@@ -123,6 +123,26 @@ Optional properties:
- opp-suspend: Marks the OPP to be used during device suspend. Only one OPP in
the table should have this.
+- opp-supported-hw: This enables us to select only a subset of OPPs from the
+ larger OPP table, based on what version of the hardware we are running on. We
+ still can't have multiple nodes with the same opp-hz value in OPP table.
+
+ It's an user defined array containing a hierarchy of hardware version numbers,
+ supported by the OPP. For example: a platform with hierarchy of three levels
+ of versions (A, B and C), this field should be like <X Y Z>, where X
+ corresponds to Version hierarchy A, Y corresponds to version hierarchy B and Z
+ corresponds to version hierarchy C.
+
+ Each level of hierarchy is represented by a 32 bit value, and so there can be
+ only 32 different supported version per hierarchy. i.e. 1 bit per version. A
+ value of 0xFFFFFFFF will enable the OPP for all versions for that hierarchy
+ level. And a value of 0x00000000 will disable the OPP completely, and so we
+ never want that to happen.
+
+ If 32 values aren't sufficient for a version hierarchy, than that version
+ hierarchy can be contained in multiple 32 bit values. i.e. <X Y Z1 Z2> in the
+ above example, Z1 & Z2 refer to the version hierarchy Z.
+
- status: Marks the node enabled/disabled.
Example 1: Single cluster Dual-core ARM cortex A9, switch DVFS states together.
@@ -463,3 +483,48 @@ Example 5: Multiple OPP tables
};
};
};
+
+Example 6: opp-supported-hw
+(example: three level hierarchy of versions: cuts, substrate and process)
+
+/ {
+ cpus {
+ cpu@0 {
+ compatible = "arm,cortex-a7";
+ ...
+
+ cpu-supply = <&cpu_supply>
+ operating-points-v2 = <&cpu0_opp_table_slow>;
+ };
+ };
+
+ opp_table {
+ compatible = "operating-points-v2";
+ status = "okay";
+ opp-shared;
+
+ opp00 {
+ /*
+ * Supports all substrate and process versions for 0xF
+ * cuts, i.e. only first four cuts.
+ */
+ opp-supported-hw = <0xF 0xFFFFFFFF 0xFFFFFFFF>
+ opp-hz = /bits/ 64 <600000000>;
+ opp-microvolt = <900000 915000 925000>;
+ ...
+ };
+
+ opp01 {
+ /*
+ * Supports:
+ * - cuts: only one, 6th cut (represented by 6th bit).
+ * - substrate: supports 16 different substrate versions
+ * - process: supports 9 different process versions
+ */
+ opp-supported-hw = <0x20 0xff0000ff 0x0000f4f0>
+ opp-hz = /bits/ 64 <800000000>;
+ opp-microvolt = <900000 915000 925000>;
+ ...
+ };
+ };
+};