diff mbox series

[6.1.y-cip,14/43] pinctrl: renesas: rzg2l: Add support to configure slew-rate

Message ID 20250331104514.79090-15-tommaso.merciai.xr@bp.renesas.com (mailing list archive)
State New
Headers show
Series Add RZ/G3E pinctrl support | expand

Commit Message

Tommaso Merciai March 31, 2025, 10:44 a.m. UTC 
From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>

commit b588b53b2c474bdebbac0a663e0a6a0390db2fdf upstream.

Add support to configure slew-rate property of the pin.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240530173857.164073-11-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
---
 drivers/pinctrl/renesas/pinctrl-rzg2l.c | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)
diff mbox series

Patch

diff --git a/drivers/pinctrl/renesas/pinctrl-rzg2l.c b/drivers/pinctrl/renesas/pinctrl-rzg2l.c
index 430a7638a9d39..596e101f5b2d4 100644
--- a/drivers/pinctrl/renesas/pinctrl-rzg2l.c
+++ b/drivers/pinctrl/renesas/pinctrl-rzg2l.c
@@ -126,6 +126,7 @@ 
 #define PFC(off)		(0x0400 + (off) * 4)
 #define PIN(off)		(0x0800 + (off))
 #define IOLH(off)		(0x1000 + (off) * 8)
+#define SR(off)			(0x1400 + (off) * 8)
 #define IEN(off)		(0x1800 + (off) * 8)
 #define ISEL(off)		(0x2C00 + (off) * 8)
 #define SD_CH(off, ch)		((off) + (ch) * 4)
@@ -144,6 +145,7 @@ 
 #define PFC_MASK		0x07
 #define IEN_MASK		0x01
 #define IOLH_MASK		0x03
+#define SR_MASK			0x01
 
 #define PM_INPUT		0x1
 #define PM_OUTPUT		0x2
@@ -1049,6 +1051,13 @@  static int rzg2l_pinctrl_pinconf_get(struct pinctrl_dev *pctldev,
 		arg = ret;
 		break;
 
+	case PIN_CONFIG_SLEW_RATE:
+		if (!(cfg & PIN_CFG_SR))
+			return -EINVAL;
+
+		arg = rzg2l_read_pin_config(pctrl, SR(off), bit, SR_MASK);
+		break;
+
 	case PIN_CONFIG_DRIVE_STRENGTH: {
 		unsigned int index;
 
@@ -1155,6 +1164,15 @@  static int rzg2l_pinctrl_pinconf_set(struct pinctrl_dev *pctldev,
 			settings.power_source = pinconf_to_config_argument(_configs[i]);
 			break;
 
+		case PIN_CONFIG_SLEW_RATE:
+			arg = pinconf_to_config_argument(_configs[i]);
+
+			if (!(cfg & PIN_CFG_SR) || arg > 1)
+				return -EINVAL;
+
+			rzg2l_rmw_pin_config(pctrl, SR(off), bit, SR_MASK, arg);
+			break;
+
 		case PIN_CONFIG_DRIVE_STRENGTH:
 			arg = pinconf_to_config_argument(_configs[i]);