[v2,0/2] drm/bridge: Support for Toshiba tc358768 RGB to DSI bridge

Message

Peter Ujfalusi Jan. 24, 2020, 10:55 a.m. UTC

Hi,

Changes since v1:
DT bindings document:
- Removed MaxItems for the regulators
- additionalProperties: false added to port@1

Driver:
- Year is now 2020
- Includes shorted
- The three letter members of the private struct documented 0 they are named as
  in the datasheet
- Error handling for the IO functions is following what sil-sii8620.c does
- regmap regcache is disabled along with refcache_sync() and volatile callback
  for regmap
- The hw enable and disable functions got separated
- Taken the suggested simplifactions from Andrzej for tc358768_calc_pll() and
  tc358768_dsi_host_transfer()
- The driver no longer stores the drm_display_mode, it relies on
  priv->bridge.encoder->crtc->state->adjusted_mode where it needs it
- tc358768_calc_pll() can be used for verification only to not modify the state
- refcounting added for hw enable state as a dsi transfer was shutting down the
  bridge when it was already enabled.

Tested on top of drm-next + LED backlight patches + DT patches on dra7-evm with
osd101t2045 (panel-simple) and osd101t2587 panel drivers.

Cover letter from v1:
TC358768 is a parallel RGB to MIPI DSI bridge.

The initial driver supports MIPI_DSI_MODE_VIDEO, MIPI_DSI_FMT_RGB888 and
only write is implemented for mipi_dsi_host_ops.transfer due to lack of hardware
where other modes can be tested.

Regards,
Peter
---
Peter Ujfalusi (2):
  dt-bindings: display: bridge: Add documentation for Toshiba tc358768
  drm/bridge: Add tc358768 driver

 .../display/bridge/toshiba,tc358768.yaml      | 158 +++
 drivers/gpu/drm/bridge/Kconfig                |  10 +
 drivers/gpu/drm/bridge/Makefile               |   1 +
 drivers/gpu/drm/bridge/tc358768.c             | 992 ++++++++++++++++++
 4 files changed, 1161 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/bridge/toshiba,tc358768.yaml
 create mode 100644 drivers/gpu/drm/bridge/tc358768.c