diff mbox series

[RESEND,2/2] hw/cxl: Fix incorrect reset of commit and associated clearing of committed.

Message ID 20230322103300.4278-1-Jonathan.Cameron@huawei.com
State Superseded
Headers show
Series hw/cxl: Fix decoder commit and uncommit handling | expand

Commit Message

Jonathan Cameron March 22, 2023, 10:33 a.m. UTC
The hardware clearing the commit bit is not spec compliant.
Clearing of committed bit when commit is cleared is not specifically
stated in the CXL spec, but is the expected (and simplest) permitted
behaviour so use that for QEMU emulation.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
 hw/cxl/cxl-component-utils.c |  6 +++++-
 hw/mem/cxl_type3.c           | 21 ++++++++++++++++++++-
 2 files changed, 25 insertions(+), 2 deletions(-)

Comments

Fan Ni March 22, 2023, 4:21 p.m. UTC | #1
On Wed, Mar 22, 2023 at 10:33:00AM +0000, Jonathan Cameron wrote:
> The hardware clearing the commit bit is not spec compliant.
> Clearing of committed bit when commit is cleared is not specifically
> stated in the CXL spec, but is the expected (and simplest) permitted
> behaviour so use that for QEMU emulation.
> 
> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
> ---

Reviewed-by: Fan Ni <fan.ni@samsung.com>
Tested-by: Fan Ni <fan.ni@samsung.com>


The patch passed the tests as shown in previous mailing list discussion:
https://lore.kernel.org/linux-cxl/640276695c8e8_5b27929473@dwillia2-xfh.jf.intel.com.notmuch/T/#m0afcfc21d68c84c07f2e9e3194f587c2ffa82d6d
The following two topologies are tested:
1. one HB with one root port and a direct attached memdev.
2. one HB with 2 root ports and a memdev is directly attached to a CXL switch
which is attached to one root port.

One minor thing below.

>  hw/cxl/cxl-component-utils.c |  6 +++++-
>  hw/mem/cxl_type3.c           | 21 ++++++++++++++++++++-
>  2 files changed, 25 insertions(+), 2 deletions(-)
> 
> diff --git a/hw/cxl/cxl-component-utils.c b/hw/cxl/cxl-component-utils.c
> index a3e6cf75cf..378f1082ce 100644
> --- a/hw/cxl/cxl-component-utils.c
> +++ b/hw/cxl/cxl-component-utils.c
> @@ -38,19 +38,23 @@ static void dumb_hdm_handler(CXLComponentState *cxl_cstate, hwaddr offset,
>      ComponentRegisters *cregs = &cxl_cstate->crb;
>      uint32_t *cache_mem = cregs->cache_mem_registers;
>      bool should_commit = false;
> +    bool should_uncommit = false;
>  
>      switch (offset) {
>      case A_CXL_HDM_DECODER0_CTRL:
>          should_commit = FIELD_EX32(value, CXL_HDM_DECODER0_CTRL, COMMIT);
> +        should_uncommit = !should_commit;
This will cause committed always reset if COMMIT is 0, not only
1->0. No issue for now, just point out to make sure it is what we
want.
>          break;
>      default:
>          break;
>      }
>  
>      if (should_commit) {
> -        value = FIELD_DP32(value, CXL_HDM_DECODER0_CTRL, COMMIT, 0);
>          value = FIELD_DP32(value, CXL_HDM_DECODER0_CTRL, ERR, 0);
>          value = FIELD_DP32(value, CXL_HDM_DECODER0_CTRL, COMMITTED, 1);
> +    } else if (should_uncommit) {
> +        value = FIELD_DP32(value, CXL_HDM_DECODER0_CTRL, ERR, 0);
> +        value = FIELD_DP32(value, CXL_HDM_DECODER0_CTRL, COMMITTED, 0);
>      }
>      stl_le_p((uint8_t *)cache_mem + offset, value);
>  }
> diff --git a/hw/mem/cxl_type3.c b/hw/mem/cxl_type3.c
> index 846089ccda..9598d584ac 100644
> --- a/hw/mem/cxl_type3.c
> +++ b/hw/mem/cxl_type3.c
> @@ -320,13 +320,28 @@ static void hdm_decoder_commit(CXLType3Dev *ct3d, int which)
>  
>      ctrl = ldl_le_p(cache_mem + R_CXL_HDM_DECODER0_CTRL);
>      /* TODO: Sanity checks that the decoder is possible */
> -    ctrl = FIELD_DP32(ctrl, CXL_HDM_DECODER0_CTRL, COMMIT, 0);
>      ctrl = FIELD_DP32(ctrl, CXL_HDM_DECODER0_CTRL, ERR, 0);
>      ctrl = FIELD_DP32(ctrl, CXL_HDM_DECODER0_CTRL, COMMITTED, 1);
>  
>      stl_le_p(cache_mem + R_CXL_HDM_DECODER0_CTRL, ctrl);
>  }
>  
> +static void hdm_decoder_uncommit(CXLType3Dev *ct3d, int which)
> +{
> +    ComponentRegisters *cregs = &ct3d->cxl_cstate.crb;
> +    uint32_t *cache_mem = cregs->cache_mem_registers;
> +    uint32_t ctrl;
> +
> +    assert(which == 0);
> +
> +    ctrl = ldl_le_p(cache_mem + R_CXL_HDM_DECODER0_CTRL);
> +
> +    ctrl = FIELD_DP32(ctrl, CXL_HDM_DECODER0_CTRL, ERR, 0);
> +    ctrl = FIELD_DP32(ctrl, CXL_HDM_DECODER0_CTRL, COMMITTED, 0);
> +
> +    stl_le_p(cache_mem + R_CXL_HDM_DECODER0_CTRL, ctrl);
> +}
> +
>  static int ct3d_qmp_uncor_err_to_cxl(CxlUncorErrorType qmp_err)
>  {
>      switch (qmp_err) {
> @@ -395,6 +410,7 @@ static void ct3d_reg_write(void *opaque, hwaddr offset, uint64_t value,
>      CXLType3Dev *ct3d = container_of(cxl_cstate, CXLType3Dev, cxl_cstate);
>      uint32_t *cache_mem = cregs->cache_mem_registers;
>      bool should_commit = false;
> +    bool should_uncommit = false;
>      int which_hdm = -1;
>  
>      assert(size == 4);
> @@ -403,6 +419,7 @@ static void ct3d_reg_write(void *opaque, hwaddr offset, uint64_t value,
>      switch (offset) {
>      case A_CXL_HDM_DECODER0_CTRL:
>          should_commit = FIELD_EX32(value, CXL_HDM_DECODER0_CTRL, COMMIT);
> +        should_uncommit = !should_commit;
>          which_hdm = 0;
>          break;
>      case A_CXL_RAS_UNC_ERR_STATUS:
> @@ -489,6 +506,8 @@ static void ct3d_reg_write(void *opaque, hwaddr offset, uint64_t value,
>      stl_le_p((uint8_t *)cache_mem + offset, value);
>      if (should_commit) {
>          hdm_decoder_commit(ct3d, which_hdm);
> +    } else if (should_uncommit) {
> +        hdm_decoder_uncommit(ct3d, which_hdm);
>      }
>  }
>  
> -- 
> 2.37.2
>
Jonathan Cameron March 24, 2023, 2:01 p.m. UTC | #2
On Wed, 22 Mar 2023 16:21:26 +0000
Fan Ni <fan.ni@samsung.com> wrote:

> On Wed, Mar 22, 2023 at 10:33:00AM +0000, Jonathan Cameron wrote:
> > The hardware clearing the commit bit is not spec compliant.
> > Clearing of committed bit when commit is cleared is not specifically
> > stated in the CXL spec, but is the expected (and simplest) permitted
> > behaviour so use that for QEMU emulation.
> > 
> > Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
> > ---  
> 
> Reviewed-by: Fan Ni <fan.ni@samsung.com>
> Tested-by: Fan Ni <fan.ni@samsung.com>
> 
> 
> The patch passed the tests as shown in previous mailing list discussion:
> https://lore.kernel.org/linux-cxl/640276695c8e8_5b27929473@dwillia2-xfh.jf.intel.com.notmuch/T/#m0afcfc21d68c84c07f2e9e3194f587c2ffa82d6d
> The following two topologies are tested:
> 1. one HB with one root port and a direct attached memdev.
> 2. one HB with 2 root ports and a memdev is directly attached to a CXL switch
> which is attached to one root port.
> 
> One minor thing below.
> 
> >  hw/cxl/cxl-component-utils.c |  6 +++++-
> >  hw/mem/cxl_type3.c           | 21 ++++++++++++++++++++-
> >  2 files changed, 25 insertions(+), 2 deletions(-)
> > 
> > diff --git a/hw/cxl/cxl-component-utils.c b/hw/cxl/cxl-component-utils.c
> > index a3e6cf75cf..378f1082ce 100644
> > --- a/hw/cxl/cxl-component-utils.c
> > +++ b/hw/cxl/cxl-component-utils.c
> > @@ -38,19 +38,23 @@ static void dumb_hdm_handler(CXLComponentState *cxl_cstate, hwaddr offset,
> >      ComponentRegisters *cregs = &cxl_cstate->crb;
> >      uint32_t *cache_mem = cregs->cache_mem_registers;
> >      bool should_commit = false;
> > +    bool should_uncommit = false;
> >  
> >      switch (offset) {
> >      case A_CXL_HDM_DECODER0_CTRL:
> >          should_commit = FIELD_EX32(value, CXL_HDM_DECODER0_CTRL, COMMIT);
> > +        should_uncommit = !should_commit;  
> This will cause committed always reset if COMMIT is 0, not only
> 1->0. No issue for now, just point out to make sure it is what we
> want.

True.  However I think it's harmless.

We will want to be a little careful if uncommitting gains other
functionality in future though.

Note that the same potential corner existing on the commit side of things.
Trying to commit a decoder that is already committed will call the code
for commit (also currently harmless)

I'm not particularly keen to introduce additional complexity to separate
out these cases until / if we ever need it.

Jonathan

> >          break;
> >      default:
> >          break;
> >      }
> >  
> >      if (should_commit) {
> > -        value = FIELD_DP32(value, CXL_HDM_DECODER0_CTRL, COMMIT, 0);
> >          value = FIELD_DP32(value, CXL_HDM_DECODER0_CTRL, ERR, 0);
> >          value = FIELD_DP32(value, CXL_HDM_DECODER0_CTRL, COMMITTED, 1);
> > +    } else if (should_uncommit) {
> > +        value = FIELD_DP32(value, CXL_HDM_DECODER0_CTRL, ERR, 0);
> > +        value = FIELD_DP32(value, CXL_HDM_DECODER0_CTRL, COMMITTED, 0);
> >      }
> >      stl_le_p((uint8_t *)cache_mem + offset, value);
> >  }
> > diff --git a/hw/mem/cxl_type3.c b/hw/mem/cxl_type3.c
> > index 846089ccda..9598d584ac 100644
> > --- a/hw/mem/cxl_type3.c
> > +++ b/hw/mem/cxl_type3.c
> > @@ -320,13 +320,28 @@ static void hdm_decoder_commit(CXLType3Dev *ct3d, int which)
> >  
> >      ctrl = ldl_le_p(cache_mem + R_CXL_HDM_DECODER0_CTRL);
> >      /* TODO: Sanity checks that the decoder is possible */
> > -    ctrl = FIELD_DP32(ctrl, CXL_HDM_DECODER0_CTRL, COMMIT, 0);
> >      ctrl = FIELD_DP32(ctrl, CXL_HDM_DECODER0_CTRL, ERR, 0);
> >      ctrl = FIELD_DP32(ctrl, CXL_HDM_DECODER0_CTRL, COMMITTED, 1);
> >  
> >      stl_le_p(cache_mem + R_CXL_HDM_DECODER0_CTRL, ctrl);
> >  }
> >  
> > +static void hdm_decoder_uncommit(CXLType3Dev *ct3d, int which)
> > +{
> > +    ComponentRegisters *cregs = &ct3d->cxl_cstate.crb;
> > +    uint32_t *cache_mem = cregs->cache_mem_registers;
> > +    uint32_t ctrl;
> > +
> > +    assert(which == 0);
> > +
> > +    ctrl = ldl_le_p(cache_mem + R_CXL_HDM_DECODER0_CTRL);
> > +
> > +    ctrl = FIELD_DP32(ctrl, CXL_HDM_DECODER0_CTRL, ERR, 0);
> > +    ctrl = FIELD_DP32(ctrl, CXL_HDM_DECODER0_CTRL, COMMITTED, 0);
> > +
> > +    stl_le_p(cache_mem + R_CXL_HDM_DECODER0_CTRL, ctrl);
> > +}
> > +
> >  static int ct3d_qmp_uncor_err_to_cxl(CxlUncorErrorType qmp_err)
> >  {
> >      switch (qmp_err) {
> > @@ -395,6 +410,7 @@ static void ct3d_reg_write(void *opaque, hwaddr offset, uint64_t value,
> >      CXLType3Dev *ct3d = container_of(cxl_cstate, CXLType3Dev, cxl_cstate);
> >      uint32_t *cache_mem = cregs->cache_mem_registers;
> >      bool should_commit = false;
> > +    bool should_uncommit = false;
> >      int which_hdm = -1;
> >  
> >      assert(size == 4);
> > @@ -403,6 +419,7 @@ static void ct3d_reg_write(void *opaque, hwaddr offset, uint64_t value,
> >      switch (offset) {
> >      case A_CXL_HDM_DECODER0_CTRL:
> >          should_commit = FIELD_EX32(value, CXL_HDM_DECODER0_CTRL, COMMIT);
> > +        should_uncommit = !should_commit;
> >          which_hdm = 0;
> >          break;
> >      case A_CXL_RAS_UNC_ERR_STATUS:
> > @@ -489,6 +506,8 @@ static void ct3d_reg_write(void *opaque, hwaddr offset, uint64_t value,
> >      stl_le_p((uint8_t *)cache_mem + offset, value);
> >      if (should_commit) {
> >          hdm_decoder_commit(ct3d, which_hdm);
> > +    } else if (should_uncommit) {
> > +        hdm_decoder_uncommit(ct3d, which_hdm);
> >      }
> >  }
> >  
> > -- 
> > 2.37.2
> >
Dave Jiang March 24, 2023, 5:05 p.m. UTC | #3
On 3/22/23 3:33 AM, Jonathan Cameron wrote:
> The hardware clearing the commit bit is not spec compliant.
> Clearing of committed bit when commit is cleared is not specifically
> stated in the CXL spec, but is the expected (and simplest) permitted
> behaviour so use that for QEMU emulation.
> 
> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Reviewed-by: Dave Jiang <dave.jiang@intel.com>

> ---
>   hw/cxl/cxl-component-utils.c |  6 +++++-
>   hw/mem/cxl_type3.c           | 21 ++++++++++++++++++++-
>   2 files changed, 25 insertions(+), 2 deletions(-)
> 
> diff --git a/hw/cxl/cxl-component-utils.c b/hw/cxl/cxl-component-utils.c
> index a3e6cf75cf..378f1082ce 100644
> --- a/hw/cxl/cxl-component-utils.c
> +++ b/hw/cxl/cxl-component-utils.c
> @@ -38,19 +38,23 @@ static void dumb_hdm_handler(CXLComponentState *cxl_cstate, hwaddr offset,
>       ComponentRegisters *cregs = &cxl_cstate->crb;
>       uint32_t *cache_mem = cregs->cache_mem_registers;
>       bool should_commit = false;
> +    bool should_uncommit = false;
>   
>       switch (offset) {
>       case A_CXL_HDM_DECODER0_CTRL:
>           should_commit = FIELD_EX32(value, CXL_HDM_DECODER0_CTRL, COMMIT);
> +        should_uncommit = !should_commit;
>           break;
>       default:
>           break;
>       }
>   
>       if (should_commit) {
> -        value = FIELD_DP32(value, CXL_HDM_DECODER0_CTRL, COMMIT, 0);
>           value = FIELD_DP32(value, CXL_HDM_DECODER0_CTRL, ERR, 0);
>           value = FIELD_DP32(value, CXL_HDM_DECODER0_CTRL, COMMITTED, 1);
> +    } else if (should_uncommit) {
> +        value = FIELD_DP32(value, CXL_HDM_DECODER0_CTRL, ERR, 0);
> +        value = FIELD_DP32(value, CXL_HDM_DECODER0_CTRL, COMMITTED, 0);
>       }
>       stl_le_p((uint8_t *)cache_mem + offset, value);
>   }
> diff --git a/hw/mem/cxl_type3.c b/hw/mem/cxl_type3.c
> index 846089ccda..9598d584ac 100644
> --- a/hw/mem/cxl_type3.c
> +++ b/hw/mem/cxl_type3.c
> @@ -320,13 +320,28 @@ static void hdm_decoder_commit(CXLType3Dev *ct3d, int which)
>   
>       ctrl = ldl_le_p(cache_mem + R_CXL_HDM_DECODER0_CTRL);
>       /* TODO: Sanity checks that the decoder is possible */
> -    ctrl = FIELD_DP32(ctrl, CXL_HDM_DECODER0_CTRL, COMMIT, 0);
>       ctrl = FIELD_DP32(ctrl, CXL_HDM_DECODER0_CTRL, ERR, 0);
>       ctrl = FIELD_DP32(ctrl, CXL_HDM_DECODER0_CTRL, COMMITTED, 1);
>   
>       stl_le_p(cache_mem + R_CXL_HDM_DECODER0_CTRL, ctrl);
>   }
>   
> +static void hdm_decoder_uncommit(CXLType3Dev *ct3d, int which)
> +{
> +    ComponentRegisters *cregs = &ct3d->cxl_cstate.crb;
> +    uint32_t *cache_mem = cregs->cache_mem_registers;
> +    uint32_t ctrl;
> +
> +    assert(which == 0);
> +
> +    ctrl = ldl_le_p(cache_mem + R_CXL_HDM_DECODER0_CTRL);
> +
> +    ctrl = FIELD_DP32(ctrl, CXL_HDM_DECODER0_CTRL, ERR, 0);
> +    ctrl = FIELD_DP32(ctrl, CXL_HDM_DECODER0_CTRL, COMMITTED, 0);
> +
> +    stl_le_p(cache_mem + R_CXL_HDM_DECODER0_CTRL, ctrl);
> +}
> +
>   static int ct3d_qmp_uncor_err_to_cxl(CxlUncorErrorType qmp_err)
>   {
>       switch (qmp_err) {
> @@ -395,6 +410,7 @@ static void ct3d_reg_write(void *opaque, hwaddr offset, uint64_t value,
>       CXLType3Dev *ct3d = container_of(cxl_cstate, CXLType3Dev, cxl_cstate);
>       uint32_t *cache_mem = cregs->cache_mem_registers;
>       bool should_commit = false;
> +    bool should_uncommit = false;
>       int which_hdm = -1;
>   
>       assert(size == 4);
> @@ -403,6 +419,7 @@ static void ct3d_reg_write(void *opaque, hwaddr offset, uint64_t value,
>       switch (offset) {
>       case A_CXL_HDM_DECODER0_CTRL:
>           should_commit = FIELD_EX32(value, CXL_HDM_DECODER0_CTRL, COMMIT);
> +        should_uncommit = !should_commit;
>           which_hdm = 0;
>           break;
>       case A_CXL_RAS_UNC_ERR_STATUS:
> @@ -489,6 +506,8 @@ static void ct3d_reg_write(void *opaque, hwaddr offset, uint64_t value,
>       stl_le_p((uint8_t *)cache_mem + offset, value);
>       if (should_commit) {
>           hdm_decoder_commit(ct3d, which_hdm);
> +    } else if (should_uncommit) {
> +        hdm_decoder_uncommit(ct3d, which_hdm);
>       }
>   }
>
diff mbox series

Patch

diff --git a/hw/cxl/cxl-component-utils.c b/hw/cxl/cxl-component-utils.c
index a3e6cf75cf..378f1082ce 100644
--- a/hw/cxl/cxl-component-utils.c
+++ b/hw/cxl/cxl-component-utils.c
@@ -38,19 +38,23 @@  static void dumb_hdm_handler(CXLComponentState *cxl_cstate, hwaddr offset,
     ComponentRegisters *cregs = &cxl_cstate->crb;
     uint32_t *cache_mem = cregs->cache_mem_registers;
     bool should_commit = false;
+    bool should_uncommit = false;
 
     switch (offset) {
     case A_CXL_HDM_DECODER0_CTRL:
         should_commit = FIELD_EX32(value, CXL_HDM_DECODER0_CTRL, COMMIT);
+        should_uncommit = !should_commit;
         break;
     default:
         break;
     }
 
     if (should_commit) {
-        value = FIELD_DP32(value, CXL_HDM_DECODER0_CTRL, COMMIT, 0);
         value = FIELD_DP32(value, CXL_HDM_DECODER0_CTRL, ERR, 0);
         value = FIELD_DP32(value, CXL_HDM_DECODER0_CTRL, COMMITTED, 1);
+    } else if (should_uncommit) {
+        value = FIELD_DP32(value, CXL_HDM_DECODER0_CTRL, ERR, 0);
+        value = FIELD_DP32(value, CXL_HDM_DECODER0_CTRL, COMMITTED, 0);
     }
     stl_le_p((uint8_t *)cache_mem + offset, value);
 }
diff --git a/hw/mem/cxl_type3.c b/hw/mem/cxl_type3.c
index 846089ccda..9598d584ac 100644
--- a/hw/mem/cxl_type3.c
+++ b/hw/mem/cxl_type3.c
@@ -320,13 +320,28 @@  static void hdm_decoder_commit(CXLType3Dev *ct3d, int which)
 
     ctrl = ldl_le_p(cache_mem + R_CXL_HDM_DECODER0_CTRL);
     /* TODO: Sanity checks that the decoder is possible */
-    ctrl = FIELD_DP32(ctrl, CXL_HDM_DECODER0_CTRL, COMMIT, 0);
     ctrl = FIELD_DP32(ctrl, CXL_HDM_DECODER0_CTRL, ERR, 0);
     ctrl = FIELD_DP32(ctrl, CXL_HDM_DECODER0_CTRL, COMMITTED, 1);
 
     stl_le_p(cache_mem + R_CXL_HDM_DECODER0_CTRL, ctrl);
 }
 
+static void hdm_decoder_uncommit(CXLType3Dev *ct3d, int which)
+{
+    ComponentRegisters *cregs = &ct3d->cxl_cstate.crb;
+    uint32_t *cache_mem = cregs->cache_mem_registers;
+    uint32_t ctrl;
+
+    assert(which == 0);
+
+    ctrl = ldl_le_p(cache_mem + R_CXL_HDM_DECODER0_CTRL);
+
+    ctrl = FIELD_DP32(ctrl, CXL_HDM_DECODER0_CTRL, ERR, 0);
+    ctrl = FIELD_DP32(ctrl, CXL_HDM_DECODER0_CTRL, COMMITTED, 0);
+
+    stl_le_p(cache_mem + R_CXL_HDM_DECODER0_CTRL, ctrl);
+}
+
 static int ct3d_qmp_uncor_err_to_cxl(CxlUncorErrorType qmp_err)
 {
     switch (qmp_err) {
@@ -395,6 +410,7 @@  static void ct3d_reg_write(void *opaque, hwaddr offset, uint64_t value,
     CXLType3Dev *ct3d = container_of(cxl_cstate, CXLType3Dev, cxl_cstate);
     uint32_t *cache_mem = cregs->cache_mem_registers;
     bool should_commit = false;
+    bool should_uncommit = false;
     int which_hdm = -1;
 
     assert(size == 4);
@@ -403,6 +419,7 @@  static void ct3d_reg_write(void *opaque, hwaddr offset, uint64_t value,
     switch (offset) {
     case A_CXL_HDM_DECODER0_CTRL:
         should_commit = FIELD_EX32(value, CXL_HDM_DECODER0_CTRL, COMMIT);
+        should_uncommit = !should_commit;
         which_hdm = 0;
         break;
     case A_CXL_RAS_UNC_ERR_STATUS:
@@ -489,6 +506,8 @@  static void ct3d_reg_write(void *opaque, hwaddr offset, uint64_t value,
     stl_le_p((uint8_t *)cache_mem + offset, value);
     if (should_commit) {
         hdm_decoder_commit(ct3d, which_hdm);
+    } else if (should_uncommit) {
+        hdm_decoder_uncommit(ct3d, which_hdm);
     }
 }