@@ -49,6 +49,8 @@ enum {
LOGS = 0x04,
#define GET_SUPPORTED 0x0
#define GET_LOG 0x1
+ IDENTIFY = 0x40,
+ #define MEMORY_DEVICE 0x0
};
/* 8.2.8.4.5.1 Command Return Codes */
@@ -127,6 +129,7 @@ declare_mailbox_handler(TIMESTAMP_GET);
declare_mailbox_handler(TIMESTAMP_SET);
declare_mailbox_handler(LOGS_GET_SUPPORTED);
declare_mailbox_handler(LOGS_GET_LOG);
+declare_mailbox_handler(IDENTIFY_MEMORY_DEVICE);
#define IMMEDIATE_CONFIG_CHANGE (1 << 1)
#define IMMEDIATE_POLICY_CHANGE (1 << 3)
@@ -144,6 +147,7 @@ static struct cxl_cmd cxl_cmd_set[256][256] = {
CXL_CMD(TIMESTAMP, SET, 8, IMMEDIATE_POLICY_CHANGE),
CXL_CMD(LOGS, GET_SUPPORTED, 0, 0),
CXL_CMD(LOGS, GET_LOG, 0x18, 0),
+ CXL_CMD(IDENTIFY, MEMORY_DEVICE, 0, 0),
};
#undef CXL_CMD
@@ -255,6 +259,46 @@ define_mailbox_handler(LOGS_GET_LOG)
return CXL_MBOX_SUCCESS;
}
+/* 8.2.9.5.1.1 */
+define_mailbox_handler(IDENTIFY_MEMORY_DEVICE)
+{
+ struct {
+ char fw_revision[0x10];
+ uint64_t total_capacity;
+ uint64_t volatile_capacity;
+ uint64_t persistent_capacity;
+ uint64_t partition_align;
+ uint16_t info_event_log_size;
+ uint16_t warning_event_log_size;
+ uint16_t failure_event_log_size;
+ uint16_t fatal_event_log_size;
+ uint32_t lsa_size;
+ uint8_t poison_list_max_mer[3];
+ uint16_t inject_poison_limit;
+ uint8_t poison_caps;
+ uint8_t qos_telemetry_caps;
+ } __attribute__((packed)) *id;
+ _Static_assert(sizeof(*id) == 0x43, "Bad identify size");
+
+ uint64_t size = cxl_dstate->pmem_size;
+
+ if (!QEMU_IS_ALIGNED(size, 256 << 20)) {
+ return CXL_MBOX_INTERNAL_ERROR;
+ }
+
+ id = (void *)cmd->payload;
+ memset(id, 0, sizeof(*id));
+
+ /* PMEM only */
+ snprintf(id->fw_revision, 0x10, "BWFW VERSION %02d", 0);
+
+ id->total_capacity = size / (256 << 20);
+ id->persistent_capacity = size / (256 << 20);
+
+ *len = sizeof(*id);
+ return CXL_MBOX_SUCCESS;
+}
+
void cxl_process_mailbox(CXLDeviceState *cxl_dstate)
{
uint16_t ret = CXL_MBOX_SUCCESS;
@@ -11,3 +11,8 @@ config NVDIMM
config SPARSE_MEM
bool
+
+config CXL_MEM_DEVICE
+ bool
+ default y if CXL
+ select MEM_DEVICE
new file mode 100644
@@ -0,0 +1,170 @@
+#include "qemu/osdep.h"
+#include "qemu/units.h"
+#include "qemu/error-report.h"
+#include "hw/mem/memory-device.h"
+#include "hw/mem/pc-dimm.h"
+#include "hw/pci/pci.h"
+#include "hw/qdev-properties.h"
+#include "qapi/error.h"
+#include "qemu/log.h"
+#include "qemu/module.h"
+#include "qemu/range.h"
+#include "qemu/rcu.h"
+#include "sysemu/hostmem.h"
+#include "hw/cxl/cxl.h"
+
+typedef struct cxl_type3_dev {
+ /* Private */
+ PCIDevice parent_obj;
+
+ /* Properties */
+ uint64_t size;
+ HostMemoryBackend *hostmem;
+
+ /* State */
+ CXLComponentState cxl_cstate;
+ CXLDeviceState cxl_dstate;
+} CXLType3Dev;
+
+#define CT3(obj) OBJECT_CHECK(CXLType3Dev, (obj), TYPE_CXL_TYPE3_DEV)
+
+static void build_dvsecs(CXLType3Dev *ct3d)
+{
+ CXLComponentState *cxl_cstate = &ct3d->cxl_cstate;
+ uint8_t *dvsec;
+
+ dvsec = (uint8_t *)&(struct cxl_dvsec_device){
+ .cap = 0x1e,
+ .ctrl = 0x6,
+ .status2 = 0x2,
+ .range1_size_hi = 0,
+#ifdef SET_PMEM_PADDR
+ .range1_size_lo = (2 << 5) | (2 << 2) | 0x3 | ct3d->size,
+#else
+ .range1_size_lo = 0x3,
+#endif
+ .range1_base_hi = 0,
+ .range1_base_lo = 0,
+ };
+ cxl_component_create_dvsec(cxl_cstate, PCIE_CXL_DEVICE_DVSEC_LENGTH,
+ PCIE_CXL_DEVICE_DVSEC,
+ PCIE_CXL2_DEVICE_DVSEC_REVID, dvsec);
+
+ dvsec = (uint8_t *)&(struct cxl_dvsec_register_locator){
+ .rsvd = 0,
+ .reg0_base_lo = RBI_COMPONENT_REG | CXL_COMPONENT_REG_BAR_IDX,
+ .reg0_base_hi = 0,
+ .reg1_base_lo = RBI_CXL_DEVICE_REG | CXL_DEVICE_REG_BAR_IDX,
+ .reg1_base_hi = 0,
+ };
+ cxl_component_create_dvsec(cxl_cstate, REG_LOC_DVSEC_LENGTH, REG_LOC_DVSEC,
+ REG_LOC_DVSEC_REVID, dvsec);
+}
+
+static void cxl_setup_memory(CXLType3Dev *ct3d, Error **errp)
+{
+ MemoryRegion *mr;
+
+ if (!ct3d->hostmem) {
+ error_setg(errp, "memdev property must be set");
+ return;
+ }
+
+ mr = host_memory_backend_get_memory(ct3d->hostmem);
+ if (!mr) {
+ error_setg(errp, "memdev property must be set");
+ return;
+ }
+ memory_region_set_nonvolatile(mr, true);
+ memory_region_set_enabled(mr, true);
+ host_memory_backend_set_mapped(ct3d->hostmem, true);
+ ct3d->cxl_dstate.pmem_size = ct3d->hostmem->size;
+}
+
+
+static void ct3_realize(PCIDevice *pci_dev, Error **errp)
+{
+ CXLType3Dev *ct3d = CT3(pci_dev);
+ CXLComponentState *cxl_cstate = &ct3d->cxl_cstate;
+ ComponentRegisters *regs = &cxl_cstate->crb;
+ MemoryRegion *mr = ®s->component_registers;
+ uint8_t *pci_conf = pci_dev->config;
+
+ if (!ct3d->hostmem) {
+ cxl_setup_memory(ct3d, errp);
+ }
+
+ pci_config_set_prog_interface(pci_conf, 0x10);
+ pci_config_set_class(pci_conf, PCI_CLASS_MEMORY_CXL);
+
+ pcie_endpoint_cap_init(pci_dev, 0x80);
+ cxl_cstate->dvsec_offset = 0x100;
+
+ ct3d->cxl_cstate.pdev = pci_dev;
+ build_dvsecs(ct3d);
+
+ cxl_component_register_block_init(OBJECT(pci_dev), cxl_cstate,
+ TYPE_CXL_TYPE3_DEV);
+
+ pci_register_bar(
+ pci_dev, CXL_COMPONENT_REG_BAR_IDX,
+ PCI_BASE_ADDRESS_SPACE_MEMORY | PCI_BASE_ADDRESS_MEM_TYPE_64, mr);
+
+ cxl_device_register_block_init(OBJECT(pci_dev), &ct3d->cxl_dstate);
+ pci_register_bar(pci_dev, CXL_DEVICE_REG_BAR_IDX,
+ PCI_BASE_ADDRESS_SPACE_MEMORY |
+ PCI_BASE_ADDRESS_MEM_TYPE_64,
+ &ct3d->cxl_dstate.device_registers);
+}
+
+static void ct3d_reset(DeviceState *dev)
+{
+ CXLType3Dev *ct3d = CT3(dev);
+ uint32_t *reg_state = ct3d->cxl_cstate.crb.cache_mem_registers;
+
+ cxl_component_register_init_common(reg_state, CXL2_TYPE3_DEVICE);
+ cxl_device_register_init_common(&ct3d->cxl_dstate);
+}
+
+static Property ct3_props[] = {
+ DEFINE_PROP_SIZE("size", CXLType3Dev, size, -1),
+ DEFINE_PROP_LINK("memdev", CXLType3Dev, hostmem, TYPE_MEMORY_BACKEND,
+ HostMemoryBackend *),
+ DEFINE_PROP_END_OF_LIST(),
+};
+
+static void ct3_class_init(ObjectClass *oc, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(oc);
+ PCIDeviceClass *pc = PCI_DEVICE_CLASS(oc);
+
+ pc->realize = ct3_realize;
+ pc->class_id = PCI_CLASS_STORAGE_EXPRESS;
+ pc->vendor_id = PCI_VENDOR_ID_INTEL;
+ pc->device_id = 0xd93; /* LVF for now */
+ pc->revision = 1;
+
+ set_bit(DEVICE_CATEGORY_STORAGE, dc->categories);
+ dc->desc = "CXL PMEM Device (Type 3)";
+ dc->reset = ct3d_reset;
+ device_class_set_props(dc, ct3_props);
+}
+
+static const TypeInfo ct3d_info = {
+ .name = TYPE_CXL_TYPE3_DEV,
+ .parent = TYPE_PCI_DEVICE,
+ .class_init = ct3_class_init,
+ .instance_size = sizeof(CXLType3Dev),
+ .interfaces = (InterfaceInfo[]) {
+ { INTERFACE_CXL_DEVICE },
+ { INTERFACE_PCIE_DEVICE },
+ {}
+ },
+};
+
+static void ct3d_registers(void)
+{
+ type_register_static(&ct3d_info);
+}
+
+type_init(ct3d_registers);
@@ -3,6 +3,7 @@ mem_ss.add(files('memory-device.c'))
mem_ss.add(when: 'CONFIG_DIMM', if_true: files('pc-dimm.c'))
mem_ss.add(when: 'CONFIG_NPCM7XX', if_true: files('npcm7xx_mc.c'))
mem_ss.add(when: 'CONFIG_NVDIMM', if_true: files('nvdimm.c'))
+mem_ss.add(when: 'CONFIG_CXL_MEM_DEVICE', if_true: files('cxl_type3.c'))
softmmu_ss.add_all(when: 'CONFIG_MEM_DEVICE', if_true: mem_ss)
@@ -17,6 +17,7 @@
#define CXL_COMPONENT_REG_BAR_IDX 0
#define CXL_DEVICE_REG_BAR_IDX 2
+#define TYPE_CXL_TYPE3_DEV "cxl-type3"
#define CXL_WINDOW_MAX 10
typedef struct CXLState {
@@ -64,6 +64,28 @@ _Static_assert(sizeof(struct dvsec_header) == 10,
* CXL 2.0 Downstream Port: 3, 4, 7, 8
*/
+/* CXL 2.0 - 8.1.3 (ID 0001) */
+struct cxl_dvsec_device {
+ struct dvsec_header hdr;
+ uint16_t cap;
+ uint16_t ctrl;
+ uint16_t status;
+ uint16_t ctrl2;
+ uint16_t status2;
+ uint16_t lock;
+ uint16_t cap2;
+ uint32_t range1_size_hi;
+ uint32_t range1_size_lo;
+ uint32_t range1_base_hi;
+ uint32_t range1_base_lo;
+ uint32_t range2_size_hi;
+ uint32_t range2_size_lo;
+ uint32_t range2_base_hi;
+ uint32_t range2_base_lo;
+};
+_Static_assert(sizeof(struct cxl_dvsec_device) == 0x38,
+ "dvsec device size incorrect");
+
/* CXL 2.0 - 8.1.5 (ID 0003) */
struct cxl_dvsec_port_extensions {
struct dvsec_header hdr;
@@ -53,6 +53,7 @@
#define PCI_BASE_CLASS_MEMORY 0x05
#define PCI_CLASS_MEMORY_RAM 0x0500
#define PCI_CLASS_MEMORY_FLASH 0x0501
+#define PCI_CLASS_MEMORY_CXL 0x0502
#define PCI_CLASS_MEMORY_OTHER 0x0580
#define PCI_BASE_CLASS_BRIDGE 0x06