[5.10.y-cip,05/14] dt-bindings: rtc: isl1208: Convert to json-schema

Commit Message

Biju Das Aug. 18, 2023, 9:27 a.m. UTC

commit ac739bac5201d4308cba2525dacb5da654b3ff31 upstream.

Convert the isl1208 RTC device tree binding documentation to json-schema.

Update the example to match reality.

Signed-off-by: Biju Das <[e-mail]>
Reviewed-by: Krzysztof Kozlowski <[e-mail]>
Link: https://lore.kernel.org/r/[e-mail]
Signed-off-by: Alexandre Belloni <[e-mail]>
Signed-off-by: Biju Das <[e-mail]>
---
 .../devicetree/bindings/rtc/isil,isl1208.txt  | 38 --------
 .../devicetree/bindings/rtc/isil,isl1208.yaml | 89 +++++++++++++++++++
 2 files changed, 89 insertions(+), 38 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/rtc/isil,isl1208.txt
 create mode 100644 Documentation/devicetree/bindings/rtc/isil,isl1208.yaml

Patch

diff --git a/Documentation/devicetree/bindings/rtc/isil,isl1208.txt b/Documentation/devicetree/bindings/rtc/isil,isl1208.txt
deleted file mode 100644
index 51f003006f04..000000000000
--- a/Documentation/devicetree/bindings/rtc/isil,isl1208.txt
+++ /dev/null
@@ -1,38 +0,0 @@ 
-Intersil ISL1209/19 I2C RTC/Alarm chip with event in
-
-ISL12X9 have additional pins EVIN and #EVDET for tamper detection, while the
-ISL1208 and ISL1218 do not.  They are all use the same driver with the bindings
-described here, with chip specific properties as noted.
-
-Required properties supported by the device:
- - "compatible": Should be one of the following:
-		- "isil,isl1208"
-		- "isil,isl1209"
-		- "isil,isl1218"
-		- "isil,isl1219"
- - "reg": I2C bus address of the device
-
-Optional properties:
- - "interrupt-names": list which may contains "irq" and "evdet"
-	evdet applies to isl1209 and isl1219 only
- - "interrupts": list of interrupts for "irq" and "evdet"
-	evdet applies to isl1209 and isl1219 only
- - "isil,ev-evienb": Enable or disable internal pull on EVIN pin
-	Applies to isl1209 and isl1219 only
-	Possible values are 0 and 1
-	Value 0 enables internal pull-up on evin pin, 1 disables it.
-	Default will leave the non-volatile configuration of the pullup
-	as is.
-
-Example isl1219 node with #IRQ pin connected to SoC gpio1 pin12 and #EVDET pin
-connected to SoC gpio2 pin 24 and internal pull-up enabled in EVIN pin.
-
-	isl1219: rtc@68 {
-		compatible = "isil,isl1219";
-		reg = <0x68>;
-		interrupt-names = "irq", "evdet";
-		interrupts-extended = <&gpio1 12 IRQ_TYPE_EDGE_FALLING>,
-			<&gpio2 24 IRQ_TYPE_EDGE_FALLING>;
-		isil,ev-evienb = <1>;
-	};
-
diff --git a/Documentation/devicetree/bindings/rtc/isil,isl1208.yaml b/Documentation/devicetree/bindings/rtc/isil,isl1208.yaml
new file mode 100644
index 000000000000..565965147ce6
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/isil,isl1208.yaml
@@ -0,0 +1,89 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/isil,isl1208.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intersil ISL1209/19 I2C RTC/Alarm chip with event in
+
+maintainers:
+  - Biju Das <[e-mail]>
+  - Trent Piepho <[e-mail]>
+
+description:
+  ISL12X9 have additional pins EVIN and EVDET for tamper detection, while the
+  ISL1208 and ISL1218 do not.
+
+properties:
+  compatible:
+    enum:
+      - isil,isl1208
+      - isil,isl1209
+      - isil,isl1218
+      - isil,isl1219
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 1
+    maxItems: 2
+
+  interrupt-names:
+    minItems: 1
+    items:
+      - const: irq
+      - const: evdet
+
+  isil,ev-evienb:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 0, 1 ]
+    description: |
+      Enable or disable internal pull on EVIN pin
+      Default will leave the non-volatile configuration of the pullup
+      as is.
+        <0> : Enables internal pull-up on evin pin
+        <1> : Disables internal pull-up on evin pin
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: rtc.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - isil,isl1209
+              - isil,isl1219
+    then:
+      properties:
+        interrupts:
+          maxItems: 2
+        interrupt-names:
+          items:
+            - const: irq
+            - const: evdet
+    else:
+      properties:
+        interrupts:
+          maxItems: 1
+        interrupt-names:
+          items:
+            - const: irq
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        rtc_twi: rtc@6f {
+            compatible = "isil,isl1208";
+            reg = <0x6f>;
+        };
+    };