diff mbox series

[5.10.y-cip,01/13] reset: rzg2l-usbphy-ctrl: Move reset controller registration

Message ID 20240729153504.510443-2-biju.das.jz@bp.renesas.com (mailing list archive)
State New
Headers show
Series RZ/G2L enhancements | expand

Commit Message

Biju Das July 29, 2024, 3:34 p.m. UTC 
commit b081f13c11500bceb8ab504797a48cc7751de4b5 upstream.

As soon as the reset controller is registered, it could be used by a
reset consumer. That means hardware setup to be done first and then the
registration of the reset controller. So move the registration of reset
controller at the end of probe().

While at it, fix the issue that the reset is not re-asserted in case
devm_reset_controller_register() fails and also use goto statements to
simplify the error path in probe().

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240610164845.89666-1-biju.das.jz@bp.renesas.com
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
---
 drivers/reset/reset-rzg2l-usbphy-ctrl.c | 32 +++++++++++++++----------
 1 file changed, 19 insertions(+), 13 deletions(-)
diff mbox series

Patch

diff --git a/drivers/reset/reset-rzg2l-usbphy-ctrl.c b/drivers/reset/reset-rzg2l-usbphy-ctrl.c
index a8dde4606360..bea3270fb698 100644
--- a/drivers/reset/reset-rzg2l-usbphy-ctrl.c
+++ b/drivers/reset/reset-rzg2l-usbphy-ctrl.c
@@ -125,25 +125,14 @@  static int rzg2l_usbphy_ctrl_probe(struct platform_device *pdev)
 	if (error)
 		return error;
 
-	priv->rcdev.ops = &rzg2l_usbphy_ctrl_reset_ops;
-	priv->rcdev.of_reset_n_cells = 1;
-	priv->rcdev.nr_resets = NUM_PORTS;
-	priv->rcdev.of_node = dev->of_node;
-	priv->rcdev.dev = dev;
-
-	error = devm_reset_controller_register(dev, &priv->rcdev);
-	if (error)
-		return error;
-
 	spin_lock_init(&priv->lock);
 	dev_set_drvdata(dev, priv);
 
 	pm_runtime_enable(&pdev->dev);
 	error = pm_runtime_resume_and_get(&pdev->dev);
 	if (error < 0) {
-		pm_runtime_disable(&pdev->dev);
-		reset_control_assert(priv->rstc);
-		return dev_err_probe(&pdev->dev, error, "pm_runtime_resume_and_get failed");
+		dev_err_probe(&pdev->dev, error, "pm_runtime_resume_and_get failed");
+		goto err_pm_disable_reset_deassert;
 	}
 
 	/* put pll and phy into reset state */
@@ -153,7 +142,24 @@  static int rzg2l_usbphy_ctrl_probe(struct platform_device *pdev)
 	writel(val, priv->base + RESET);
 	spin_unlock_irqrestore(&priv->lock, flags);
 
+	priv->rcdev.ops = &rzg2l_usbphy_ctrl_reset_ops;
+	priv->rcdev.of_reset_n_cells = 1;
+	priv->rcdev.nr_resets = NUM_PORTS;
+	priv->rcdev.of_node = dev->of_node;
+	priv->rcdev.dev = dev;
+
+	error = devm_reset_controller_register(dev, &priv->rcdev);
+	if (error)
+		goto err_pm_runtime_put;
+
 	return 0;
+
+err_pm_runtime_put:
+	pm_runtime_put(&pdev->dev);
+err_pm_disable_reset_deassert:
+	pm_runtime_disable(&pdev->dev);
+	reset_control_assert(priv->rstc);
+	return error;
 }
 
 static int rzg2l_usbphy_ctrl_remove(struct platform_device *pdev)