume_info);
/* tune readahead according to rsize */
cifs_sb->bdi.ra_pages = cifs_sb->rsize / PAGE_CACHE_SIZE;
@@ -17,6 +17,7 @@
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
+#include <linux/pagemap.h>
#include "cifsglob.h"
#include "cifsproto.h"
#include "cifs_debug.h"
@@ -410,6 +411,89 @@ cifs_negotiate(const unsigned int xid, struct cifs_ses *ses)
return rc;
}
+static unsigned int
+cifs_negotiate_wsize(struct cifs_tcon *tcon, struct smb_vol *volume_info)
+{
+ __u64 unix_cap = le64_to_cpu(tcon->fsUnixInfo.Capability);
+ struct TCP_Server_Info *server = tcon->ses->server;
+ unsigned int wsize;
+
+ /* start with specified wsize, or default */
+ if (volume_info->wsize)
+ wsize = volume_info->wsize;
+ else if (tcon->unix_ext && (unix_cap & CIFS_UNIX_LARGE_WRITE_CAP))
+ wsize = CIFS_DEFAULT_IOSIZE;
+ else
+ wsize = CIFS_DEFAULT_NON_POSIX_WSIZE;
+
+ /* can server support 24-bit write sizes? (via UNIX extensions) */
+ if (!tcon->unix_ext || !(unix_cap & CIFS_UNIX_LARGE_WRITE_CAP))
+ wsize = min_t(unsigned int, wsize, CIFS_MAX_RFC1002_WSIZE);
+
+ /*
+ * no CAP_LARGE_WRITE_X or is signing enabled without CAP_UNIX set?
+ * Limit it to max buffer offered by the server, minus the size of the
+ * WRITEX header, not including the 4 byte RFC1001 length.
+ */
+ if (!(server->capabilities & CAP_LARGE_WRITE_X) ||
+ (!(server->capabilities & CAP_UNIX) &&
+ (server->sec_mode & (SECMODE_SIGN_ENABLED|SECMODE_SIGN_REQUIRED))))
+ wsize = min_t(unsigned int, wsize,
+ server->maxBuf - sizeof(WRITE_REQ) + 4);
+
+ /* limit to the amount that we can kmap at once */
+ wsize = min_t(unsigned int, wsize, CIFS_KMAP_SIZE_LIMIT);
+
+ /* hard limit of CIFS_MAX_WSIZE */
+ wsize = min_t(unsigned int, wsize, CIFS_MAX_WSIZE);
+
+ return wsize;
+}
+
+static unsigned int
+cifs_negotiate_rsize(struct cifs_tcon *tcon, struct smb_vol *volume_info)
+{
+ __u64 unix_cap = le64_to_cpu(tcon->fsUnixInfo.Capability);
+ struct TCP_Server_Info *server = tcon->ses->server;
+ unsigned int rsize, defsize;
+
+ /*
+ * Set default value...
+ *
+ * HACK alert! Ancient servers have very small buffers. Even though
+ * MS-CIFS indicates that servers are only limited by the client's
+ * bufsize for reads, testing against win98se shows that it throws
+ * INVALID_PARAMETER errors if you try to request too large a read.
+ * OS/2 just sends back short reads.
+ *
+ * If the server doesn't advertise CAP_LARGE_READ_X, then assume that
+ * it can't handle a read request larger than its MaxBufferSize either.
+ */
+ if (tcon->unix_ext && (unix_cap & CIFS_UNIX_LARGE_READ_CAP))
+ defsize = CIFS_DEFAULT_IOSIZE;
+ else if (server->capabilities & CAP_LARGE_READ_X)
+ defsize = CIFS_DEFAULT_NON_POSIX_RSIZE;
+ else
+ defsize = server->maxBuf - sizeof(READ_RSP);
+
+ rsize = volume_info->rsize ? volume_info->rsize : defsize;
+
+ /*
+ * no CAP_LARGE_READ_X? Then MS-CIFS states that we must limit this to
+ * the client's MaxBufferSize.
+ */
+ if (!(server->capabilities & CAP_LARGE_READ_X))
+ rsize = min_t(unsigned int, CIFSMaxBufSize, rsize);
+
+ /* limit to the amount that we can kmap at once */
+ rsize = min_t(unsigned int, rsize, CIFS_KMAP_SIZE_LIMIT);
+
+ /* hard limit of CIFS_MAX_RSIZE */
+ rsize = min_t(unsigned int, rsize, CIFS_MAX_RSIZE);
+
+ return rsize;
+}
+
static void
cifs_qfs_tcon(const unsigned int xid, struct cifs_tcon *tcon)
{
@@ -678,6 +762,8 @@ struct smb_version_operations smb1_operations = {
.check_trans2 = cifs_check_trans2,
.need_neg = cifs_need_neg,
.negotiate = cifs_negotiate,
+ .negotiate_wsize = cifs_negotiate_wsize,
+ .negotiate_rsize = cifs_negotiate_rsize,
.sess_setup = CIFS_SessSetup,
.logoff = CIFSSMBLogoff,
.tree_connect = CIFSTCon,