diff mbox series

[RESEND,5.10.y-cip,15/40] mmc: tmio: Add data timeout error detection

Message ID 20220401194234.14057-16-prabhakar.mahadev-lad.rj@bp.renesas.com (mailing list archive)
State Accepted
Delegated to: Pavel Machek
Headers show
Series Add SD/eMMC support for Renesas RZ/G2L SoC | expand

Commit Message

Lad Prabhakar April 1, 2022, 7:42 p.m. UTC 
From: Masaharu Hayakawa <masaharu.hayakawa.ry@renesas.com>

commit 35cdcd1268f654f55e2308767349c44bd25d8009 upstream.

Currently, busy timeout is not checked for data transfer command. But,
if the temperature condition changes, the data cannot be acquired
correctly and timeout may occur. Also, we could reproduce an issue by
using mmc_test driver (e.g. "Correct xfer_size at write (start
failure)"). Therefore, this adds timeout error check.

Signed-off-by: Masaharu Hayakawa <masaharu.hayakawa.ry@renesas.com>
[saito: rework commit message.]
Signed-off-by: Takeshi Saito <takeshi.saito.xv@renesas.com>
[shimoda: rebase, add commit description]
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/1608708622-29668-2-git-send-email-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
---
 drivers/mmc/host/tmio_mmc_core.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/drivers/mmc/host/tmio_mmc_core.c b/drivers/mmc/host/tmio_mmc_core.c
index 85dc5b9f4e60..e694d98faed1 100644
--- a/drivers/mmc/host/tmio_mmc_core.c
+++ b/drivers/mmc/host/tmio_mmc_core.c
@@ -477,8 +477,10 @@  static void tmio_mmc_data_irq(struct tmio_mmc_host *host, unsigned int stat)
 	if (!data)
 		goto out;
 
-	if (stat & TMIO_STAT_CRCFAIL || stat & TMIO_STAT_STOPBIT_ERR ||
-	    stat & TMIO_STAT_TXUNDERRUN)
+	if (stat & TMIO_STAT_DATATIMEOUT)
+		data->error = -ETIMEDOUT;
+	else if (stat & TMIO_STAT_CRCFAIL || stat & TMIO_STAT_STOPBIT_ERR ||
+		 stat & TMIO_STAT_TXUNDERRUN)
 		data->error = -EILSEQ;
 	if (host->dma_on && (data->flags & MMC_DATA_WRITE)) {
 		u32 status = sd_ctrl_read16_and_16_as_32(host, CTL_STATUS);