[v7,0/3] Add support rockchip RGB output interface

Message

黄家钗 Aug. 29, 2018, 3:12 a.m. UTC

This patches add support rockchip RGB output, Some Rockchip CRTCs, like
rv1108 and px30 can directly output parallel and serial RGB data to panel
or to conversion chip.
So add a feature-bit for vops to mark the ability for these direct outputs
and add an internal encoder in that case, that can attach to bridge chips
or panels.


Heiko Stuebner (1):
  drm/tockchip: add function to check if endpoint is a subdriver

Sandy Huang (2):
  drm/rockchip: Add support for Rockchip Soc RGB output interface
  drm/rockchip: Add directly output rgb feature for px30

 drivers/gpu/drm/rockchip/Kconfig            |  11 ++
 drivers/gpu/drm/rockchip/Makefile           |   1 +
 drivers/gpu/drm/rockchip/rockchip_drm_drv.c |  27 +++++
 drivers/gpu/drm/rockchip/rockchip_drm_drv.h |   1 +
 drivers/gpu/drm/rockchip/rockchip_drm_vop.c |  16 +++
 drivers/gpu/drm/rockchip/rockchip_drm_vop.h |   1 +
 drivers/gpu/drm/rockchip/rockchip_rgb.c     | 173 ++++++++++++++++++++++++++++
 drivers/gpu/drm/rockchip/rockchip_rgb.h     |  20 ++++
 drivers/gpu/drm/rockchip/rockchip_vop_reg.c |   2 +
 9 files changed, 252 insertions(+)
 create mode 100644 drivers/gpu/drm/rockchip/rockchip_rgb.c
 create mode 100644 drivers/gpu/drm/rockchip/rockchip_rgb.h

Comments

Heiko Stübner Aug. 30, 2018, 8:28 a.m. UTC | #1

Am Mittwoch, 29. August 2018, 05:12:41 CEST schrieb Sandy Huang:
> This patches add support rockchip RGB output, Some Rockchip CRTCs, like
> rv1108 and px30 can directly output parallel and serial RGB data to panel
> or to conversion chip.
> So add a feature-bit for vops to mark the ability for these direct outputs
> and add an internal encoder in that case, that can attach to bridge chips
> or panels.

I'm obviously ok with this series, but let's give it till monday or so
before applying to give people a bit longer to comment if necessary.


Heiko