@@ -611,6 +611,10 @@ cifs_show_options(struct seq_file *s, struct dentry *root)
cifs_sb->ctx->dir_mode);
if (cifs_sb->ctx->iocharset)
seq_printf(s, ",iocharset=%s", cifs_sb->ctx->iocharset);
+ if (tcon->ses->unicode == 0)
+ seq_puts(s, ",nounicode");
+ else if (tcon->ses->unicode == 1)
+ seq_puts(s, ",unicode");
if (tcon->seal)
seq_puts(s, ",seal");
else if (tcon->ses->server->ignore_signature)
@@ -651,6 +651,7 @@ struct smb_version_values {
unsigned int cap_unix;
unsigned int cap_nt_find;
unsigned int cap_large_files;
+ unsigned int cap_unicode;
__u16 signing_enabled;
__u16 signing_required;
size_t create_lease_size;
@@ -1124,6 +1125,7 @@ struct cifs_ses {
bool sign; /* is signing required? */
bool domainAuto:1;
bool expired_pwd; /* track if access denied or expired pwd so can know if need to update */
+ int unicode;
unsigned int flags;
__u16 session_flags;
__u8 smb3signingkey[SMB3_SIGN_KEY_SIZE];
@@ -423,7 +423,10 @@ CIFSSMBNegotiate(const unsigned int xid,
return rc;
pSMB->hdr.Mid = get_next_mid(server);
- pSMB->hdr.Flags2 |= (SMBFLG2_UNICODE | SMBFLG2_ERR_STATUS);
+ pSMB->hdr.Flags2 |= SMBFLG2_ERR_STATUS;
+
+ if (ses->unicode != 0)
+ pSMB->hdr.Flags2 |= SMBFLG2_UNICODE;
if (should_set_ext_sec_flag(ses->sectype)) {
cifs_dbg(FYI, "Requesting extended security\n");
@@ -2338,6 +2338,7 @@ cifs_get_smb_ses(struct TCP_Server_Info *server, struct smb3_fs_context *ctx)
ses->cred_uid = ctx->cred_uid;
ses->linux_uid = ctx->linux_uid;
+ ses->unicode = ctx->unicode;
ses->sectype = ctx->sectype;
ses->sign = ctx->sign;
ses->local_nls = load_nls(ctx->local_nls->charset);
@@ -3928,7 +3929,7 @@ cifs_setup_session(const unsigned int xid, struct cifs_ses *ses,
struct TCP_Server_Info *server,
struct nls_table *nls_info)
{
- int rc = -ENOSYS;
+ int rc = 0;
struct TCP_Server_Info *pserver = SERVER_IS_CHAN(server) ? server->primary_server : server;
struct sockaddr_in6 *addr6 = (struct sockaddr_in6 *)&pserver->dstaddr;
struct sockaddr_in *addr = (struct sockaddr_in *)&pserver->dstaddr;
@@ -3980,6 +3981,26 @@ cifs_setup_session(const unsigned int xid, struct cifs_ses *ses,
if (!linuxExtEnabled)
ses->capabilities &= (~server->vals->cap_unix);
+ /*
+ * Check if the server supports specified encoding mode.
+ * Zero value in vals->cap_unicode indidcates that chosen
+ * protocol dialect does not support non-UNICODE mode.
+ */
+ if (ses->unicode == 1 && server->vals->cap_unicode != 0 &&
+ !(server->capabilities & server->vals->cap_unicode)) {
+ cifs_dbg(VFS, "Server does not support mounting in UNICODE mode\n");
+ rc = -EOPNOTSUPP;
+ } else if (ses->unicode == 0 && server->vals->cap_unicode == 0) {
+ cifs_dbg(VFS, "Server does not support mounting in non-UNICODE mode\n");
+ rc = -EOPNOTSUPP;
+ } else if (ses->unicode == 0) {
+ /*
+ * When UNICODE mode was explicitly disabled then
+ * do not announce client UNICODE capability.
+ */
+ ses->capabilities &= (~server->vals->cap_unicode);
+ }
+
if (ses->auth_key.response) {
cifs_dbg(FYI, "Free previous auth_key.response = %p\n",
ses->auth_key.response);
@@ -3992,8 +4013,12 @@ cifs_setup_session(const unsigned int xid, struct cifs_ses *ses,
cifs_dbg(FYI, "Security Mode: 0x%x Capabilities: 0x%x TimeAdjust: %d\n",
server->sec_mode, server->capabilities, server->timeAdj);
- if (server->ops->sess_setup)
- rc = server->ops->sess_setup(xid, ses, server, nls_info);
+ if (!rc) {
+ if (server->ops->sess_setup)
+ rc = server->ops->sess_setup(xid, ses, server, nls_info);
+ else
+ rc = -ENOSYS;
+ }
if (rc) {
cifs_server_dbg(VFS, "Send error in SessSetup = %d\n", rc);
@@ -4063,6 +4088,7 @@ cifs_construct_tcon(struct cifs_sb_info *cifs_sb, kuid_t fsuid)
ctx->seal = master_tcon->seal;
ctx->witness = master_tcon->use_witness;
ctx->dfs_root_ses = master_tcon->ses->dfs_root_ses;
+ ctx->unicode = master_tcon->ses->unicode;
rc = cifs_set_vol_auth(ctx, master_tcon->ses);
if (rc) {
@@ -127,6 +127,7 @@ const struct fs_parameter_spec smb3_fs_parameters[] = {
fsparam_flag("rootfs", Opt_rootfs),
fsparam_flag("compress", Opt_compress),
fsparam_flag("witness", Opt_witness),
+ fsparam_flag_no("unicode", Opt_unicode),
/* Mount options which take uid or gid */
fsparam_uid("backupuid", Opt_backupuid),
@@ -930,6 +931,10 @@ static int smb3_verify_reconfigure_ctx(struct fs_context *fc,
cifs_errorf(fc, "can not change iocharset during remount\n");
return -EINVAL;
}
+ if (new_ctx->unicode != old_ctx->unicode) {
+ cifs_errorf(fc, "can not change unicode during remount\n");
+ return -EINVAL;
+ }
return 0;
}
@@ -1520,6 +1525,10 @@ static int smb3_fs_context_parse_param(struct fs_context *fc,
ctx->witness = true;
pr_warn_once("Witness protocol support is experimental\n");
break;
+ case Opt_unicode:
+ ctx->unicode = !result.negated;
+ cifs_dbg(FYI, "unicode set to %d\n", ctx->unicode);
+ break;
case Opt_rootfs:
#ifndef CONFIG_CIFS_ROOT
cifs_dbg(VFS, "rootfs support requires CONFIG_CIFS_ROOT config option\n");
@@ -1816,6 +1825,8 @@ int smb3_init_fs_context(struct fs_context *fc)
ctx->symlink_type = CIFS_SYMLINK_TYPE_DEFAULT;
ctx->nonativesocket = 0;
+ ctx->unicode = -1; /* autodetect, but prefer UNICODE mode */
+
/*
* short int override_uid = -1;
* short int override_gid = -1;
@@ -127,6 +127,7 @@ enum cifs_param {
Opt_multichannel,
Opt_compress,
Opt_witness,
+ Opt_unicode,
/* Mount options which take numeric value */
Opt_backupuid,
@@ -296,6 +297,7 @@ struct smb3_fs_context {
bool compress; /* enable SMB2 messages (READ/WRITE) de/compression */
bool rootfs:1; /* if it's a SMB root file system */
bool witness:1; /* use witness protocol */
+ int unicode;
char *leaf_fullpath;
struct cifs_ses *dfs_root_ses;
bool dfs_automount:1; /* set for dfs automount only */
@@ -529,6 +529,7 @@ cifs_ses_add_channel(struct cifs_ses *ses,
ctx->password = ses->password;
ctx->sectype = ses->sectype;
ctx->sign = ses->sign;
+ ctx->unicode = ses->unicode;
/* UNC and paths */
/* XXX: Use ses->server->hostname? */
@@ -1189,6 +1189,7 @@ struct smb_version_values smb1_values = {
.cap_unix = CAP_UNIX,
.cap_nt_find = CAP_NT_SMBS | CAP_NT_FIND,
.cap_large_files = CAP_LARGE_FILES,
+ .cap_unicode = CAP_UNICODE,
.signing_enabled = SECMODE_SIGN_ENABLED,
.signing_required = SECMODE_SIGN_REQUIRED,
};
SMB1 protocol supports non-UNICODE (8-bit OEM character set) and UNICODE (UTF-16) modes. Linux SMB1 client implements both of them but currently does not allow to choose non-UNICODE mode when SMB1 server announce UNICODE mode support. This change adds a new mount option -o nounicode to disable UNICODE mode and force usage of non-UNICODE (8-bit OEM character set) mode. This allows to test non-UNICODE implementation of Linux SMB1 client against any SMB1 server, including modern and recent Windows SMB1 server. Signed-off-by: Pali Rohár <pali@kernel.org> --- fs/smb/client/cifsfs.c | 4 ++++ fs/smb/client/cifsglob.h | 2 ++ fs/smb/client/cifssmb.c | 5 ++++- fs/smb/client/connect.c | 32 +++++++++++++++++++++++++++++--- fs/smb/client/fs_context.c | 11 +++++++++++ fs/smb/client/fs_context.h | 2 ++ fs/smb/client/sess.c | 1 + fs/smb/client/smb1ops.c | 1 + 8 files changed, 54 insertions(+), 4 deletions(-)