diff mbox series

[RESEND,5.10.y-cip,40/40] arm64: dts: renesas: rzg2l-smarc: Enable microSD on SMARC platform

Message ID 20220401194234.14057-41-prabhakar.mahadev-lad.rj@bp.renesas.com (mailing list archive)
State Accepted
Delegated to: Pavel Machek
Headers show
Series Add SD/eMMC support for Renesas RZ/G2L SoC | expand

Commit Message

Lad Prabhakar April 1, 2022, 7:42 p.m. UTC 
From: Biju Das <biju.das.jz@bp.renesas.com>

commit 34cdc0edfe8f6d660e3c4c47d10f5506d08f09e1 upstream.

This patch enables microSD card slot connected to SDHI1 on RZ/G2L SMARC
platform.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20211010142520.21976-3-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
[PL: Manually applied the changes]
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
---
 arch/arm64/boot/dts/renesas/rzg2l-smarc.dtsi | 62 ++++++++++++++++++++
 1 file changed, 62 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/renesas/rzg2l-smarc.dtsi b/arch/arm64/boot/dts/renesas/rzg2l-smarc.dtsi
index 70aca5d0306d..0cd7da8af1d4 100644
--- a/arch/arm64/boot/dts/renesas/rzg2l-smarc.dtsi
+++ b/arch/arm64/boot/dts/renesas/rzg2l-smarc.dtsi
@@ -31,6 +31,16 @@ 
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
 	};
+
+	vccq_sdhi1: regulator-vccq-sdhi1 {
+		compatible = "regulator-gpio";
+		regulator-name = "SDHI1 VccQ";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		gpios = <&pinctrl RZG2L_GPIO(39, 1) GPIO_ACTIVE_HIGH>;
+		gpios-states = <1>;
+		states = <3300000 1>, <1800000 0>;
+	};
 };
 
 &canfd {
@@ -149,6 +159,45 @@ 
 			 <RZG2L_PORT_PINMUX(48, 4, 1)>; /* RTS# */
 	};
 
+	sd1-pwr-en-hog {
+		gpio-hog;
+		gpios = <RZG2L_GPIO(39, 2) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "sd1_pwr_en";
+	};
+
+	sdhi1_pins: sd1 {
+		sd1_data {
+			pins = "SD1_DATA0", "SD1_DATA1", "SD1_DATA2", "SD1_DATA3";
+			power-source = <3300>;
+		};
+
+		sd1_ctrl {
+			pins = "SD1_CLK", "SD1_CMD";
+			power-source = <3300>;
+		};
+
+		sd1_mux {
+			pinmux = <RZG2L_PORT_PINMUX(19, 0, 1)>; /* SD1_CD */
+		};
+	};
+
+	sdhi1_pins_uhs: sd1_uhs {
+		sd1_data_uhs {
+			pins = "SD1_DATA0", "SD1_DATA1", "SD1_DATA2", "SD1_DATA3";
+			power-source = <1800>;
+		};
+
+		sd1_ctrl_uhs {
+			pins = "SD1_CLK", "SD1_CMD";
+			power-source = <1800>;
+		};
+
+		sd1_mux_uhs {
+			pinmux = <RZG2L_PORT_PINMUX(19, 0, 1)>; /* SD1_CD */
+		};
+	};
+
 	usb0_pins: usb0 {
 		pinmux = <RZG2L_PORT_PINMUX(4, 0, 1)>, /* VBUS */
 			 <RZG2L_PORT_PINMUX(5, 0, 1)>, /* OVC */
@@ -184,6 +233,19 @@ 
 };
 #endif
 
+&sdhi1 {
+	pinctrl-0 = <&sdhi1_pins>;
+	pinctrl-1 = <&sdhi1_pins_uhs>;
+	pinctrl-names = "default", "state_uhs";
+
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&vccq_sdhi1>;
+	bus-width = <4>;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	status = "okay";
+};
+
 &usb2_phy0 {
 	pinctrl-0 = <&usb0_pins>;
 	pinctrl-names = "default";