diff mbox series

[ndctl,v3,01/16] ndctl/docs: Clarify update-firwmware activation 'overflow' conditions

Message ID 164141830490.3990253.6263569501446070716.stgit@dwillia2-desk3.amr.corp.intel.com
State New, archived
Headers show
Series ndctl: Meson support | expand

Commit Message

Dan Williams Jan. 5, 2022, 9:31 p.m. UTC
Give examples and remediation for "overflow" events, i.e. where the
estimated time to complete activation exceeds the platform advertised
maximum. When that happens forced activation can lead to undefined results.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
---
 Documentation/ndctl/ndctl-update-firmware.txt |   64 +++++++++++++++++++++++++
 1 file changed, 63 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/Documentation/ndctl/ndctl-update-firmware.txt b/Documentation/ndctl/ndctl-update-firmware.txt
index 1080d62a20b9..61664575f5b1 100644
--- a/Documentation/ndctl/ndctl-update-firmware.txt
+++ b/Documentation/ndctl/ndctl-update-firmware.txt
@@ -58,7 +58,69 @@  include::xable-bus-options.txt[]
 	Arm a device for firmware activation. This is enabled by default
 	when a firmware image is specified. Specify --no-arm to disable
 	this default. Otherwise, without a firmware image, this option can be
-	used to manually arm a device for firmware activate.
+	used to manually arm a device for firmware activate. When a
+	device transitions from unarmed to armed the platform recalculates the
+	firmware activation time and compares it against the maximum platform
+	supported time. If the activation time would exceed the platform maximum the
+	arm attempt is aborted:
+
+[verse]
+ndctl update-firmware --arm --bus=nfit_test.0 all
+  Error: update firmware: nmem4: arm aborted, tripped overflow
+[
+  {
+    "dev":"nmem1",
+    "id":"cdab-0a-07e0-ffffffff",
+    "handle":"0",
+    "phys_id":"0",
+    "security":"disabled",
+    "firmware":{
+      "current_version":"0",
+      "can_update":true
+    }
+  },
+  {
+    "dev":"nmem3",
+    "id":"cdab-0a-07e0-fffeffff",
+    "handle":"0x100",
+    "phys_id":"0x2",
+    "security":"disabled",
+    "firmware":{
+      "current_version":"0",
+      "can_update":true
+    }
+  },
+  {
+    "dev":"nmem2",
+    "id":"cdab-0a-07e0-feffffff",
+    "handle":"0x1",
+    "phys_id":"0x1",
+    "security":"disabled",
+    "firmware":{
+      "current_version":"0",
+      "can_update":true
+    }
+  }
+]
+updated 3 nmems.
+
+	It is possible, but not recommended, to ignore timeout overflows
+	with the --force option. At any point to view the 'armed' state of the
+	bus do:
+
+[verse]
+ndctl list -BF -b nfit_test.0
+[
+  {
+    "provider":"nfit_test.0",
+    "dev":"ndbus2",
+    "scrub_state":"idle",
+    "firmware":{
+      "activate_method":"suspend",
+      "activate_state":"overflow"
+    }
+  }
+]
 
 -D::
 --disarm::