@@ -56,6 +56,7 @@ typedef struct PCMachineState {
SGXEPCState sgx_epc;
CXLState cxl_devices_state;
+ hwaddr i2c_base;
} PCMachineState;
#define PC_MACHINE_ACPI_DEVICE_PROP "acpi-device"
@@ -1424,6 +1424,68 @@ static void build_acpi0017(Aml *table)
aml_append(table, scope);
}
+static void acpi_dsdt_add_mctp(Aml *scope, PCMachineState *pcms)
+{
+ uint32_t interrupt = 7;
+ Aml *main_dev = aml_device("MCTP");
+ Aml *sub_dev = aml_device("MCTS");
+ Aml *dsd_pkg = aml_package(2);
+ Aml *props_pkg = aml_package(3);
+ Aml *pkg = aml_package(2);
+ Aml *crs = aml_resource_template();
+
+ aml_append(main_dev, aml_name_decl("_HID", aml_string("PRP0001")));
+
+ aml_append(pkg, aml_string("compatible"));
+ aml_append(pkg, aml_string("aspeed,ast2600-i2c-bus"));
+ aml_append(props_pkg, pkg);
+
+ pkg = aml_package(2);
+ aml_append(pkg, aml_string("bus-frequency"));
+ aml_append(pkg, aml_int(400000));
+ aml_append(props_pkg, pkg);
+
+ pkg = aml_package(2);
+ aml_append(pkg, aml_string("mctp-controller"));
+ aml_append(pkg, aml_int(1));
+ aml_append(props_pkg, pkg);
+
+ aml_append(dsd_pkg, aml_touuid("DAFFD814-6EBA-4D8C-8A91-BC9BBF4AA301"));
+ aml_append(dsd_pkg, props_pkg);
+ aml_append(main_dev, aml_name_decl("_DSD", dsd_pkg));
+
+ aml_append(crs, aml_qword_memory(AML_POS_DECODE, AML_MIN_FIXED,
+ AML_MAX_FIXED, AML_NON_CACHEABLE,
+ AML_READ_WRITE, 0, pcms->i2c_base + 0x80,
+ pcms->i2c_base + 0x80 + 0x80 - 1,
+ 0, 0x80));
+ aml_append(crs,
+ aml_interrupt(AML_CONSUMER, AML_LEVEL, AML_ACTIVE_HIGH,
+ AML_SHARED, &interrupt, 1));
+ aml_append(main_dev, aml_name_decl("_CRS", crs));
+
+ aml_append(sub_dev, aml_name_decl("_HID", aml_string("PRP0001")));
+
+ dsd_pkg = aml_package(2);
+ aml_append(dsd_pkg, aml_touuid("DAFFD814-6EBA-4D8C-8A91-BC9BBF4AA301"));
+
+ props_pkg = aml_package(1);
+
+ pkg = aml_package(2);
+ aml_append(pkg, aml_string("compatible"));
+ aml_append(pkg, aml_string("mctp-i2c-controller"));
+ aml_append(props_pkg, pkg);
+ aml_append(dsd_pkg, props_pkg);
+
+ crs = aml_resource_template();
+ aml_append(crs, aml_i2c_slv_serial_bus_device(0x50, "\\_SB.MCTP"));
+ aml_append(sub_dev, aml_name_decl("_CRS", crs));
+ aml_append(sub_dev, aml_name_decl("_DSD", dsd_pkg));
+
+ aml_append(scope, main_dev);
+ aml_append(scope, sub_dev);
+}
+
/*
* Precompute the crs ranges and bus numbers that will be used in PXB entries
* in PXB SSDT.
@@ -1652,6 +1714,9 @@ build_dsdt(GArray *table_data, BIOSLinker *linker,
build_hpet_aml(dsdt);
}
+ sb_scope = aml_scope("_SB");
+ acpi_dsdt_add_mctp(sb_scope, pcms);
+ aml_append(dsdt, sb_scope);
if (vmbus_bridge) {
sb_scope = aml_scope("_SB");
aml_append(sb_scope, build_vmbus_device_aml(vmbus_bridge));
@@ -93,6 +93,7 @@
#include "hw/i386/kvm/xen_evtchn.h"
#include "hw/i386/kvm/xen_gnttab.h"
#include "hw/i386/kvm/xen_xenstore.h"
+#include "hw/i2c/aspeed_i2c.h"
#include "sysemu/replay.h"
#include "target/i386/cpu.h"
#include "e820_memory_layout.h"
@@ -1074,6 +1075,8 @@ void pc_memory_init(PCMachineState *pcms,
memory_region_init(mr, OBJECT(machine), "cxl_host_reg", cxl_size);
memory_region_add_subregion(system_memory, cxl_base, mr);
cxl_resv_end = cxl_base + cxl_size;
+ pcms->i2c_base = cxl_resv_end - 0x4000;
+
if (pcms->cxl_devices_state.fixed_windows) {
hwaddr cxl_fmw_base;
GList *it;
@@ -1157,7 +1160,7 @@ uint64_t pc_pci_hole64_start(void)
ram_addr_t size = 0;
if (pcms->cxl_devices_state.is_enabled) {
- hole64_start = pc_get_cxl_range_end(pcms);
+ hole64_start = pc_get_cxl_range_end(pcms) + 0x4000;
} else if (pcmc->has_reserved_memory && (ms->ram_size < ms->maxram_size)) {
pc_get_device_memory_range(pcms, &hole64_start, &size);
if (!pcmc->broken_reserved_end) {
@@ -1354,6 +1357,21 @@ void pc_basic_device_init(struct PCMachineState *pcms,
/* Super I/O */
pc_superio_init(isa_bus, create_fdctrl, pcms->i8042_enabled,
pcms->vmport != ON_OFF_AUTO_ON);
+
+ {
+ AspeedI2CState *aspeed_i2c;
+ struct DeviceState *dev;
+
+ dev = qdev_new("aspeed.i2c-ast2600");
+ aspeed_i2c = ASPEED_I2C(dev);
+ object_property_set_link(OBJECT(dev), "dram",
+ OBJECT(MACHINE(pcms)->ram), &error_fatal);
+ sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal);
+ sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, pcms->i2c_base);
+ /* Hack ;) - Steal unused interrupt 7 */
+ sysbus_connect_irq(SYS_BUS_DEVICE(&aspeed_i2c->busses[0]), 0,
+ x86ms->gsi[7]);
+ }
}
void pc_nic_init(PCMachineClass *pcmc, ISABus *isa_bus, PCIBus *pci_bus)
CXL devices provide a standard Fabric Management API - FM-API. See CXL specification r3.0 from https://www.computeexpresslink.org In many real setups that will be used by a separate host from the one actually using the CXL devices (BMC or similar) but it is helpful to be able to use the main CXL emulation and the Fabric Management emulation on a single host. This 'hack' enables that (with minor kernel driver changes). There are many many things wrong with how this is done but for now it enables use of this aspeed controller with ACPI FW on an x86 host. That is useful for testing MCTP over I2C. If anyone has either: 1) Docs for an I2C controller with MCTP support that might actually appear on an x86 host. 2) A nice solution for how wrap this up in a device whilst minimising kernel changes. 3) A guide / reference example to how to do the interrupt 'right' (I'm an ARM focused developer so got lost in the x86 interrupt stuff). then let me know. For now this works and I will carry it out of tree on gitlab.com/jic23/qemu. DSDT blob - as this is a hack I haven't included test updates Scope (_SB) { Device (MCTP) { Name (_HID, "PRP0001") // _HID: Hardware ID Name (_DSD, Package (0x02) // _DSD: Device-Specific Data { ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301") /* Device Properties for _DSD */, Package (0x03) { Package (0x02) { "compatible", "aspeed,ast2600-i2c-bus" }, Package (0x02) { "bus-frequency", 0x00061A80 }, Package (0x02) { "mctp-controller", One } } }) Name (_CRS, ResourceTemplate () // _CRS: Current Resource Settings { QWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, NonCacheable, ReadWrite, 0x0000000000000000, // Granularity 0x00000004800FC080, // Range Minimum 0x00000004800FC0FF, // Range Maximum 0x0000000000000000, // Translation Offset 0x0000000000000080, // Length ,, , AddressRangeMemory, TypeStatic) Interrupt (ResourceConsumer, Level, ActiveHigh, Shared, ,, ) { 0x00000007, } }) } Device (MCTS) { Name (_HID, "PRP0001") // _HID: Hardware ID Name (_CRS, ResourceTemplate () // _CRS: Current Resource Settings { I2cSerialBusV2 (0x0050, DeviceInitiated, 0x000186A0, AddressingMode7Bit, "\\_SB.MCTP", 0x00, ResourceProducer, , Exclusive, ) }) Name (_DSD, Package (0x02) // _DSD: Device-Specific Data { ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301") /* Device Properties for _DSD */, Package (0x01) { Package (0x02) { "compatible", "mctp-i2c-controller" } } }) } } To add devices to the bus use something like: -device i2c_mctp_cxl_switch,bus=aspeed.i2c.bus.0,address=4,target=us0 Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> --- include/hw/i386/pc.h | 1 + hw/i386/acpi-build.c | 65 ++++++++++++++++++++++++++++++++++++++++++++ hw/i386/pc.c | 20 +++++++++++++- 3 files changed, 85 insertions(+), 1 deletion(-)