diff mbox series

[5.10.y-cip,05/31] mfd: da9062: Support SMBus and I2C mode

Message ID 20240716082255.56551-6-biju.das.jz@bp.renesas.com (mailing list archive)
State New
Headers show
Series Add PMIC DA9062 support | expand

Commit Message

Biju Das July 16, 2024, 8:22 a.m. UTC 
From: Andrej Picej <andrej.picej@norik.com>

commit 5c6f0f456351f5ca7d3b1a82060821eac4a7dc5c upstream.

Enable the I2C bus mode if I2C_FUNC_I2C is set. Based on da6093 commit:
"586478bfc9f7 mfd: da9063: Support SMBus and I2C mode"

Signed-off-by: Andrej Picej <andrej.picej@norik.com>
Reviewed-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20211124065119.2514872-1-andrej.picej@norik.com
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
---
 drivers/mfd/da9062-core.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)
diff mbox series

Patch

diff --git a/drivers/mfd/da9062-core.c b/drivers/mfd/da9062-core.c
index 01f8e10dfa55..2774b2cbaea6 100644
--- a/drivers/mfd/da9062-core.c
+++ b/drivers/mfd/da9062-core.c
@@ -556,6 +556,7 @@  static const struct regmap_range da9062_aa_writeable_ranges[] = {
 	regmap_reg_range(DA9062AA_VBUCK3_B, DA9062AA_VBUCK3_B),
 	regmap_reg_range(DA9062AA_VLDO1_B, DA9062AA_VLDO4_B),
 	regmap_reg_range(DA9062AA_BBAT_CONT, DA9062AA_BBAT_CONT),
+	regmap_reg_range(DA9062AA_CONFIG_J, DA9062AA_CONFIG_J),
 	regmap_reg_range(DA9062AA_GP_ID_0, DA9062AA_GP_ID_19),
 };
 
@@ -674,6 +675,17 @@  static int da9062_i2c_probe(struct i2c_client *i2c,
 		return ret;
 	}
 
+	/* If SMBus is not available and only I2C is possible, enter I2C mode */
+	if (i2c_check_functionality(i2c->adapter, I2C_FUNC_I2C)) {
+		dev_info(chip->dev, "Entering I2C mode!\n");
+		ret = regmap_clear_bits(chip->regmap, DA9062AA_CONFIG_J,
+					DA9062AA_TWOWIRE_TO_MASK);
+		if (ret < 0) {
+			dev_err(chip->dev, "Failed to set Two-Wire Bus Mode.\n");
+			return ret;
+		}
+	}
+
 	ret = da9062_clear_fault_log(chip);
 	if (ret < 0)
 		dev_warn(chip->dev, "Cannot clear fault log\n");