Series |
Add SD/eMMC support for Renesas RZ/G2L SoC
|
expand
-
[RESEND,5.10.y-cip,00/40] Add SD/eMMC support for Renesas RZ/G2L SoC
-
[RESEND,5.10.y-cip,01/40] mmc: renesas_sdhi: only reset SCC when its pointer is populated
-
[RESEND,5.10.y-cip,02/40] mmc: renesas_sdhi: probe into TMIO after SCC parameters have been setup
-
[RESEND,5.10.y-cip,03/40] mmc: renesas_sdhi: populate SCC pointer at the proper place
-
[RESEND,5.10.y-cip,04/40] mmc: renesas_sdhi: simplify reset routine a little
-
[RESEND,5.10.y-cip,05/40] mmc: renesas_sdhi: clear TAPEN when resetting, too
-
[RESEND,5.10.y-cip,06/40] mmc: renesas_sdhi: merge the SCC reset functions
-
[RESEND,5.10.y-cip,07/40] mmc: renesas_sdhi: remove superfluous SCLKEN
-
[RESEND,5.10.y-cip,08/40] mmc: renesas_sdhi: improve HOST_MODE usage
-
[RESEND,5.10.y-cip,09/40] mmc: renesas_sdhi: don't hardcode SDIF values
-
[RESEND,5.10.y-cip,10/40] mmc: renesas_sdhi: sort includes
-
[RESEND,5.10.y-cip,11/40] mmc: tmio: set max_busy_timeout
-
[RESEND,5.10.y-cip,12/40] mmc: tmio: add hook for custom busy_wait calculation
-
[RESEND,5.10.y-cip,13/40] mmc: renesas_sdhi: populate hook for longer busy_wait
-
[RESEND,5.10.y-cip,14/40] mmc: renesas_internal_dmac: add pre_req and post_req support
-
[RESEND,5.10.y-cip,15/40] mmc: tmio: Add data timeout error detection
-
[RESEND,5.10.y-cip,16/40] mmc: renesas_sdhi: Add a condition of cmd/data timeout for retune
-
[RESEND,5.10.y-cip,17/40] mmc: tmio: support custom irq masks
-
[RESEND,5.10.y-cip,18/40] mmc: renesas_sdhi: use custom mask for TMIO_MASK_ALL
-
[RESEND,5.10.y-cip,19/40] mmc: tmio: abort DMA before reset
-
[RESEND,5.10.y-cip,20/40] mmc: tmio: restore bus width when resetting
-
[RESEND,5.10.y-cip,21/40] mmc: renesas_sdhi: break SCC reset into own function
-
[RESEND,5.10.y-cip,22/40] mmc: renesas_sdhi: do hard reset if possible
-
[RESEND,5.10.y-cip,23/40] mmc: tmio: always flag retune when resetting and a card is present
-
[RESEND,5.10.y-cip,24/40] mmc: tmio: always restore irq register
-
[RESEND,5.10.y-cip,25/40] mmc: tmio: reenable card irqs after the reset callback
-
[RESEND,5.10.y-cip,26/40] mmc: tmio: reinit card irqs in reset routine
-
[RESEND,5.10.y-cip,27/40] clk: renesas: rzg2l: Add SDHI clk mux support
-
[RESEND,5.10.y-cip,28/40] clk: renesas: rzg2l: Add missing kerneldoc for resets
-
[RESEND,5.10.y-cip,29/40] clk: renesas: rzg2l: Check return value of pm_genpd_init()
-
[RESEND,5.10.y-cip,30/40] clk: renesas: rzg2l: propagate return value of_genpd_add_provider_simple()
-
[RESEND,5.10.y-cip,31/40] clk: renesas: r9a07g044: Add SDHI clock and reset entries
-
[RESEND,5.10.y-cip,32/40] dt-bindings: Fix errors in 'if' schemas
-
[RESEND,5.10.y-cip,33/40] dt-bindings: Drop redundant minItems/maxItems
-
[RESEND,5.10.y-cip,34/40] dt-bindings: mmc: renesas,sdhi: Fix dtbs-check warning
-
[RESEND,5.10.y-cip,35/40] dt-bindings: mmc: renesas,sdhi: Document RZ/G2L bindings
-
[RESEND,5.10.y-cip,36/40] dt-bindings: mmc: renesas,sdhi: Add optional SDnH clock
-
[RESEND,5.10.y-cip,37/40] dt-bindings: mmc: renesas,sdhi: Rename RZ/G2L clocks
-
[RESEND,5.10.y-cip,38/40] arm64: dts: renesas: r9a07g044: Add SDHI nodes
-
[RESEND,5.10.y-cip,39/40] arm64: dts: renesas: rzg2l-smarc-som: Enable eMMC on SMARC platform
-
[RESEND,5.10.y-cip,40/40] arm64: dts: renesas: rzg2l-smarc: Enable microSD on SMARC platform
|