| Message ID | 20240816-dcd-type2-upstream-v3-6-7c9b96cba6d7@intel.com |
|---|---|
| State | Superseded |
| Headers | show |
| Series | DCD: Add support for Dynamic Capacity Devices (DCD) | expand |
On 8/16/24 7:44 AM, ira.weiny@intel.com wrote: > From: Navneet Singh <navneet.singh@intel.com> > > Devices which optionally support Dynamic Capacity (DC) are configured > via mailbox commands. CXL 3.1 requires the host to issue the Get DC > Configuration command in order to properly configure DCDs. Without the > Get DC Configuration command DCD can't be supported. > > Implement the DC mailbox commands as specified in CXL 3.1 section > 8.2.9.9.9 (opcodes 48XXh) to read and store the DCD configuration > information. Disable DCD if DCD is not supported. Leverage the Get DC > Configuration command supported bit to indicate if DCD support. > > Linux has no use for the trailing fields of the Get Dynamic Capacity > Configuration Output Payload (Total number of supported extents, number > of available extents, total number of supported tags, and number of > available tags). Avoid defining those fields to use the more useful > dynamic C array. > > Cc: "Li, Ming" <ming4.li@intel.com> > Signed-off-by: Navneet Singh <navneet.singh@intel.com> > Co-developed-by: Ira Weiny <ira.weiny@intel.com> > Signed-off-by: Ira Weiny <ira.weiny@intel.com> > > --- > Changes: > [Li, Ming: Fix bug in total_bytes calculation] > [iweiny: update commit message] > [Jonathan: fix formatting] > [Jonathan: Define block line size] > [Jonathan/Fan: use regions returned field instead of macro in get config] > [Jørgen: Rename memdev state range variables] > [Jonathan: adjust use of rc in cxl_dev_dynamic_capacity_identify()] > [Jonathan: white space cleanup] > [fan: make a comment about the trailing configuration output fields] > --- > drivers/cxl/core/mbox.c | 171 +++++++++++++++++++++++++++++++++++++++++++++++- > drivers/cxl/cxlmem.h | 64 +++++++++++++++++- > drivers/cxl/pci.c | 4 ++ > 3 files changed, 237 insertions(+), 2 deletions(-) > > diff --git a/drivers/cxl/core/mbox.c b/drivers/cxl/core/mbox.c > index 8eb196858abe..68c26c4be91a 100644 > --- a/drivers/cxl/core/mbox.c > +++ b/drivers/cxl/core/mbox.c > @@ -1157,7 +1157,7 @@ int cxl_dev_state_identify(struct cxl_memdev_state *mds) > if (rc < 0) > return rc; > > - mds->total_bytes = > + mds->static_bytes = > le64_to_cpu(id.total_capacity) * CXL_CAPACITY_MULTIPLIER; > mds->volatile_only_bytes = > le64_to_cpu(id.volatile_capacity) * CXL_CAPACITY_MULTIPLIER; > @@ -1264,6 +1264,159 @@ int cxl_mem_sanitize(struct cxl_memdev *cxlmd, u16 cmd) > return rc; > } > > +static int cxl_dc_save_region_info(struct cxl_memdev_state *mds, u8 index, > + struct cxl_dc_region_config *region_config) > +{ > + struct cxl_dc_region_info *dcr = &mds->dc_region[index]; > + struct device *dev = mds->cxlds.dev; > + > + dcr->base = le64_to_cpu(region_config->region_base); > + dcr->decode_len = le64_to_cpu(region_config->region_decode_length); > + dcr->decode_len *= CXL_CAPACITY_MULTIPLIER; > + dcr->len = le64_to_cpu(region_config->region_length); > + dcr->blk_size = le64_to_cpu(region_config->region_block_size); > + dcr->dsmad_handle = le32_to_cpu(region_config->region_dsmad_handle); > + dcr->flags = region_config->flags; > + snprintf(dcr->name, CXL_DC_REGION_STRLEN, "dc%d", index); > + > + /* Check regions are in increasing DPA order */ > + if (index > 0) { > + struct cxl_dc_region_info *prev_dcr = &mds->dc_region[index - 1]; > + > + if ((prev_dcr->base + prev_dcr->decode_len) > dcr->base) { > + dev_err(dev, > + "DPA ordering violation for DC region %d and %d\n", > + index - 1, index); > + return -EINVAL; > + } > + } > + > + if (!IS_ALIGNED(dcr->base, SZ_256M) || > + !IS_ALIGNED(dcr->base, dcr->blk_size)) { > + dev_err(dev, "DC region %d invalid base %#llx blk size %#llx\n", > + index, dcr->base, dcr->blk_size); > + return -EINVAL; > + } > + > + if (dcr->decode_len == 0 || dcr->len == 0 || dcr->decode_len < dcr->len || > + !IS_ALIGNED(dcr->len, dcr->blk_size)) { > + dev_err(dev, "DC region %d invalid length; decode %#llx len %#llx blk size %#llx\n", > + index, dcr->decode_len, dcr->len, dcr->blk_size); > + return -EINVAL; > + } > + > + if (dcr->blk_size == 0 || dcr->blk_size % CXL_DCD_BLOCK_LINE_SIZE || > + !is_power_of_2(dcr->blk_size)) { > + dev_err(dev, "DC region %d invalid block size; %#llx\n", > + index, dcr->blk_size); > + return -EINVAL; > + } > + > + dev_dbg(dev, > + "DC region %s base %#llx length %#llx block size %#llx\n", > + dcr->name, dcr->base, dcr->decode_len, dcr->blk_size); > + > + return 0; > +} > + > +/* Returns the number of regions in dc_resp or -ERRNO */ > +static int cxl_get_dc_config(struct cxl_memdev_state *mds, u8 start_region, > + struct cxl_mbox_get_dc_config_out *dc_resp, > + size_t dc_resp_size) > +{ > + struct cxl_mbox_get_dc_config_in get_dc = (struct cxl_mbox_get_dc_config_in) { > + .region_count = CXL_MAX_DC_REGION, > + .start_region_index = start_region, > + }; > + struct cxl_mbox_cmd mbox_cmd = (struct cxl_mbox_cmd) { > + .opcode = CXL_MBOX_OP_GET_DC_CONFIG, > + .payload_in = &get_dc, > + .size_in = sizeof(get_dc), > + .size_out = dc_resp_size, > + .payload_out = dc_resp, > + .min_out = 1, > + }; > + struct device *dev = mds->cxlds.dev; > + int rc; > + > + rc = cxl_internal_send_cmd(mds, &mbox_cmd); > + if (rc < 0) > + return rc; > + > + dev_dbg(dev, "Read %d/%d DC regions\n", > + dc_resp->regions_returned, dc_resp->avail_region_count); > + return dc_resp->regions_returned; > +} > + > +/** > + * cxl_dev_dynamic_capacity_identify() - Reads the dynamic capacity > + * information from the device. > + * @mds: The memory device state > + * > + * Read Dynamic Capacity information from the device and populate the state > + * structures for later use. > + * > + * Return: 0 if identify was executed successfully, -ERRNO on error. > + */ > +int cxl_dev_dynamic_capacity_identify(struct cxl_memdev_state *mds) > +{ > + size_t dc_resp_size = mds->payload_size; > + struct device *dev = mds->cxlds.dev; > + u8 start_region, i; > + > + for (i = 0; i < CXL_MAX_DC_REGION; i++) > + snprintf(mds->dc_region[i].name, CXL_DC_REGION_STRLEN, "<nil>"); > + > + if (!cxl_dcd_supported(mds)) { > + dev_dbg(dev, "DCD not supported\n"); > + return 0; > + } This should happen before you pre-format the name string? I would assume that if DCD is not supported then the dcd name sysfs attribs would be not be visible? > + > + struct cxl_mbox_get_dc_config_out *dc_resp __free(kfree) = > + kvmalloc(dc_resp_size, GFP_KERNEL); > + if (!dc_resp) > + return -ENOMEM; > + > + start_region = 0; > + do { > + int rc, j; > + > + rc = cxl_get_dc_config(mds, start_region, dc_resp, dc_resp_size); > + if (rc < 0) { > + dev_dbg(dev, "Failed to get DC config: %d\n", rc); > + return rc; > + } > + > + mds->nr_dc_region += rc; > + > + if (mds->nr_dc_region < 1 || mds->nr_dc_region > CXL_MAX_DC_REGION) { > + dev_err(dev, "Invalid num of dynamic capacity regions %d\n", > + mds->nr_dc_region); > + return -EINVAL; > + } > + > + for (i = start_region, j = 0; i < mds->nr_dc_region; i++, j++) { This should be 'j < mds->nr_dc_region'? Otherwise if your start region say is '3' and you have '2' DC regions, you never enter the loop. Or does that not happen? I also wonder if you need to check if 'start_region + mds->nr_dc_region > CXL_MAX_DC_REGION'. > + rc = cxl_dc_save_region_info(mds, i, &dc_resp->region[j]); > + if (rc) { > + dev_dbg(dev, "Failed to save region info: %d\n", rc); > + return rc; > + } > + } > + > + start_region = mds->nr_dc_region; > + > + } while (mds->nr_dc_region < dc_resp->avail_region_count); > + > + mds->dynamic_bytes = > + mds->dc_region[mds->nr_dc_region - 1].base + > + mds->dc_region[mds->nr_dc_region - 1].decode_len - > + mds->dc_region[0].base; > + dev_dbg(dev, "Total dynamic range: %#llx\n", mds->dynamic_bytes); > + > + return 0; > +} > +EXPORT_SYMBOL_NS_GPL(cxl_dev_dynamic_capacity_identify, CXL); > + > static int add_dpa_res(struct device *dev, struct resource *parent, > struct resource *res, resource_size_t start, > resource_size_t size, const char *type) > @@ -1294,8 +1447,15 @@ int cxl_mem_create_range_info(struct cxl_memdev_state *mds) > { > struct cxl_dev_state *cxlds = &mds->cxlds; > struct device *dev = cxlds->dev; > + size_t untenanted_mem; > int rc; > > + mds->total_bytes = mds->static_bytes; > + if (mds->nr_dc_region) { > + untenanted_mem = mds->dc_region[0].base - mds->static_bytes; > + mds->total_bytes += untenanted_mem + mds->dynamic_bytes; > + } > + > if (!cxlds->media_ready) { > cxlds->dpa_res = DEFINE_RES_MEM(0, 0); > cxlds->ram_res = DEFINE_RES_MEM(0, 0); > @@ -1305,6 +1465,15 @@ int cxl_mem_create_range_info(struct cxl_memdev_state *mds) > > cxlds->dpa_res = DEFINE_RES_MEM(0, mds->total_bytes); > > + for (int i = 0; i < mds->nr_dc_region; i++) { > + struct cxl_dc_region_info *dcr = &mds->dc_region[i]; > + > + rc = add_dpa_res(dev, &cxlds->dpa_res, &cxlds->dc_res[i], > + dcr->base, dcr->decode_len, dcr->name); > + if (rc) > + return rc; > + } > + > if (mds->partition_align_bytes == 0) { > rc = add_dpa_res(dev, &cxlds->dpa_res, &cxlds->ram_res, 0, > mds->volatile_only_bytes, "ram"); > diff --git a/drivers/cxl/cxlmem.h b/drivers/cxl/cxlmem.h > index f2f8b567e0e7..b4eb8164d05d 100644 > --- a/drivers/cxl/cxlmem.h > +++ b/drivers/cxl/cxlmem.h > @@ -402,6 +402,7 @@ enum cxl_devtype { > CXL_DEVTYPE_CLASSMEM, > }; > > +#define CXL_MAX_DC_REGION 8 > /** > * struct cxl_dpa_perf - DPA performance property entry > * @dpa_range: range for DPA address > @@ -431,6 +432,8 @@ struct cxl_dpa_perf { > * @dpa_res: Overall DPA resource tree for the device > * @pmem_res: Active Persistent memory capacity configuration > * @ram_res: Active Volatile memory capacity configuration > + * @dc_res: Active Dynamic Capacity memory configuration for each possible > + * region > * @serial: PCIe Device Serial Number > * @type: Generic Memory Class device or Vendor Specific Memory device > */ > @@ -445,10 +448,22 @@ struct cxl_dev_state { > struct resource dpa_res; > struct resource pmem_res; > struct resource ram_res; > + struct resource dc_res[CXL_MAX_DC_REGION]; > u64 serial; > enum cxl_devtype type; > }; > > +#define CXL_DC_REGION_STRLEN > +struct cxl_dc_region_info { > + u64 base; > + u64 decode_len; > + u64 len; > + u64 blk_size; > + u32 dsmad_handle; > + u8 flags; > + u8 name[CXL_DC_REGION_STRLEN]; > +}; Does this need kdoc comments? > + > /** > * struct cxl_memdev_state - Generic Type-3 Memory Device Class driver data > * > @@ -466,7 +481,9 @@ struct cxl_dev_state { > * @dcd_cmds: List of DCD commands implemented by memory device > * @enabled_cmds: Hardware commands found enabled in CEL. > * @exclusive_cmds: Commands that are kernel-internal only > - * @total_bytes: sum of all possible capacities > + * @total_bytes: length of all possible capacities > + * @static_bytes: length of possible static RAM and PMEM partitions > + * @dynamic_bytes: length of possible DC partitions (DC Regions) Did this get added to the wrong struct comment header? 'cxl_dev_state' instead of 'cxl_memdev_state'? > * @volatile_only_bytes: hard volatile capacity > * @persistent_only_bytes: hard persistent capacity > * @partition_align_bytes: alignment size for partition-able capacity > @@ -476,6 +493,8 @@ struct cxl_dev_state { > * @next_persistent_bytes: persistent capacity change pending device reset > * @ram_perf: performance data entry matched to RAM partition > * @pmem_perf: performance data entry matched to PMEM partition > + * @nr_dc_region: number of DC regions implemented in the memory device > + * @dc_region: array containing info about the DC regions Did this get added to the wrong struct comment header? 'cxl_dev_state' instead of 'cxl_memdev_state'? DJ > * @event: event log driver state > * @poison: poison driver state info > * @security: security driver state info > @@ -496,6 +515,8 @@ struct cxl_memdev_state { > DECLARE_BITMAP(enabled_cmds, CXL_MEM_COMMAND_ID_MAX); > DECLARE_BITMAP(exclusive_cmds, CXL_MEM_COMMAND_ID_MAX); > u64 total_bytes; > + u64 static_bytes; > + u64 dynamic_bytes; > u64 volatile_only_bytes; > u64 persistent_only_bytes; > u64 partition_align_bytes; > @@ -507,6 +528,9 @@ struct cxl_memdev_state { > struct cxl_dpa_perf ram_perf; > struct cxl_dpa_perf pmem_perf; > > + u8 nr_dc_region; > + struct cxl_dc_region_info dc_region[CXL_MAX_DC_REGION]; > + > struct cxl_event_state event; > struct cxl_poison_state poison; > struct cxl_security_state security; > @@ -709,6 +733,32 @@ struct cxl_mbox_set_partition_info { > > #define CXL_SET_PARTITION_IMMEDIATE_FLAG BIT(0) > > +/* See CXL 3.1 Table 8-163 get dynamic capacity config Input Payload */ > +struct cxl_mbox_get_dc_config_in { > + u8 region_count; > + u8 start_region_index; > +} __packed; > + > +/* See CXL 3.1 Table 8-164 get dynamic capacity config Output Payload */ > +struct cxl_mbox_get_dc_config_out { > + u8 avail_region_count; > + u8 regions_returned; > + u8 rsvd[6]; > + /* See CXL 3.1 Table 8-165 */ > + struct cxl_dc_region_config { > + __le64 region_base; > + __le64 region_decode_length; > + __le64 region_length; > + __le64 region_block_size; > + __le32 region_dsmad_handle; > + u8 flags; > + u8 rsvd[3]; > + } __packed region[]; > + /* Trailing fields unused */ > +} __packed; > +#define CXL_DYNAMIC_CAPACITY_SANITIZE_ON_RELEASE_FLAG BIT(0) > +#define CXL_DCD_BLOCK_LINE_SIZE 0x40 > + > /* Set Timestamp CXL 3.0 Spec 8.2.9.4.2 */ > struct cxl_mbox_set_timestamp_in { > __le64 timestamp; > @@ -832,6 +882,7 @@ enum { > int cxl_internal_send_cmd(struct cxl_memdev_state *mds, > struct cxl_mbox_cmd *cmd); > int cxl_dev_state_identify(struct cxl_memdev_state *mds); > +int cxl_dev_dynamic_capacity_identify(struct cxl_memdev_state *mds); > int cxl_await_media_ready(struct cxl_dev_state *cxlds); > int cxl_enumerate_cmds(struct cxl_memdev_state *mds); > int cxl_mem_create_range_info(struct cxl_memdev_state *mds); > @@ -845,6 +896,17 @@ void cxl_event_trace_record(const struct cxl_memdev *cxlmd, > enum cxl_event_log_type type, > enum cxl_event_type event_type, > const uuid_t *uuid, union cxl_event *evt); > + > +static inline bool cxl_dcd_supported(struct cxl_memdev_state *mds) > +{ > + return test_bit(CXL_DCD_ENABLED_GET_CONFIG, mds->dcd_cmds); > +} > + > +static inline void cxl_disable_dcd(struct cxl_memdev_state *mds) > +{ > + clear_bit(CXL_DCD_ENABLED_GET_CONFIG, mds->dcd_cmds); > +} > + > int cxl_set_timestamp(struct cxl_memdev_state *mds); > int cxl_poison_state_init(struct cxl_memdev_state *mds); > int cxl_mem_get_poison(struct cxl_memdev *cxlmd, u64 offset, u64 len, > diff --git a/drivers/cxl/pci.c b/drivers/cxl/pci.c > index 3a60cd66263e..f7f03599bc83 100644 > --- a/drivers/cxl/pci.c > +++ b/drivers/cxl/pci.c > @@ -874,6 +874,10 @@ static int cxl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id) > if (rc) > return rc; > > + rc = cxl_dev_dynamic_capacity_identify(mds); > + if (rc) > + cxl_disable_dcd(mds); > + > rc = cxl_mem_create_range_info(mds); > if (rc) > return rc; >
On Fri, Aug 16, 2024 at 02:45:47PM -0700, Dave Jiang wrote: > > > On 8/16/24 7:44 AM, ira.weiny@intel.com wrote: > > From: Navneet Singh <navneet.singh@intel.com> > > > > Devices which optionally support Dynamic Capacity (DC) are configured > > via mailbox commands. CXL 3.1 requires the host to issue the Get DC > > Configuration command in order to properly configure DCDs. Without the > > Get DC Configuration command DCD can't be supported. > > > > Implement the DC mailbox commands as specified in CXL 3.1 section > > 8.2.9.9.9 (opcodes 48XXh) to read and store the DCD configuration > > information. Disable DCD if DCD is not supported. Leverage the Get DC > > Configuration command supported bit to indicate if DCD support. > > > > Linux has no use for the trailing fields of the Get Dynamic Capacity > > Configuration Output Payload (Total number of supported extents, number > > of available extents, total number of supported tags, and number of > > available tags). Avoid defining those fields to use the more useful > > dynamic C array. > > > > Cc: "Li, Ming" <ming4.li@intel.com> > > Signed-off-by: Navneet Singh <navneet.singh@intel.com> > > Co-developed-by: Ira Weiny <ira.weiny@intel.com> > > Signed-off-by: Ira Weiny <ira.weiny@intel.com> > > > > --- > > Changes: > > [Li, Ming: Fix bug in total_bytes calculation] > > [iweiny: update commit message] > > [Jonathan: fix formatting] > > [Jonathan: Define block line size] > > [Jonathan/Fan: use regions returned field instead of macro in get config] > > [Jørgen: Rename memdev state range variables] > > [Jonathan: adjust use of rc in cxl_dev_dynamic_capacity_identify()] > > [Jonathan: white space cleanup] > > [fan: make a comment about the trailing configuration output fields] > > --- > > drivers/cxl/core/mbox.c | 171 +++++++++++++++++++++++++++++++++++++++++++++++- > > drivers/cxl/cxlmem.h | 64 +++++++++++++++++- > > drivers/cxl/pci.c | 4 ++ > > 3 files changed, 237 insertions(+), 2 deletions(-) > > > > diff --git a/drivers/cxl/core/mbox.c b/drivers/cxl/core/mbox.c > > index 8eb196858abe..68c26c4be91a 100644 > > --- a/drivers/cxl/core/mbox.c > > +++ b/drivers/cxl/core/mbox.c > > @@ -1157,7 +1157,7 @@ int cxl_dev_state_identify(struct cxl_memdev_state *mds) > > if (rc < 0) > > return rc; > > > > - mds->total_bytes = > > + mds->static_bytes = > > le64_to_cpu(id.total_capacity) * CXL_CAPACITY_MULTIPLIER; > > mds->volatile_only_bytes = > > le64_to_cpu(id.volatile_capacity) * CXL_CAPACITY_MULTIPLIER; > > @@ -1264,6 +1264,159 @@ int cxl_mem_sanitize(struct cxl_memdev *cxlmd, u16 cmd) > > return rc; > > } > > > > +static int cxl_dc_save_region_info(struct cxl_memdev_state *mds, u8 index, > > + struct cxl_dc_region_config *region_config) > > +{ > > + struct cxl_dc_region_info *dcr = &mds->dc_region[index]; > > + struct device *dev = mds->cxlds.dev; > > + > > + dcr->base = le64_to_cpu(region_config->region_base); > > + dcr->decode_len = le64_to_cpu(region_config->region_decode_length); > > + dcr->decode_len *= CXL_CAPACITY_MULTIPLIER; > > + dcr->len = le64_to_cpu(region_config->region_length); > > + dcr->blk_size = le64_to_cpu(region_config->region_block_size); > > + dcr->dsmad_handle = le32_to_cpu(region_config->region_dsmad_handle); > > + dcr->flags = region_config->flags; > > + snprintf(dcr->name, CXL_DC_REGION_STRLEN, "dc%d", index); > > + > > + /* Check regions are in increasing DPA order */ > > + if (index > 0) { > > + struct cxl_dc_region_info *prev_dcr = &mds->dc_region[index - 1]; > > + > > + if ((prev_dcr->base + prev_dcr->decode_len) > dcr->base) { > > + dev_err(dev, > > + "DPA ordering violation for DC region %d and %d\n", > > + index - 1, index); > > + return -EINVAL; > > + } > > + } > > + > > + if (!IS_ALIGNED(dcr->base, SZ_256M) || > > + !IS_ALIGNED(dcr->base, dcr->blk_size)) { > > + dev_err(dev, "DC region %d invalid base %#llx blk size %#llx\n", > > + index, dcr->base, dcr->blk_size); > > + return -EINVAL; > > + } > > + > > + if (dcr->decode_len == 0 || dcr->len == 0 || dcr->decode_len < dcr->len || > > + !IS_ALIGNED(dcr->len, dcr->blk_size)) { > > + dev_err(dev, "DC region %d invalid length; decode %#llx len %#llx blk size %#llx\n", > > + index, dcr->decode_len, dcr->len, dcr->blk_size); > > + return -EINVAL; > > + } > > + > > + if (dcr->blk_size == 0 || dcr->blk_size % CXL_DCD_BLOCK_LINE_SIZE || > > + !is_power_of_2(dcr->blk_size)) { > > + dev_err(dev, "DC region %d invalid block size; %#llx\n", > > + index, dcr->blk_size); > > + return -EINVAL; > > + } > > + > > + dev_dbg(dev, > > + "DC region %s base %#llx length %#llx block size %#llx\n", > > + dcr->name, dcr->base, dcr->decode_len, dcr->blk_size); > > + > > + return 0; > > +} > > + > > +/* Returns the number of regions in dc_resp or -ERRNO */ > > +static int cxl_get_dc_config(struct cxl_memdev_state *mds, u8 start_region, > > + struct cxl_mbox_get_dc_config_out *dc_resp, > > + size_t dc_resp_size) > > +{ > > + struct cxl_mbox_get_dc_config_in get_dc = (struct cxl_mbox_get_dc_config_in) { > > + .region_count = CXL_MAX_DC_REGION, > > + .start_region_index = start_region, > > + }; > > + struct cxl_mbox_cmd mbox_cmd = (struct cxl_mbox_cmd) { > > + .opcode = CXL_MBOX_OP_GET_DC_CONFIG, > > + .payload_in = &get_dc, > > + .size_in = sizeof(get_dc), > > + .size_out = dc_resp_size, > > + .payload_out = dc_resp, > > + .min_out = 1, > > + }; > > + struct device *dev = mds->cxlds.dev; > > + int rc; > > + > > + rc = cxl_internal_send_cmd(mds, &mbox_cmd); > > + if (rc < 0) > > + return rc; > > + > > + dev_dbg(dev, "Read %d/%d DC regions\n", > > + dc_resp->regions_returned, dc_resp->avail_region_count); > > + return dc_resp->regions_returned; > > +} > > + > > +/** > > + * cxl_dev_dynamic_capacity_identify() - Reads the dynamic capacity > > + * information from the device. > > + * @mds: The memory device state > > + * > > + * Read Dynamic Capacity information from the device and populate the state > > + * structures for later use. > > + * > > + * Return: 0 if identify was executed successfully, -ERRNO on error. > > + */ > > +int cxl_dev_dynamic_capacity_identify(struct cxl_memdev_state *mds) > > +{ > > + size_t dc_resp_size = mds->payload_size; > > + struct device *dev = mds->cxlds.dev; > > + u8 start_region, i; > > + > > + for (i = 0; i < CXL_MAX_DC_REGION; i++) > > + snprintf(mds->dc_region[i].name, CXL_DC_REGION_STRLEN, "<nil>"); > > + > > + if (!cxl_dcd_supported(mds)) { > > + dev_dbg(dev, "DCD not supported\n"); > > + return 0; > > + } > > This should happen before you pre-format the name string? I would assume that if DCD is not supported then the dcd name sysfs attribs would be not be visible? > > > + > > + struct cxl_mbox_get_dc_config_out *dc_resp __free(kfree) = > > + kvmalloc(dc_resp_size, GFP_KERNEL); > > + if (!dc_resp) > > + return -ENOMEM; > > + > > + start_region = 0; > > + do { > > + int rc, j; > > + > > + rc = cxl_get_dc_config(mds, start_region, dc_resp, dc_resp_size); > > + if (rc < 0) { > > + dev_dbg(dev, "Failed to get DC config: %d\n", rc); > > + return rc; > > + } > > + > > + mds->nr_dc_region += rc; > > + > > + if (mds->nr_dc_region < 1 || mds->nr_dc_region > CXL_MAX_DC_REGION) { > > + dev_err(dev, "Invalid num of dynamic capacity regions %d\n", > > + mds->nr_dc_region); > > + return -EINVAL; > > + } > > + > > + for (i = start_region, j = 0; i < mds->nr_dc_region; i++, j++) { > > This should be 'j < mds->nr_dc_region'? Otherwise if your start region say is '3' and you have '2' DC regions, you never enter the loop. Or does that not happen? I also wonder if you need to check if 'start_region + mds->nr_dc_region > CXL_MAX_DC_REGION'. > That can not happen, start_region was updated to the number of regions has returned till now (not counting the current call), while nr_dc_region is the total number of regions returned till now (including the current call) as we update it above, so start_region should never be larger than nr_dc_region. > > + rc = cxl_dc_save_region_info(mds, i, &dc_resp->region[j]); > > + if (rc) { > > + dev_dbg(dev, "Failed to save region info: %d\n", rc); I am not sure why we sometimes use dev_err and sometimes we use dev_dbg here, if dcd is supported, error from getting dc configuration is an error to me. Fan > > + return rc; > > + } > > + } > > + > > + start_region = mds->nr_dc_region; > > + > > + } while (mds->nr_dc_region < dc_resp->avail_region_count); > > + > > + mds->dynamic_bytes = > > + mds->dc_region[mds->nr_dc_region - 1].base + > > + mds->dc_region[mds->nr_dc_region - 1].decode_len - > > + mds->dc_region[0].base; > > + dev_dbg(dev, "Total dynamic range: %#llx\n", mds->dynamic_bytes); > > + > > + return 0; > > +} > > +EXPORT_SYMBOL_NS_GPL(cxl_dev_dynamic_capacity_identify, CXL); > > + > > static int add_dpa_res(struct device *dev, struct resource *parent, > > struct resource *res, resource_size_t start, > > resource_size_t size, const char *type) > > @@ -1294,8 +1447,15 @@ int cxl_mem_create_range_info(struct cxl_memdev_state *mds) > > { > > struct cxl_dev_state *cxlds = &mds->cxlds; > > struct device *dev = cxlds->dev; > > + size_t untenanted_mem; > > int rc; > > > > + mds->total_bytes = mds->static_bytes; > > + if (mds->nr_dc_region) { > > + untenanted_mem = mds->dc_region[0].base - mds->static_bytes; > > + mds->total_bytes += untenanted_mem + mds->dynamic_bytes; > > + } > > + > > if (!cxlds->media_ready) { > > cxlds->dpa_res = DEFINE_RES_MEM(0, 0); > > cxlds->ram_res = DEFINE_RES_MEM(0, 0); > > @@ -1305,6 +1465,15 @@ int cxl_mem_create_range_info(struct cxl_memdev_state *mds) > > > > cxlds->dpa_res = DEFINE_RES_MEM(0, mds->total_bytes); > > > > + for (int i = 0; i < mds->nr_dc_region; i++) { > > + struct cxl_dc_region_info *dcr = &mds->dc_region[i]; > > + > > + rc = add_dpa_res(dev, &cxlds->dpa_res, &cxlds->dc_res[i], > > + dcr->base, dcr->decode_len, dcr->name); > > + if (rc) > > + return rc; > > + } > > + > > if (mds->partition_align_bytes == 0) { > > rc = add_dpa_res(dev, &cxlds->dpa_res, &cxlds->ram_res, 0, > > mds->volatile_only_bytes, "ram"); > > diff --git a/drivers/cxl/cxlmem.h b/drivers/cxl/cxlmem.h > > index f2f8b567e0e7..b4eb8164d05d 100644 > > --- a/drivers/cxl/cxlmem.h > > +++ b/drivers/cxl/cxlmem.h > > @@ -402,6 +402,7 @@ enum cxl_devtype { > > CXL_DEVTYPE_CLASSMEM, > > }; > > > > +#define CXL_MAX_DC_REGION 8 > > /** > > * struct cxl_dpa_perf - DPA performance property entry > > * @dpa_range: range for DPA address > > @@ -431,6 +432,8 @@ struct cxl_dpa_perf { > > * @dpa_res: Overall DPA resource tree for the device > > * @pmem_res: Active Persistent memory capacity configuration > > * @ram_res: Active Volatile memory capacity configuration > > + * @dc_res: Active Dynamic Capacity memory configuration for each possible > > + * region > > * @serial: PCIe Device Serial Number > > * @type: Generic Memory Class device or Vendor Specific Memory device > > */ > > @@ -445,10 +448,22 @@ struct cxl_dev_state { > > struct resource dpa_res; > > struct resource pmem_res; > > struct resource ram_res; > > + struct resource dc_res[CXL_MAX_DC_REGION]; > > u64 serial; > > enum cxl_devtype type; > > }; > > > > +#define CXL_DC_REGION_STRLEN > +struct cxl_dc_region_info { > > + u64 base; > > + u64 decode_len; > > + u64 len; > > + u64 blk_size; > > + u32 dsmad_handle; > > + u8 flags; > > + u8 name[CXL_DC_REGION_STRLEN]; > > +}; > > Does this need kdoc comments? > > > > + > > /** > > * struct cxl_memdev_state - Generic Type-3 Memory Device Class driver data > > * > > @@ -466,7 +481,9 @@ struct cxl_dev_state { > > * @dcd_cmds: List of DCD commands implemented by memory device > > * @enabled_cmds: Hardware commands found enabled in CEL. > > * @exclusive_cmds: Commands that are kernel-internal only > > - * @total_bytes: sum of all possible capacities > > + * @total_bytes: length of all possible capacities > > + * @static_bytes: length of possible static RAM and PMEM partitions > > + * @dynamic_bytes: length of possible DC partitions (DC Regions) > > Did this get added to the wrong struct comment header? 'cxl_dev_state' instead of 'cxl_memdev_state'? > > * @volatile_only_bytes: hard volatile capacity > > * @persistent_only_bytes: hard persistent capacity > > * @partition_align_bytes: alignment size for partition-able capacity > > @@ -476,6 +493,8 @@ struct cxl_dev_state { > > * @next_persistent_bytes: persistent capacity change pending device reset > > * @ram_perf: performance data entry matched to RAM partition > > * @pmem_perf: performance data entry matched to PMEM partition > > + * @nr_dc_region: number of DC regions implemented in the memory device > > + * @dc_region: array containing info about the DC regions > Did this get added to the wrong struct comment header? 'cxl_dev_state' instead of 'cxl_memdev_state'? > > DJ > > > * @event: event log driver state > > * @poison: poison driver state info > > * @security: security driver state info > > @@ -496,6 +515,8 @@ struct cxl_memdev_state { > > DECLARE_BITMAP(enabled_cmds, CXL_MEM_COMMAND_ID_MAX); > > DECLARE_BITMAP(exclusive_cmds, CXL_MEM_COMMAND_ID_MAX); > > u64 total_bytes; > > + u64 static_bytes; > > + u64 dynamic_bytes; > > u64 volatile_only_bytes; > > u64 persistent_only_bytes; > > u64 partition_align_bytes; > > @@ -507,6 +528,9 @@ struct cxl_memdev_state { > > struct cxl_dpa_perf ram_perf; > > struct cxl_dpa_perf pmem_perf; > > > > + u8 nr_dc_region; > > + struct cxl_dc_region_info dc_region[CXL_MAX_DC_REGION]; > > + > > struct cxl_event_state event; > > struct cxl_poison_state poison; > > struct cxl_security_state security; > > @@ -709,6 +733,32 @@ struct cxl_mbox_set_partition_info { > > > > #define CXL_SET_PARTITION_IMMEDIATE_FLAG BIT(0) > > > > +/* See CXL 3.1 Table 8-163 get dynamic capacity config Input Payload */ > > +struct cxl_mbox_get_dc_config_in { > > + u8 region_count; > > + u8 start_region_index; > > +} __packed; > > + > > +/* See CXL 3.1 Table 8-164 get dynamic capacity config Output Payload */ > > +struct cxl_mbox_get_dc_config_out { > > + u8 avail_region_count; > > + u8 regions_returned; > > + u8 rsvd[6]; > > + /* See CXL 3.1 Table 8-165 */ > > + struct cxl_dc_region_config { > > + __le64 region_base; > > + __le64 region_decode_length; > > + __le64 region_length; > > + __le64 region_block_size; > > + __le32 region_dsmad_handle; > > + u8 flags; > > + u8 rsvd[3]; > > + } __packed region[]; > > + /* Trailing fields unused */ > > +} __packed; > > +#define CXL_DYNAMIC_CAPACITY_SANITIZE_ON_RELEASE_FLAG BIT(0) > > +#define CXL_DCD_BLOCK_LINE_SIZE 0x40 > > + > > /* Set Timestamp CXL 3.0 Spec 8.2.9.4.2 */ > > struct cxl_mbox_set_timestamp_in { > > __le64 timestamp; > > @@ -832,6 +882,7 @@ enum { > > int cxl_internal_send_cmd(struct cxl_memdev_state *mds, > > struct cxl_mbox_cmd *cmd); > > int cxl_dev_state_identify(struct cxl_memdev_state *mds); > > +int cxl_dev_dynamic_capacity_identify(struct cxl_memdev_state *mds); > > int cxl_await_media_ready(struct cxl_dev_state *cxlds); > > int cxl_enumerate_cmds(struct cxl_memdev_state *mds); > > int cxl_mem_create_range_info(struct cxl_memdev_state *mds); > > @@ -845,6 +896,17 @@ void cxl_event_trace_record(const struct cxl_memdev *cxlmd, > > enum cxl_event_log_type type, > > enum cxl_event_type event_type, > > const uuid_t *uuid, union cxl_event *evt); > > + > > +static inline bool cxl_dcd_supported(struct cxl_memdev_state *mds) > > +{ > > + return test_bit(CXL_DCD_ENABLED_GET_CONFIG, mds->dcd_cmds); > > +} > > + > > +static inline void cxl_disable_dcd(struct cxl_memdev_state *mds) > > +{ > > + clear_bit(CXL_DCD_ENABLED_GET_CONFIG, mds->dcd_cmds); > > +} > > + > > int cxl_set_timestamp(struct cxl_memdev_state *mds); > > int cxl_poison_state_init(struct cxl_memdev_state *mds); > > int cxl_mem_get_poison(struct cxl_memdev *cxlmd, u64 offset, u64 len, > > diff --git a/drivers/cxl/pci.c b/drivers/cxl/pci.c > > index 3a60cd66263e..f7f03599bc83 100644 > > --- a/drivers/cxl/pci.c > > +++ b/drivers/cxl/pci.c > > @@ -874,6 +874,10 @@ static int cxl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id) > > if (rc) > > return rc; > > > > + rc = cxl_dev_dynamic_capacity_identify(mds); > > + if (rc) > > + cxl_disable_dcd(mds); > > + > > rc = cxl_mem_create_range_info(mds); > > if (rc) > > return rc; > >
Fan Ni wrote: > On Fri, Aug 16, 2024 at 02:45:47PM -0700, Dave Jiang wrote: > > > > > + > > > +/** > > > + * cxl_dev_dynamic_capacity_identify() - Reads the dynamic capacity > > > + * information from the device. > > > + * @mds: The memory device state > > > + * > > > + * Read Dynamic Capacity information from the device and populate the state > > > + * structures for later use. > > > + * > > > + * Return: 0 if identify was executed successfully, -ERRNO on error. > > > + */ > > > +int cxl_dev_dynamic_capacity_identify(struct cxl_memdev_state *mds) > > > +{ > > > + size_t dc_resp_size = mds->payload_size; > > > + struct device *dev = mds->cxlds.dev; > > > + u8 start_region, i; > > > + > > > + for (i = 0; i < CXL_MAX_DC_REGION; i++) > > > + snprintf(mds->dc_region[i].name, CXL_DC_REGION_STRLEN, "<nil>"); > > > + > > > + if (!cxl_dcd_supported(mds)) { > > > + dev_dbg(dev, "DCD not supported\n"); > > > + return 0; > > > + } > > > > This should happen before you pre-format the name string? I would assume that if DCD is not supported then the dcd name sysfs attribs would be not be visible? > > No this string is not used for sysfs. It is used to label the dpa resources... That said in review I don't recall why it was necessary to add the '<nil>' to them by default. I'm actually going to remove that and continue testing and if I recall where this was showing up I might add it back in. > > > + > > > + struct cxl_mbox_get_dc_config_out *dc_resp __free(kfree) = > > > + kvmalloc(dc_resp_size, GFP_KERNEL); > > > + if (!dc_resp) > > > + return -ENOMEM; > > > + > > > + start_region = 0; > > > + do { > > > + int rc, j; > > > + > > > + rc = cxl_get_dc_config(mds, start_region, dc_resp, dc_resp_size); > > > + if (rc < 0) { > > > + dev_dbg(dev, "Failed to get DC config: %d\n", rc); > > > + return rc; > > > + } > > > + > > > + mds->nr_dc_region += rc; > > > + > > > + if (mds->nr_dc_region < 1 || mds->nr_dc_region > CXL_MAX_DC_REGION) { > > > + dev_err(dev, "Invalid num of dynamic capacity regions %d\n", > > > + mds->nr_dc_region); > > > + return -EINVAL; > > > + } > > > + > > > + for (i = start_region, j = 0; i < mds->nr_dc_region; i++, j++) { > > > > This should be 'j < mds->nr_dc_region'? Otherwise if your start region say is '3' and you have '2' DC regions, you never enter the loop. Or does that not happen? I also wonder if you need to check if 'start_region + mds->nr_dc_region > CXL_MAX_DC_REGION'. > > > That can not happen, start_region was updated to the number of regions > has returned till now (not counting the current call), while > nr_dc_region is the total number of regions returned till now (including > the current call) as we update it above, so start_region should never be larger > than nr_dc_region. Yep. > > > > + rc = cxl_dc_save_region_info(mds, i, &dc_resp->region[j]); > > > + if (rc) { > > > + dev_dbg(dev, "Failed to save region info: %d\n", rc); > > I am not sure why we sometimes use dev_err and sometimes we use dev_dbg > here, if dcd is supported, error from getting dc configuration is an > error to me. We are trying to reduce the dev_err() use. cxl_dc_save_region_info() has dev_err() which is much more specific as to the error. At worse this is just redundant as a debug. I'll remove it because the debug output is pretty verbose too. Ira > > Fan > > > > + return rc; > > > + } > > > + } > > > + > > > + start_region = mds->nr_dc_region; > > > + > > > + } while (mds->nr_dc_region < dc_resp->avail_region_count); > > > + > > > + mds->dynamic_bytes = > > > + mds->dc_region[mds->nr_dc_region - 1].base + > > > + mds->dc_region[mds->nr_dc_region - 1].decode_len - > > > + mds->dc_region[0].base; > > > + dev_dbg(dev, "Total dynamic range: %#llx\n", mds->dynamic_bytes); > > > + > > > + return 0; > > > +} > > > +EXPORT_SYMBOL_NS_GPL(cxl_dev_dynamic_capacity_identify, CXL); > > > + > > > static int add_dpa_res(struct device *dev, struct resource *parent, > > > struct resource *res, resource_size_t start, > > > resource_size_t size, const char *type) > > > @@ -1294,8 +1447,15 @@ int cxl_mem_create_range_info(struct cxl_memdev_state *mds) > > > { > > > struct cxl_dev_state *cxlds = &mds->cxlds; > > > struct device *dev = cxlds->dev; > > > + size_t untenanted_mem; > > > int rc; > > > > > > + mds->total_bytes = mds->static_bytes; > > > + if (mds->nr_dc_region) { > > > + untenanted_mem = mds->dc_region[0].base - mds->static_bytes; > > > + mds->total_bytes += untenanted_mem + mds->dynamic_bytes; > > > + } > > > + > > > if (!cxlds->media_ready) { > > > cxlds->dpa_res = DEFINE_RES_MEM(0, 0); > > > cxlds->ram_res = DEFINE_RES_MEM(0, 0); > > > @@ -1305,6 +1465,15 @@ int cxl_mem_create_range_info(struct cxl_memdev_state *mds) > > > > > > cxlds->dpa_res = DEFINE_RES_MEM(0, mds->total_bytes); > > > > > > + for (int i = 0; i < mds->nr_dc_region; i++) { > > > + struct cxl_dc_region_info *dcr = &mds->dc_region[i]; > > > + > > > + rc = add_dpa_res(dev, &cxlds->dpa_res, &cxlds->dc_res[i], > > > + dcr->base, dcr->decode_len, dcr->name); > > > + if (rc) > > > + return rc; > > > + } > > > + > > > if (mds->partition_align_bytes == 0) { > > > rc = add_dpa_res(dev, &cxlds->dpa_res, &cxlds->ram_res, 0, > > > mds->volatile_only_bytes, "ram"); > > > diff --git a/drivers/cxl/cxlmem.h b/drivers/cxl/cxlmem.h > > > index f2f8b567e0e7..b4eb8164d05d 100644 > > > --- a/drivers/cxl/cxlmem.h > > > +++ b/drivers/cxl/cxlmem.h > > > @@ -402,6 +402,7 @@ enum cxl_devtype { > > > CXL_DEVTYPE_CLASSMEM, > > > }; > > > > > > +#define CXL_MAX_DC_REGION 8 > > > /** > > > * struct cxl_dpa_perf - DPA performance property entry > > > * @dpa_range: range for DPA address > > > @@ -431,6 +432,8 @@ struct cxl_dpa_perf { > > > * @dpa_res: Overall DPA resource tree for the device > > > * @pmem_res: Active Persistent memory capacity configuration > > > * @ram_res: Active Volatile memory capacity configuration > > > + * @dc_res: Active Dynamic Capacity memory configuration for each possible > > > + * region > > > * @serial: PCIe Device Serial Number > > > * @type: Generic Memory Class device or Vendor Specific Memory device > > > */ > > > @@ -445,10 +448,22 @@ struct cxl_dev_state { > > > struct resource dpa_res; > > > struct resource pmem_res; > > > struct resource ram_res; > > > + struct resource dc_res[CXL_MAX_DC_REGION]; > > > u64 serial; > > > enum cxl_devtype type; > > > }; > > > > > > +#define CXL_DC_REGION_STRLEN > +struct cxl_dc_region_info { > > > + u64 base; > > > + u64 decode_len; > > > + u64 len; > > > + u64 blk_size; > > > + u32 dsmad_handle; > > > + u8 flags; > > > + u8 name[CXL_DC_REGION_STRLEN]; > > > +}; > > > > Does this need kdoc comments? > > > > > > > + > > > /** > > > * struct cxl_memdev_state - Generic Type-3 Memory Device Class driver data > > > * > > > @@ -466,7 +481,9 @@ struct cxl_dev_state { > > > * @dcd_cmds: List of DCD commands implemented by memory device > > > * @enabled_cmds: Hardware commands found enabled in CEL. > > > * @exclusive_cmds: Commands that are kernel-internal only > > > - * @total_bytes: sum of all possible capacities > > > + * @total_bytes: length of all possible capacities > > > + * @static_bytes: length of possible static RAM and PMEM partitions > > > + * @dynamic_bytes: length of possible DC partitions (DC Regions) > > > > Did this get added to the wrong struct comment header? 'cxl_dev_state' instead of 'cxl_memdev_state'? > > > * @volatile_only_bytes: hard volatile capacity > > > * @persistent_only_bytes: hard persistent capacity > > > * @partition_align_bytes: alignment size for partition-able capacity > > > @@ -476,6 +493,8 @@ struct cxl_dev_state { > > > * @next_persistent_bytes: persistent capacity change pending device reset > > > * @ram_perf: performance data entry matched to RAM partition > > > * @pmem_perf: performance data entry matched to PMEM partition > > > + * @nr_dc_region: number of DC regions implemented in the memory device > > > + * @dc_region: array containing info about the DC regions > > Did this get added to the wrong struct comment header? 'cxl_dev_state' instead of 'cxl_memdev_state'? > > > > DJ > > > > > * @event: event log driver state > > > * @poison: poison driver state info > > > * @security: security driver state info > > > @@ -496,6 +515,8 @@ struct cxl_memdev_state { > > > DECLARE_BITMAP(enabled_cmds, CXL_MEM_COMMAND_ID_MAX); > > > DECLARE_BITMAP(exclusive_cmds, CXL_MEM_COMMAND_ID_MAX); > > > u64 total_bytes; > > > + u64 static_bytes; > > > + u64 dynamic_bytes; > > > u64 volatile_only_bytes; > > > u64 persistent_only_bytes; > > > u64 partition_align_bytes; > > > @@ -507,6 +528,9 @@ struct cxl_memdev_state { > > > struct cxl_dpa_perf ram_perf; > > > struct cxl_dpa_perf pmem_perf; > > > > > > + u8 nr_dc_region; > > > + struct cxl_dc_region_info dc_region[CXL_MAX_DC_REGION]; > > > + > > > struct cxl_event_state event; > > > struct cxl_poison_state poison; > > > struct cxl_security_state security; > > > @@ -709,6 +733,32 @@ struct cxl_mbox_set_partition_info { > > > > > > #define CXL_SET_PARTITION_IMMEDIATE_FLAG BIT(0) > > > > > > +/* See CXL 3.1 Table 8-163 get dynamic capacity config Input Payload */ > > > +struct cxl_mbox_get_dc_config_in { > > > + u8 region_count; > > > + u8 start_region_index; > > > +} __packed; > > > + > > > +/* See CXL 3.1 Table 8-164 get dynamic capacity config Output Payload */ > > > +struct cxl_mbox_get_dc_config_out { > > > + u8 avail_region_count; > > > + u8 regions_returned; > > > + u8 rsvd[6]; > > > + /* See CXL 3.1 Table 8-165 */ > > > + struct cxl_dc_region_config { > > > + __le64 region_base; > > > + __le64 region_decode_length; > > > + __le64 region_length; > > > + __le64 region_block_size; > > > + __le32 region_dsmad_handle; > > > + u8 flags; > > > + u8 rsvd[3]; > > > + } __packed region[]; > > > + /* Trailing fields unused */ > > > +} __packed; > > > +#define CXL_DYNAMIC_CAPACITY_SANITIZE_ON_RELEASE_FLAG BIT(0) > > > +#define CXL_DCD_BLOCK_LINE_SIZE 0x40 > > > + > > > /* Set Timestamp CXL 3.0 Spec 8.2.9.4.2 */ > > > struct cxl_mbox_set_timestamp_in { > > > __le64 timestamp; > > > @@ -832,6 +882,7 @@ enum { > > > int cxl_internal_send_cmd(struct cxl_memdev_state *mds, > > > struct cxl_mbox_cmd *cmd); > > > int cxl_dev_state_identify(struct cxl_memdev_state *mds); > > > +int cxl_dev_dynamic_capacity_identify(struct cxl_memdev_state *mds); > > > int cxl_await_media_ready(struct cxl_dev_state *cxlds); > > > int cxl_enumerate_cmds(struct cxl_memdev_state *mds); > > > int cxl_mem_create_range_info(struct cxl_memdev_state *mds); > > > @@ -845,6 +896,17 @@ void cxl_event_trace_record(const struct cxl_memdev *cxlmd, > > > enum cxl_event_log_type type, > > > enum cxl_event_type event_type, > > > const uuid_t *uuid, union cxl_event *evt); > > > + > > > +static inline bool cxl_dcd_supported(struct cxl_memdev_state *mds) > > > +{ > > > + return test_bit(CXL_DCD_ENABLED_GET_CONFIG, mds->dcd_cmds); > > > +} > > > + > > > +static inline void cxl_disable_dcd(struct cxl_memdev_state *mds) > > > +{ > > > + clear_bit(CXL_DCD_ENABLED_GET_CONFIG, mds->dcd_cmds); > > > +} > > > + > > > int cxl_set_timestamp(struct cxl_memdev_state *mds); > > > int cxl_poison_state_init(struct cxl_memdev_state *mds); > > > int cxl_mem_get_poison(struct cxl_memdev *cxlmd, u64 offset, u64 len, > > > diff --git a/drivers/cxl/pci.c b/drivers/cxl/pci.c > > > index 3a60cd66263e..f7f03599bc83 100644 > > > --- a/drivers/cxl/pci.c > > > +++ b/drivers/cxl/pci.c > > > @@ -874,6 +874,10 @@ static int cxl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id) > > > if (rc) > > > return rc; > > > > > > + rc = cxl_dev_dynamic_capacity_identify(mds); > > > + if (rc) > > > + cxl_disable_dcd(mds); > > > + > > > rc = cxl_mem_create_range_info(mds); > > > if (rc) > > > return rc; > > > >
Fan Ni wrote: > On Fri, Aug 16, 2024 at 02:45:47PM -0700, Dave Jiang wrote: [snip] > > > + > > > +/** > > > + * cxl_dev_dynamic_capacity_identify() - Reads the dynamic capacity > > > + * information from the device. > > > + * @mds: The memory device state > > > + * > > > + * Read Dynamic Capacity information from the device and populate the state > > > + * structures for later use. > > > + * > > > + * Return: 0 if identify was executed successfully, -ERRNO on error. > > > + */ > > > +int cxl_dev_dynamic_capacity_identify(struct cxl_memdev_state *mds) > > > +{ > > > + size_t dc_resp_size = mds->payload_size; > > > + struct device *dev = mds->cxlds.dev; > > > + u8 start_region, i; > > > + > > > + for (i = 0; i < CXL_MAX_DC_REGION; i++) > > > + snprintf(mds->dc_region[i].name, CXL_DC_REGION_STRLEN, "<nil>"); > > > + > > > + if (!cxl_dcd_supported(mds)) { > > > + dev_dbg(dev, "DCD not supported\n"); > > > + return 0; > > > + } > > > > This should happen before you pre-format the name string? I would assume that if DCD is not supported then the dcd name sysfs attribs would be not be visible? > > No this string is not used for sysfs. It is used to label the dpa resources... That said in review I don't recall why it was necessary to add the '<nil>' to them by default. I'm actually going to remove that and continue testing and if I recall where this was showing up I might add it back in. > > > + > > > + struct cxl_mbox_get_dc_config_out *dc_resp __free(kfree) = > > > + kvmalloc(dc_resp_size, GFP_KERNEL); > > > + if (!dc_resp) > > > + return -ENOMEM; > > > + > > > + start_region = 0; > > > + do { > > > + int rc, j; > > > + > > > + rc = cxl_get_dc_config(mds, start_region, dc_resp, dc_resp_size); > > > + if (rc < 0) { > > > + dev_dbg(dev, "Failed to get DC config: %d\n", rc); > > > + return rc; > > > + } > > > + > > > + mds->nr_dc_region += rc; > > > + > > > + if (mds->nr_dc_region < 1 || mds->nr_dc_region > CXL_MAX_DC_REGION) { > > > + dev_err(dev, "Invalid num of dynamic capacity regions %d\n", > > > + mds->nr_dc_region); > > > + return -EINVAL; > > > + } > > > + > > > + for (i = start_region, j = 0; i < mds->nr_dc_region; i++, j++) { > > > > This should be 'j < mds->nr_dc_region'? Otherwise if your start region say is '3' and you have '2' DC regions, you never enter the loop. Or does that not happen? I also wonder if you need to check if 'start_region + mds->nr_dc_region > CXL_MAX_DC_REGION'. > > > That can not happen, start_region was updated to the number of regions > has returned till now (not counting the current call), while > nr_dc_region is the total number of regions returned till now (including > the current call) as we update it above, so start_region should never be larger > than nr_dc_region. Yep. > > > > + rc = cxl_dc_save_region_info(mds, i, &dc_resp->region[j]); > > > + if (rc) { > > > + dev_dbg(dev, "Failed to save region info: %d\n", rc); > > I am not sure why we sometimes use dev_err and sometimes we use dev_dbg > here, if dcd is supported, error from getting dc configuration is an > error to me. We are trying to reduce the dev_err() use. cxl_dc_save_region_info() has dev_err() which is much more specific as to the error. At worse this is just redundant as a debug. I'll remove it because the debug output is pretty verbose too. Ira > > Fan [snip]
On Fri, 16 Aug 2024 09:44:14 -0500 ira.weiny@intel.com wrote: > From: Navneet Singh <navneet.singh@intel.com> > > Devices which optionally support Dynamic Capacity (DC) are configured > via mailbox commands. CXL 3.1 requires the host to issue the Get DC > Configuration command in order to properly configure DCDs. Without the > Get DC Configuration command DCD can't be supported. > > Implement the DC mailbox commands as specified in CXL 3.1 section > 8.2.9.9.9 (opcodes 48XXh) to read and store the DCD configuration > information. Disable DCD if DCD is not supported. Leverage the Get DC > Configuration command supported bit to indicate if DCD support. > > Linux has no use for the trailing fields of the Get Dynamic Capacity > Configuration Output Payload (Total number of supported extents, number > of available extents, total number of supported tags, and number of > available tags). Avoid defining those fields to use the more useful > dynamic C array. > > Cc: "Li, Ming" <ming4.li@intel.com> > Signed-off-by: Navneet Singh <navneet.singh@intel.com> > Co-developed-by: Ira Weiny <ira.weiny@intel.com> > Signed-off-by: Ira Weiny <ira.weiny@intel.com> LGTM Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> If you can get rid of the <nil> thing even better.
diff --git a/drivers/cxl/core/mbox.c b/drivers/cxl/core/mbox.c index 8eb196858abe..68c26c4be91a 100644 --- a/drivers/cxl/core/mbox.c +++ b/drivers/cxl/core/mbox.c @@ -1157,7 +1157,7 @@ int cxl_dev_state_identify(struct cxl_memdev_state *mds) if (rc < 0) return rc; - mds->total_bytes = + mds->static_bytes = le64_to_cpu(id.total_capacity) * CXL_CAPACITY_MULTIPLIER; mds->volatile_only_bytes = le64_to_cpu(id.volatile_capacity) * CXL_CAPACITY_MULTIPLIER; @@ -1264,6 +1264,159 @@ int cxl_mem_sanitize(struct cxl_memdev *cxlmd, u16 cmd) return rc; } +static int cxl_dc_save_region_info(struct cxl_memdev_state *mds, u8 index, + struct cxl_dc_region_config *region_config) +{ + struct cxl_dc_region_info *dcr = &mds->dc_region[index]; + struct device *dev = mds->cxlds.dev; + + dcr->base = le64_to_cpu(region_config->region_base); + dcr->decode_len = le64_to_cpu(region_config->region_decode_length); + dcr->decode_len *= CXL_CAPACITY_MULTIPLIER; + dcr->len = le64_to_cpu(region_config->region_length); + dcr->blk_size = le64_to_cpu(region_config->region_block_size); + dcr->dsmad_handle = le32_to_cpu(region_config->region_dsmad_handle); + dcr->flags = region_config->flags; + snprintf(dcr->name, CXL_DC_REGION_STRLEN, "dc%d", index); + + /* Check regions are in increasing DPA order */ + if (index > 0) { + struct cxl_dc_region_info *prev_dcr = &mds->dc_region[index - 1]; + + if ((prev_dcr->base + prev_dcr->decode_len) > dcr->base) { + dev_err(dev, + "DPA ordering violation for DC region %d and %d\n", + index - 1, index); + return -EINVAL; + } + } + + if (!IS_ALIGNED(dcr->base, SZ_256M) || + !IS_ALIGNED(dcr->base, dcr->blk_size)) { + dev_err(dev, "DC region %d invalid base %#llx blk size %#llx\n", + index, dcr->base, dcr->blk_size); + return -EINVAL; + } + + if (dcr->decode_len == 0 || dcr->len == 0 || dcr->decode_len < dcr->len || + !IS_ALIGNED(dcr->len, dcr->blk_size)) { + dev_err(dev, "DC region %d invalid length; decode %#llx len %#llx blk size %#llx\n", + index, dcr->decode_len, dcr->len, dcr->blk_size); + return -EINVAL; + } + + if (dcr->blk_size == 0 || dcr->blk_size % CXL_DCD_BLOCK_LINE_SIZE || + !is_power_of_2(dcr->blk_size)) { + dev_err(dev, "DC region %d invalid block size; %#llx\n", + index, dcr->blk_size); + return -EINVAL; + } + + dev_dbg(dev, + "DC region %s base %#llx length %#llx block size %#llx\n", + dcr->name, dcr->base, dcr->decode_len, dcr->blk_size); + + return 0; +} + +/* Returns the number of regions in dc_resp or -ERRNO */ +static int cxl_get_dc_config(struct cxl_memdev_state *mds, u8 start_region, + struct cxl_mbox_get_dc_config_out *dc_resp, + size_t dc_resp_size) +{ + struct cxl_mbox_get_dc_config_in get_dc = (struct cxl_mbox_get_dc_config_in) { + .region_count = CXL_MAX_DC_REGION, + .start_region_index = start_region, + }; + struct cxl_mbox_cmd mbox_cmd = (struct cxl_mbox_cmd) { + .opcode = CXL_MBOX_OP_GET_DC_CONFIG, + .payload_in = &get_dc, + .size_in = sizeof(get_dc), + .size_out = dc_resp_size, + .payload_out = dc_resp, + .min_out = 1, + }; + struct device *dev = mds->cxlds.dev; + int rc; + + rc = cxl_internal_send_cmd(mds, &mbox_cmd); + if (rc < 0) + return rc; + + dev_dbg(dev, "Read %d/%d DC regions\n", + dc_resp->regions_returned, dc_resp->avail_region_count); + return dc_resp->regions_returned; +} + +/** + * cxl_dev_dynamic_capacity_identify() - Reads the dynamic capacity + * information from the device. + * @mds: The memory device state + * + * Read Dynamic Capacity information from the device and populate the state + * structures for later use. + * + * Return: 0 if identify was executed successfully, -ERRNO on error. + */ +int cxl_dev_dynamic_capacity_identify(struct cxl_memdev_state *mds) +{ + size_t dc_resp_size = mds->payload_size; + struct device *dev = mds->cxlds.dev; + u8 start_region, i; + + for (i = 0; i < CXL_MAX_DC_REGION; i++) + snprintf(mds->dc_region[i].name, CXL_DC_REGION_STRLEN, "<nil>"); + + if (!cxl_dcd_supported(mds)) { + dev_dbg(dev, "DCD not supported\n"); + return 0; + } + + struct cxl_mbox_get_dc_config_out *dc_resp __free(kfree) = + kvmalloc(dc_resp_size, GFP_KERNEL); + if (!dc_resp) + return -ENOMEM; + + start_region = 0; + do { + int rc, j; + + rc = cxl_get_dc_config(mds, start_region, dc_resp, dc_resp_size); + if (rc < 0) { + dev_dbg(dev, "Failed to get DC config: %d\n", rc); + return rc; + } + + mds->nr_dc_region += rc; + + if (mds->nr_dc_region < 1 || mds->nr_dc_region > CXL_MAX_DC_REGION) { + dev_err(dev, "Invalid num of dynamic capacity regions %d\n", + mds->nr_dc_region); + return -EINVAL; + } + + for (i = start_region, j = 0; i < mds->nr_dc_region; i++, j++) { + rc = cxl_dc_save_region_info(mds, i, &dc_resp->region[j]); + if (rc) { + dev_dbg(dev, "Failed to save region info: %d\n", rc); + return rc; + } + } + + start_region = mds->nr_dc_region; + + } while (mds->nr_dc_region < dc_resp->avail_region_count); + + mds->dynamic_bytes = + mds->dc_region[mds->nr_dc_region - 1].base + + mds->dc_region[mds->nr_dc_region - 1].decode_len - + mds->dc_region[0].base; + dev_dbg(dev, "Total dynamic range: %#llx\n", mds->dynamic_bytes); + + return 0; +} +EXPORT_SYMBOL_NS_GPL(cxl_dev_dynamic_capacity_identify, CXL); + static int add_dpa_res(struct device *dev, struct resource *parent, struct resource *res, resource_size_t start, resource_size_t size, const char *type) @@ -1294,8 +1447,15 @@ int cxl_mem_create_range_info(struct cxl_memdev_state *mds) { struct cxl_dev_state *cxlds = &mds->cxlds; struct device *dev = cxlds->dev; + size_t untenanted_mem; int rc; + mds->total_bytes = mds->static_bytes; + if (mds->nr_dc_region) { + untenanted_mem = mds->dc_region[0].base - mds->static_bytes; + mds->total_bytes += untenanted_mem + mds->dynamic_bytes; + } + if (!cxlds->media_ready) { cxlds->dpa_res = DEFINE_RES_MEM(0, 0); cxlds->ram_res = DEFINE_RES_MEM(0, 0); @@ -1305,6 +1465,15 @@ int cxl_mem_create_range_info(struct cxl_memdev_state *mds) cxlds->dpa_res = DEFINE_RES_MEM(0, mds->total_bytes); + for (int i = 0; i < mds->nr_dc_region; i++) { + struct cxl_dc_region_info *dcr = &mds->dc_region[i]; + + rc = add_dpa_res(dev, &cxlds->dpa_res, &cxlds->dc_res[i], + dcr->base, dcr->decode_len, dcr->name); + if (rc) + return rc; + } + if (mds->partition_align_bytes == 0) { rc = add_dpa_res(dev, &cxlds->dpa_res, &cxlds->ram_res, 0, mds->volatile_only_bytes, "ram"); diff --git a/drivers/cxl/cxlmem.h b/drivers/cxl/cxlmem.h index f2f8b567e0e7..b4eb8164d05d 100644 --- a/drivers/cxl/cxlmem.h +++ b/drivers/cxl/cxlmem.h @@ -402,6 +402,7 @@ enum cxl_devtype { CXL_DEVTYPE_CLASSMEM, }; +#define CXL_MAX_DC_REGION 8 /** * struct cxl_dpa_perf - DPA performance property entry * @dpa_range: range for DPA address @@ -431,6 +432,8 @@ struct cxl_dpa_perf { * @dpa_res: Overall DPA resource tree for the device * @pmem_res: Active Persistent memory capacity configuration * @ram_res: Active Volatile memory capacity configuration + * @dc_res: Active Dynamic Capacity memory configuration for each possible + * region * @serial: PCIe Device Serial Number * @type: Generic Memory Class device or Vendor Specific Memory device */ @@ -445,10 +448,22 @@ struct cxl_dev_state { struct resource dpa_res; struct resource pmem_res; struct resource ram_res; + struct resource dc_res[CXL_MAX_DC_REGION]; u64 serial; enum cxl_devtype type; }; +#define CXL_DC_REGION_STRLEN 8 +struct cxl_dc_region_info { + u64 base; + u64 decode_len; + u64 len; + u64 blk_size; + u32 dsmad_handle; + u8 flags; + u8 name[CXL_DC_REGION_STRLEN]; +}; + /** * struct cxl_memdev_state - Generic Type-3 Memory Device Class driver data * @@ -466,7 +481,9 @@ struct cxl_dev_state { * @dcd_cmds: List of DCD commands implemented by memory device * @enabled_cmds: Hardware commands found enabled in CEL. * @exclusive_cmds: Commands that are kernel-internal only - * @total_bytes: sum of all possible capacities + * @total_bytes: length of all possible capacities + * @static_bytes: length of possible static RAM and PMEM partitions + * @dynamic_bytes: length of possible DC partitions (DC Regions) * @volatile_only_bytes: hard volatile capacity * @persistent_only_bytes: hard persistent capacity * @partition_align_bytes: alignment size for partition-able capacity @@ -476,6 +493,8 @@ struct cxl_dev_state { * @next_persistent_bytes: persistent capacity change pending device reset * @ram_perf: performance data entry matched to RAM partition * @pmem_perf: performance data entry matched to PMEM partition + * @nr_dc_region: number of DC regions implemented in the memory device + * @dc_region: array containing info about the DC regions * @event: event log driver state * @poison: poison driver state info * @security: security driver state info @@ -496,6 +515,8 @@ struct cxl_memdev_state { DECLARE_BITMAP(enabled_cmds, CXL_MEM_COMMAND_ID_MAX); DECLARE_BITMAP(exclusive_cmds, CXL_MEM_COMMAND_ID_MAX); u64 total_bytes; + u64 static_bytes; + u64 dynamic_bytes; u64 volatile_only_bytes; u64 persistent_only_bytes; u64 partition_align_bytes; @@ -507,6 +528,9 @@ struct cxl_memdev_state { struct cxl_dpa_perf ram_perf; struct cxl_dpa_perf pmem_perf; + u8 nr_dc_region; + struct cxl_dc_region_info dc_region[CXL_MAX_DC_REGION]; + struct cxl_event_state event; struct cxl_poison_state poison; struct cxl_security_state security; @@ -709,6 +733,32 @@ struct cxl_mbox_set_partition_info { #define CXL_SET_PARTITION_IMMEDIATE_FLAG BIT(0) +/* See CXL 3.1 Table 8-163 get dynamic capacity config Input Payload */ +struct cxl_mbox_get_dc_config_in { + u8 region_count; + u8 start_region_index; +} __packed; + +/* See CXL 3.1 Table 8-164 get dynamic capacity config Output Payload */ +struct cxl_mbox_get_dc_config_out { + u8 avail_region_count; + u8 regions_returned; + u8 rsvd[6]; + /* See CXL 3.1 Table 8-165 */ + struct cxl_dc_region_config { + __le64 region_base; + __le64 region_decode_length; + __le64 region_length; + __le64 region_block_size; + __le32 region_dsmad_handle; + u8 flags; + u8 rsvd[3]; + } __packed region[]; + /* Trailing fields unused */ +} __packed; +#define CXL_DYNAMIC_CAPACITY_SANITIZE_ON_RELEASE_FLAG BIT(0) +#define CXL_DCD_BLOCK_LINE_SIZE 0x40 + /* Set Timestamp CXL 3.0 Spec 8.2.9.4.2 */ struct cxl_mbox_set_timestamp_in { __le64 timestamp; @@ -832,6 +882,7 @@ enum { int cxl_internal_send_cmd(struct cxl_memdev_state *mds, struct cxl_mbox_cmd *cmd); int cxl_dev_state_identify(struct cxl_memdev_state *mds); +int cxl_dev_dynamic_capacity_identify(struct cxl_memdev_state *mds); int cxl_await_media_ready(struct cxl_dev_state *cxlds); int cxl_enumerate_cmds(struct cxl_memdev_state *mds); int cxl_mem_create_range_info(struct cxl_memdev_state *mds); @@ -845,6 +896,17 @@ void cxl_event_trace_record(const struct cxl_memdev *cxlmd, enum cxl_event_log_type type, enum cxl_event_type event_type, const uuid_t *uuid, union cxl_event *evt); + +static inline bool cxl_dcd_supported(struct cxl_memdev_state *mds) +{ + return test_bit(CXL_DCD_ENABLED_GET_CONFIG, mds->dcd_cmds); +} + +static inline void cxl_disable_dcd(struct cxl_memdev_state *mds) +{ + clear_bit(CXL_DCD_ENABLED_GET_CONFIG, mds->dcd_cmds); +} + int cxl_set_timestamp(struct cxl_memdev_state *mds); int cxl_poison_state_init(struct cxl_memdev_state *mds); int cxl_mem_get_poison(struct cxl_memdev *cxlmd, u64 offset, u64 len, diff --git a/drivers/cxl/pci.c b/drivers/cxl/pci.c index 3a60cd66263e..f7f03599bc83 100644 --- a/drivers/cxl/pci.c +++ b/drivers/cxl/pci.c @@ -874,6 +874,10 @@ static int cxl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id) if (rc) return rc; + rc = cxl_dev_dynamic_capacity_identify(mds); + if (rc) + cxl_disable_dcd(mds); + rc = cxl_mem_create_range_info(mds); if (rc) return rc;