| Message ID | 20200514060732.3378396-1-gwan-gyeong.mun@intel.com (mailing list archive) |
|---|---|
| Headers | show |
| Series | In order to readout DP SDPs, refactors the handling of DP SDPs | expand |
On Thu, 14 May 2020, Gwan-gyeong Mun <gwan-gyeong.mun@intel.com> wrote: > In order to readout DP SDPs (Secondary Data Packet: DP HDR Metadata > Infoframe SDP, DP VSC SDP), it refactors handling DP SDPs codes. > It adds new compute routines for DP HDR Metadata Infoframe SDP > and DP VSC SDP. > And new writing routines of DP SDPs (Secondary Data Packet) that uses > computed configs. > New reading routines of DP SDPs are added for readout. > It adds a logging function for DP VSC SDP. > When receiving video it is very useful to be able to log DP VSC SDP. > This greatly simplifies debugging. > In order to use a common VSC SDP Colorimetry calculating code on PSR, > it uses a new psr vsc sdp compute routine. Pushed the series to drm-intel-next-queued with Daniel's irc ack for merging the two non-i915 patches that route too. Thanks for the patches and review! BR, Jani.
On Thu, May 14, 2020 at 02:19:23PM +0300, Jani Nikula wrote: > On Thu, 14 May 2020, Gwan-gyeong Mun <gwan-gyeong.mun@intel.com> wrote: > > In order to readout DP SDPs (Secondary Data Packet: DP HDR Metadata > > Infoframe SDP, DP VSC SDP), it refactors handling DP SDPs codes. > > It adds new compute routines for DP HDR Metadata Infoframe SDP > > and DP VSC SDP. > > And new writing routines of DP SDPs (Secondary Data Packet) that uses > > computed configs. > > New reading routines of DP SDPs are added for readout. > > It adds a logging function for DP VSC SDP. > > When receiving video it is very useful to be able to log DP VSC SDP. > > This greatly simplifies debugging. > > In order to use a common VSC SDP Colorimetry calculating code on PSR, > > it uses a new psr vsc sdp compute routine. > > Pushed the series to drm-intel-next-queued with Daniel's irc ack for > merging the two non-i915 patches that route too. fi-hsw-4770 now oopses at boot: <1>[ 3.736903] BUG: kernel NULL pointer dereference, address: 0000000000000000 <1>[ 3.736916] #PF: supervisor read access in kernel mode <1>[ 3.736916] #PF: error_code(0x0000) - not-present page <6>[ 3.736917] PGD 0 P4D 0 <4>[ 3.736919] Oops: 0000 [#1] PREEMPT SMP PTI <4>[ 3.736921] CPU: 0 PID: 363 Comm: systemd-udevd Not tainted 5.7.0-rc5-CI-CI_DRM_8485+ #1 <4>[ 3.736922] Hardware name: LENOVO 10AGS00601/SHARKBAY, BIOS FBKT34AUS 04/24/2013 <4>[ 3.736986] RIP: 0010:intel_psr_enabled+0x8/0x70 [i915] <4>[ 3.736988] Code: 18 48 c7 c6 40 09 79 a0 e8 e3 e2 04 e1 0f b6 44 24 03 e9 f4 fd ff ff 90 66 2e 0f 1f 84 00 00 00 00 00 41 54 55 53 48 83 ec 08 <48> 8b 9f d8 fe ff ff f6 83 5e 0d 00 00 20 74 09 80 bb 6c b6 00 00 <4>[ 3.737036] RSP: 0018:ffffc9000047f8a0 EFLAGS: 00010286 <4>[ 3.737042] RAX: 0000000000000002 RBX: ffff8883ffd04000 RCX: 0000000000000001 <4>[ 3.737048] RDX: 0000000000000007 RSI: ffff8883ffd04000 RDI: 0000000000000128 <4>[ 3.737055] RBP: ffff888406afe200 R08: 000000000000000f R09: 0000000000000001 <4>[ 3.737061] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 <4>[ 3.737068] R13: ffff8883f75d0000 R14: ffff888406afe200 R15: ffff8883f75d0870 <4>[ 3.737075] FS: 00007f71618f9680(0000) GS:ffff88840ec00000(0000) knlGS:0000000000000000 <4>[ 3.737082] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 <4>[ 3.737088] CR2: 0000000000000000 CR3: 0000000402510002 CR4: 00000000001606f0 <4>[ 3.737094] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 <4>[ 3.737101] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 <4>[ 3.737107] Call Trace: <4>[ 3.737175] intel_read_dp_sdp+0x1a4/0x380 [i915] <4>[ 3.737246] hsw_crt_get_config+0x12/0x40 [i915] <4>[ 3.737317] intel_modeset_setup_hw_state+0x3b3/0x16a0 [i915] ...
On Fri, 15 May 2020, Ville Syrjälä <ville.syrjala@linux.intel.com> wrote: > On Thu, May 14, 2020 at 02:19:23PM +0300, Jani Nikula wrote: >> On Thu, 14 May 2020, Gwan-gyeong Mun <gwan-gyeong.mun@intel.com> wrote: >> > In order to readout DP SDPs (Secondary Data Packet: DP HDR Metadata >> > Infoframe SDP, DP VSC SDP), it refactors handling DP SDPs codes. >> > It adds new compute routines for DP HDR Metadata Infoframe SDP >> > and DP VSC SDP. >> > And new writing routines of DP SDPs (Secondary Data Packet) that uses >> > computed configs. >> > New reading routines of DP SDPs are added for readout. >> > It adds a logging function for DP VSC SDP. >> > When receiving video it is very useful to be able to log DP VSC SDP. >> > This greatly simplifies debugging. >> > In order to use a common VSC SDP Colorimetry calculating code on PSR, >> > it uses a new psr vsc sdp compute routine. >> >> Pushed the series to drm-intel-next-queued with Daniel's irc ack for >> merging the two non-i915 patches that route too. > > fi-hsw-4770 now oopses at boot: /o\ What did I miss? What part about the CI report did I overlook? BR, Jani. > > <1>[ 3.736903] BUG: kernel NULL pointer dereference, address: 0000000000000000 > <1>[ 3.736916] #PF: supervisor read access in kernel mode > <1>[ 3.736916] #PF: error_code(0x0000) - not-present page > <6>[ 3.736917] PGD 0 P4D 0 > <4>[ 3.736919] Oops: 0000 [#1] PREEMPT SMP PTI > <4>[ 3.736921] CPU: 0 PID: 363 Comm: systemd-udevd Not tainted 5.7.0-rc5-CI-CI_DRM_8485+ #1 > <4>[ 3.736922] Hardware name: LENOVO 10AGS00601/SHARKBAY, BIOS FBKT34AUS 04/24/2013 > <4>[ 3.736986] RIP: 0010:intel_psr_enabled+0x8/0x70 [i915] > <4>[ 3.736988] Code: 18 48 c7 c6 40 09 79 a0 e8 e3 e2 04 e1 0f b6 44 24 03 e9 f4 fd ff ff 90 66 2e 0f 1f 84 00 00 00 00 00 41 54 55 53 48 83 ec 08 <48> 8b 9f d8 fe ff ff f6 83 5e 0d 00 00 20 74 09 80 bb 6c b6 00 00 > <4>[ 3.737036] RSP: 0018:ffffc9000047f8a0 EFLAGS: 00010286 > <4>[ 3.737042] RAX: 0000000000000002 RBX: ffff8883ffd04000 RCX: 0000000000000001 > <4>[ 3.737048] RDX: 0000000000000007 RSI: ffff8883ffd04000 RDI: 0000000000000128 > <4>[ 3.737055] RBP: ffff888406afe200 R08: 000000000000000f R09: 0000000000000001 > <4>[ 3.737061] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 > <4>[ 3.737068] R13: ffff8883f75d0000 R14: ffff888406afe200 R15: ffff8883f75d0870 > <4>[ 3.737075] FS: 00007f71618f9680(0000) GS:ffff88840ec00000(0000) knlGS:0000000000000000 > <4>[ 3.737082] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 > <4>[ 3.737088] CR2: 0000000000000000 CR3: 0000000402510002 CR4: 00000000001606f0 > <4>[ 3.737094] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 > <4>[ 3.737101] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 > <4>[ 3.737107] Call Trace: > <4>[ 3.737175] intel_read_dp_sdp+0x1a4/0x380 [i915] > <4>[ 3.737246] hsw_crt_get_config+0x12/0x40 [i915] > <4>[ 3.737317] intel_modeset_setup_hw_state+0x3b3/0x16a0 [i915] > ...
On Fri, May 15, 2020 at 04:13:18PM +0300, Jani Nikula wrote: > On Fri, 15 May 2020, Ville Syrjälä <ville.syrjala@linux.intel.com> wrote: > > On Thu, May 14, 2020 at 02:19:23PM +0300, Jani Nikula wrote: > >> On Thu, 14 May 2020, Gwan-gyeong Mun <gwan-gyeong.mun@intel.com> wrote: > >> > In order to readout DP SDPs (Secondary Data Packet: DP HDR Metadata > >> > Infoframe SDP, DP VSC SDP), it refactors handling DP SDPs codes. > >> > It adds new compute routines for DP HDR Metadata Infoframe SDP > >> > and DP VSC SDP. > >> > And new writing routines of DP SDPs (Secondary Data Packet) that uses > >> > computed configs. > >> > New reading routines of DP SDPs are added for readout. > >> > It adds a logging function for DP VSC SDP. > >> > When receiving video it is very useful to be able to log DP VSC SDP. > >> > This greatly simplifies debugging. > >> > In order to use a common VSC SDP Colorimetry calculating code on PSR, > >> > it uses a new psr vsc sdp compute routine. > >> > >> Pushed the series to drm-intel-next-queued with Daniel's irc ack for > >> merging the two non-i915 patches that route too. > > > > fi-hsw-4770 now oopses at boot: > > /o\ > > What did I miss? What part about the CI report did I overlook? Participating hosts (48 -> 45) ------------------------------ Additional (1): fi-kbl-7560u Missing (4): fi-byt-clapper fi-byt-squawks fi-bsw-cyan fi-hsw-4200u You kill machines at boot, CI won't tell you. This is (or at least was) because the network is shitty enough that we have more spurious failures because the ethernet went into the ether than because of people having killed the machine with their patches for real. Also it's hard to grab logs if the thing doesn't work at all, so cant give you any more data than the above. Yes this sucks :-/ Cheers, Daniel > > BR, > Jani. > > > > > > <1>[ 3.736903] BUG: kernel NULL pointer dereference, address: 0000000000000000 > > <1>[ 3.736916] #PF: supervisor read access in kernel mode > > <1>[ 3.736916] #PF: error_code(0x0000) - not-present page > > <6>[ 3.736917] PGD 0 P4D 0 > > <4>[ 3.736919] Oops: 0000 [#1] PREEMPT SMP PTI > > <4>[ 3.736921] CPU: 0 PID: 363 Comm: systemd-udevd Not tainted 5.7.0-rc5-CI-CI_DRM_8485+ #1 > > <4>[ 3.736922] Hardware name: LENOVO 10AGS00601/SHARKBAY, BIOS FBKT34AUS 04/24/2013 > > <4>[ 3.736986] RIP: 0010:intel_psr_enabled+0x8/0x70 [i915] > > <4>[ 3.736988] Code: 18 48 c7 c6 40 09 79 a0 e8 e3 e2 04 e1 0f b6 44 24 03 e9 f4 fd ff ff 90 66 2e 0f 1f 84 00 00 00 00 00 41 54 55 53 48 83 ec 08 <48> 8b 9f d8 fe ff ff f6 83 5e 0d 00 00 20 74 09 80 bb 6c b6 00 00 > > <4>[ 3.737036] RSP: 0018:ffffc9000047f8a0 EFLAGS: 00010286 > > <4>[ 3.737042] RAX: 0000000000000002 RBX: ffff8883ffd04000 RCX: 0000000000000001 > > <4>[ 3.737048] RDX: 0000000000000007 RSI: ffff8883ffd04000 RDI: 0000000000000128 > > <4>[ 3.737055] RBP: ffff888406afe200 R08: 000000000000000f R09: 0000000000000001 > > <4>[ 3.737061] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 > > <4>[ 3.737068] R13: ffff8883f75d0000 R14: ffff888406afe200 R15: ffff8883f75d0870 > > <4>[ 3.737075] FS: 00007f71618f9680(0000) GS:ffff88840ec00000(0000) knlGS:0000000000000000 > > <4>[ 3.737082] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 > > <4>[ 3.737088] CR2: 0000000000000000 CR3: 0000000402510002 CR4: 00000000001606f0 > > <4>[ 3.737094] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 > > <4>[ 3.737101] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 > > <4>[ 3.737107] Call Trace: > > <4>[ 3.737175] intel_read_dp_sdp+0x1a4/0x380 [i915] > > <4>[ 3.737246] hsw_crt_get_config+0x12/0x40 [i915] > > <4>[ 3.737317] intel_modeset_setup_hw_state+0x3b3/0x16a0 [i915] > > ... > > -- > Jani Nikula, Intel Open Source Graphics Center
Hi, > -----Original Message----- > From: Intel-gfx <intel-gfx-bounces@lists.freedesktop.org> On Behalf Of Jani Nikula > Sent: perjantai 15. toukokuuta 2020 16.13 > To: Ville Syrjälä <ville.syrjala@linux.intel.com> > Cc: linux-fbdev@vger.kernel.org; daniel.vetter@ffwll.ch; intel- > gfx@lists.freedesktop.org; dri-devel@lists.freedesktop.org; > laurent.pinchart@ideasonboard.com > Subject: Re: [Intel-gfx] [PATCH v12 00/14] In order to readout DP SDPs, refactors the > handling of DP SDPs > > On Fri, 15 May 2020, Ville Syrjälä <ville.syrjala@linux.intel.com> wrote: > > On Thu, May 14, 2020 at 02:19:23PM +0300, Jani Nikula wrote: > >> On Thu, 14 May 2020, Gwan-gyeong Mun <gwan-gyeong.mun@intel.com> > wrote: > >> > In order to readout DP SDPs (Secondary Data Packet: DP HDR Metadata > >> > Infoframe SDP, DP VSC SDP), it refactors handling DP SDPs codes. > >> > It adds new compute routines for DP HDR Metadata Infoframe SDP and > >> > DP VSC SDP. > >> > And new writing routines of DP SDPs (Secondary Data Packet) that > >> > uses computed configs. > >> > New reading routines of DP SDPs are added for readout. > >> > It adds a logging function for DP VSC SDP. > >> > When receiving video it is very useful to be able to log DP VSC SDP. > >> > This greatly simplifies debugging. > >> > In order to use a common VSC SDP Colorimetry calculating code on > >> > PSR, it uses a new psr vsc sdp compute routine. > >> > >> Pushed the series to drm-intel-next-queued with Daniel's irc ack for > >> merging the two non-i915 patches that route too. > > > > fi-hsw-4770 now oopses at boot: > > /o\ > > What did I miss? What part about the CI report did I overlook? Damn, indeed: https://patchwork.freedesktop.org/series/72853/ Ci results is success but it has: Known issues ------------ Here are the changes found in Patchwork_17654 that come from known issues: ### CI changes ### #### Issues hit #### * boot: - fi-hsw-4770: [PASS][1] -> [FAIL][2] ([CI#80]) [1]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8481/fi-hsw-4770/boot.html [2]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_17654/fi-hsw-4770/boot.html > > BR, > Jani. > > > > > > <1>[ 3.736903] BUG: kernel NULL pointer dereference, address: > 0000000000000000 > > <1>[ 3.736916] #PF: supervisor read access in kernel mode > > <1>[ 3.736916] #PF: error_code(0x0000) - not-present page > > <6>[ 3.736917] PGD 0 P4D 0 > > <4>[ 3.736919] Oops: 0000 [#1] PREEMPT SMP PTI > > <4>[ 3.736921] CPU: 0 PID: 363 Comm: systemd-udevd Not tainted 5.7.0-rc5-CI- > CI_DRM_8485+ #1 > > <4>[ 3.736922] Hardware name: LENOVO 10AGS00601/SHARKBAY, BIOS > FBKT34AUS 04/24/2013 > > <4>[ 3.736986] RIP: 0010:intel_psr_enabled+0x8/0x70 [i915] > > <4>[ 3.736988] Code: 18 48 c7 c6 40 09 79 a0 e8 e3 e2 04 e1 0f b6 44 24 03 e9 f4 > fd ff ff 90 66 2e 0f 1f 84 00 00 00 00 00 41 54 55 53 48 83 ec 08 <48> 8b 9f d8 fe ff ff > f6 83 5e 0d 00 00 20 74 09 80 bb 6c b6 00 00 > > <4>[ 3.737036] RSP: 0018:ffffc9000047f8a0 EFLAGS: 00010286 > > <4>[ 3.737042] RAX: 0000000000000002 RBX: ffff8883ffd04000 RCX: > 0000000000000001 > > <4>[ 3.737048] RDX: 0000000000000007 RSI: ffff8883ffd04000 RDI: > 0000000000000128 > > <4>[ 3.737055] RBP: ffff888406afe200 R08: 000000000000000f R09: > 0000000000000001 > > <4>[ 3.737061] R10: 0000000000000000 R11: 0000000000000000 R12: > 0000000000000000 > > <4>[ 3.737068] R13: ffff8883f75d0000 R14: ffff888406afe200 R15: > ffff8883f75d0870 > > <4>[ 3.737075] FS: 00007f71618f9680(0000) GS:ffff88840ec00000(0000) > knlGS:0000000000000000 > > <4>[ 3.737082] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 > > <4>[ 3.737088] CR2: 0000000000000000 CR3: 0000000402510002 CR4: > 00000000001606f0 > > <4>[ 3.737094] DR0: 0000000000000000 DR1: 0000000000000000 DR2: > 0000000000000000 > > <4>[ 3.737101] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: > 0000000000000400 > > <4>[ 3.737107] Call Trace: > > <4>[ 3.737175] intel_read_dp_sdp+0x1a4/0x380 [i915] > > <4>[ 3.737246] hsw_crt_get_config+0x12/0x40 [i915] > > <4>[ 3.737317] intel_modeset_setup_hw_state+0x3b3/0x16a0 [i915] > > ... > > -- > Jani Nikula, Intel Open Source Graphics Center > _______________________________________________ > Intel-gfx mailing list > Intel-gfx@lists.freedesktop.org > https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Hi Ville, Thank you for notifying me that. I definitely missed the crash. Sorry for that. Danial and Jani, I' under debugging the crash case. If you are availabe please do not merge current version. Br, G.G. > On Fri, 2020-05-15 at 16:14 +0200, Daniel Vetter wrote: > On Fri, May 15, 2020 at 04:13:18PM +0300, Jani Nikula wrote: > > On Fri, 15 May 2020, Ville Syrjälä <ville.syrjala@linux.intel.com> > > wrote: > > > On Thu, May 14, 2020 at 02:19:23PM +0300, Jani Nikula wrote: > > > > On Thu, 14 May 2020, Gwan-gyeong Mun <gwan-gyeong.mun@intel.com > > > > > wrote: > > > > > In order to readout DP SDPs (Secondary Data Packet: DP HDR > > > > > Metadata > > > > > Infoframe SDP, DP VSC SDP), it refactors handling DP SDPs > > > > > codes. > > > > > It adds new compute routines for DP HDR Metadata Infoframe > > > > > SDP > > > > > and DP VSC SDP. > > > > > And new writing routines of DP SDPs (Secondary Data Packet) > > > > > that uses > > > > > computed configs. > > > > > New reading routines of DP SDPs are added for readout. > > > > > It adds a logging function for DP VSC SDP. > > > > > When receiving video it is very useful to be able to log DP > > > > > VSC SDP. > > > > > This greatly simplifies debugging. > > > > > In order to use a common VSC SDP Colorimetry calculating code > > > > > on PSR, > > > > > it uses a new psr vsc sdp compute routine. > > > > > > > > Pushed the series to drm-intel-next-queued with Daniel's irc > > > > ack for > > > > merging the two non-i915 patches that route too. > > > > > > fi-hsw-4770 now oopses at boot: > > > > /o\ > > > > What did I miss? What part about the CI report did I overlook? > > Participating hosts (48 -> 45) > ------------------------------ > > Additional (1): fi-kbl-7560u > Missing (4): fi-byt-clapper fi-byt-squawks fi-bsw-cyan fi-hsw- > 4200u > > > You kill machines at boot, CI won't tell you. > > This is (or at least was) because the network is shitty enough that > we > have more spurious failures because the ethernet went into the ether > than > because of people having killed the machine with their patches for > real. > Also it's hard to grab logs if the thing doesn't work at all, so cant > give > you any more data than the above. > > Yes this sucks :-/ > > Cheers, Daniel > > > BR, > > Jani. > > > > > > > <1>[ 3.736903] BUG: kernel NULL pointer dereference, address: > > > 0000000000000000 > > > <1>[ 3.736916] #PF: supervisor read access in kernel mode > > > <1>[ 3.736916] #PF: error_code(0x0000) - not-present page > > > <6>[ 3.736917] PGD 0 P4D 0 > > > <4>[ 3.736919] Oops: 0000 [#1] PREEMPT SMP PTI > > > <4>[ 3.736921] CPU: 0 PID: 363 Comm: systemd-udevd Not tainted > > > 5.7.0-rc5-CI-CI_DRM_8485+ #1 > > > <4>[ 3.736922] Hardware name: LENOVO 10AGS00601/SHARKBAY, BIOS > > > FBKT34AUS 04/24/2013 > > > <4>[ 3.736986] RIP: 0010:intel_psr_enabled+0x8/0x70 [i915] > > > <4>[ 3.736988] Code: 18 48 c7 c6 40 09 79 a0 e8 e3 e2 04 e1 0f > > > b6 44 24 03 e9 f4 fd ff ff 90 66 2e 0f 1f 84 00 00 00 00 00 41 54 > > > 55 53 48 83 ec 08 <48> 8b 9f d8 fe ff ff f6 83 5e 0d 00 00 20 74 > > > 09 80 bb 6c b6 00 00 > > > <4>[ 3.737036] RSP: 0018:ffffc9000047f8a0 EFLAGS: 00010286 > > > <4>[ 3.737042] RAX: 0000000000000002 RBX: ffff8883ffd04000 > > > RCX: 0000000000000001 > > > <4>[ 3.737048] RDX: 0000000000000007 RSI: ffff8883ffd04000 > > > RDI: 0000000000000128 > > > <4>[ 3.737055] RBP: ffff888406afe200 R08: 000000000000000f > > > R09: 0000000000000001 > > > <4>[ 3.737061] R10: 0000000000000000 R11: 0000000000000000 > > > R12: 0000000000000000 > > > <4>[ 3.737068] R13: ffff8883f75d0000 R14: ffff888406afe200 > > > R15: ffff8883f75d0870 > > > <4>[ 3.737075] FS: 00007f71618f9680(0000) > > > GS:ffff88840ec00000(0000) knlGS:0000000000000000 > > > <4>[ 3.737082] CS: 0010 DS: 0000 ES: 0000 CR0: > > > 0000000080050033 > > > <4>[ 3.737088] CR2: 0000000000000000 CR3: 0000000402510002 > > > CR4: 00000000001606f0 > > > <4>[ 3.737094] DR0: 0000000000000000 DR1: 0000000000000000 > > > DR2: 0000000000000000 > > > <4>[ 3.737101] DR3: 0000000000000000 DR6: 00000000fffe0ff0 > > > DR7: 0000000000000400 > > > <4>[ 3.737107] Call Trace: > > > <4>[ 3.737175] intel_read_dp_sdp+0x1a4/0x380 [i915] > > > <4>[ 3.737246] hsw_crt_get_config+0x12/0x40 [i915] > > > <4>[ 3.737317] intel_modeset_setup_hw_state+0x3b3/0x16a0 > > > [i915] > > > ... > > > > -- > > Jani Nikula, Intel Open Source Graphics Center
On Fri, 15 May 2020, "Mun, Gwan-gyeong" <gwan-gyeong.mun@intel.com> wrote: > Hi Ville, > Thank you for notifying me that. I definitely missed the crash. > Sorry for that. > Danial and Jani, I' under debugging the crash case. > If you are availabe please do not merge current version. It has been merged, and that's the oops is the main reason it got noticed. If you can produce a fairly quick fix, great, but otherwise we'll need to revert enough commits to make this work again. BR, Jani. > > Br, > > G.G. > >> > On Fri, 2020-05-15 at 16:14 +0200, Daniel Vetter wrote: >> On Fri, May 15, 2020 at 04:13:18PM +0300, Jani Nikula wrote: >> > On Fri, 15 May 2020, Ville Syrjälä <ville.syrjala@linux.intel.com> >> > wrote: >> > > On Thu, May 14, 2020 at 02:19:23PM +0300, Jani Nikula wrote: >> > > > On Thu, 14 May 2020, Gwan-gyeong Mun <gwan-gyeong.mun@intel.com >> > > > > wrote: >> > > > > In order to readout DP SDPs (Secondary Data Packet: DP HDR >> > > > > Metadata >> > > > > Infoframe SDP, DP VSC SDP), it refactors handling DP SDPs >> > > > > codes. >> > > > > It adds new compute routines for DP HDR Metadata Infoframe >> > > > > SDP >> > > > > and DP VSC SDP. >> > > > > And new writing routines of DP SDPs (Secondary Data Packet) >> > > > > that uses >> > > > > computed configs. >> > > > > New reading routines of DP SDPs are added for readout. >> > > > > It adds a logging function for DP VSC SDP. >> > > > > When receiving video it is very useful to be able to log DP >> > > > > VSC SDP. >> > > > > This greatly simplifies debugging. >> > > > > In order to use a common VSC SDP Colorimetry calculating code >> > > > > on PSR, >> > > > > it uses a new psr vsc sdp compute routine. >> > > > >> > > > Pushed the series to drm-intel-next-queued with Daniel's irc >> > > > ack for >> > > > merging the two non-i915 patches that route too. >> > > >> > > fi-hsw-4770 now oopses at boot: >> > >> > /o\ >> > >> > What did I miss? What part about the CI report did I overlook? >> >> Participating hosts (48 -> 45) >> ------------------------------ >> >> Additional (1): fi-kbl-7560u >> Missing (4): fi-byt-clapper fi-byt-squawks fi-bsw-cyan fi-hsw- >> 4200u >> >> >> You kill machines at boot, CI won't tell you. >> >> This is (or at least was) because the network is shitty enough that >> we >> have more spurious failures because the ethernet went into the ether >> than >> because of people having killed the machine with their patches for >> real. >> Also it's hard to grab logs if the thing doesn't work at all, so cant >> give >> you any more data than the above. >> >> Yes this sucks :-/ >> >> Cheers, Daniel >> >> > BR, >> > Jani. >> > >> > >> > > <1>[ 3.736903] BUG: kernel NULL pointer dereference, address: >> > > 0000000000000000 >> > > <1>[ 3.736916] #PF: supervisor read access in kernel mode >> > > <1>[ 3.736916] #PF: error_code(0x0000) - not-present page >> > > <6>[ 3.736917] PGD 0 P4D 0 >> > > <4>[ 3.736919] Oops: 0000 [#1] PREEMPT SMP PTI >> > > <4>[ 3.736921] CPU: 0 PID: 363 Comm: systemd-udevd Not tainted >> > > 5.7.0-rc5-CI-CI_DRM_8485+ #1 >> > > <4>[ 3.736922] Hardware name: LENOVO 10AGS00601/SHARKBAY, BIOS >> > > FBKT34AUS 04/24/2013 >> > > <4>[ 3.736986] RIP: 0010:intel_psr_enabled+0x8/0x70 [i915] >> > > <4>[ 3.736988] Code: 18 48 c7 c6 40 09 79 a0 e8 e3 e2 04 e1 0f >> > > b6 44 24 03 e9 f4 fd ff ff 90 66 2e 0f 1f 84 00 00 00 00 00 41 54 >> > > 55 53 48 83 ec 08 <48> 8b 9f d8 fe ff ff f6 83 5e 0d 00 00 20 74 >> > > 09 80 bb 6c b6 00 00 >> > > <4>[ 3.737036] RSP: 0018:ffffc9000047f8a0 EFLAGS: 00010286 >> > > <4>[ 3.737042] RAX: 0000000000000002 RBX: ffff8883ffd04000 >> > > RCX: 0000000000000001 >> > > <4>[ 3.737048] RDX: 0000000000000007 RSI: ffff8883ffd04000 >> > > RDI: 0000000000000128 >> > > <4>[ 3.737055] RBP: ffff888406afe200 R08: 000000000000000f >> > > R09: 0000000000000001 >> > > <4>[ 3.737061] R10: 0000000000000000 R11: 0000000000000000 >> > > R12: 0000000000000000 >> > > <4>[ 3.737068] R13: ffff8883f75d0000 R14: ffff888406afe200 >> > > R15: ffff8883f75d0870 >> > > <4>[ 3.737075] FS: 00007f71618f9680(0000) >> > > GS:ffff88840ec00000(0000) knlGS:0000000000000000 >> > > <4>[ 3.737082] CS: 0010 DS: 0000 ES: 0000 CR0: >> > > 0000000080050033 >> > > <4>[ 3.737088] CR2: 0000000000000000 CR3: 0000000402510002 >> > > CR4: 00000000001606f0 >> > > <4>[ 3.737094] DR0: 0000000000000000 DR1: 0000000000000000 >> > > DR2: 0000000000000000 >> > > <4>[ 3.737101] DR3: 0000000000000000 DR6: 00000000fffe0ff0 >> > > DR7: 0000000000000400 >> > > <4>[ 3.737107] Call Trace: >> > > <4>[ 3.737175] intel_read_dp_sdp+0x1a4/0x380 [i915] >> > > <4>[ 3.737246] hsw_crt_get_config+0x12/0x40 [i915] >> > > <4>[ 3.737317] intel_modeset_setup_hw_state+0x3b3/0x16a0 >> > > [i915] >> > > ... >> > >> > -- >> > Jani Nikula, Intel Open Source Graphics Center
In order to readout DP SDPs (Secondary Data Packet: DP HDR Metadata Infoframe SDP, DP VSC SDP), it refactors handling DP SDPs codes. It adds new compute routines for DP HDR Metadata Infoframe SDP and DP VSC SDP. And new writing routines of DP SDPs (Secondary Data Packet) that uses computed configs. New reading routines of DP SDPs are added for readout. It adds a logging function for DP VSC SDP. When receiving video it is very useful to be able to log DP VSC SDP. This greatly simplifies debugging. In order to use a common VSC SDP Colorimetry calculating code on PSR, it uses a new psr vsc sdp compute routine. v2: Minor style fix v3: - Add a new drm data structure for DP VSC SDP - Replace a structure name to drm_dp_vsc_sdp from intel_dp_vsc_sdp - Move logging functions to drm core [Jani N] And use drm core's DP VSC SDP logging function - Explicitly disable unused DIPs (AVI, GCP, VS, SPD, DRM. They will be used for HDMI), when intel_dp_set_infoframes() function will be called. v4: - Use struct drm_device logging macros - Rebased v5: - Use intel_de_*() functions for register access - Add warning where a bpc is 6 and a pixel format is RGB. - Addressed review comments from Uma Add kernel docs for added data structures Rename enum dp_colorspace to dp_pixelformat Polish commit message and comments Combine the if checks of sdp.HB2 and sdp.HB3 Add 6bpc to packining and unpacking of VSC SDP v6: Fix enabled infoframe states of lspcon v7: Fix the wrong check of combination bpc 6 and RGB pixelformat v8: Rebased v9: Add clear comments to hdmi_drm_infoframe_unpack_only() and hdmi_drm_infoframe_unpack() (Laurent Pinchart) v10: - Fix packing of VSC SDP where Pixel Encoding/Colorimetry Format is not supported - When a PSR is enabled, it needs to add DP_SDP_VSC to infoframes.enable. - Change a checking of PSR state. - Skip checking of VSC SDP when a crtc config has psr. - Rebased v11: If PSR is disabled by flag, it don't enable psr on pipe compute v12: Fix an inconsistent indenting Gwan-gyeong Mun (14): video/hdmi: Add Unpack only function for DRM infoframe drm/i915/dp: Read out DP SDPs drm: Add logging function for DP VSC SDP drm/i915: Include HDMI DRM infoframe in the crtc state dump drm/i915: Include DP HDR Metadata Infoframe SDP in the crtc state dump drm/i915: Include DP VSC SDP in the crtc state dump drm/i915: Program DP SDPs with computed configs drm/i915: Add state readout for DP HDR Metadata Infoframe SDP drm/i915: Add state readout for DP VSC SDP drm/i915: Fix enabled infoframe states of lspcon drm/i915: Program DP SDPs on pipe updates drm/i915: Stop sending DP SDPs on ddi disable drm/i915/dp: Add compute routine for DP PSR VSC SDP drm/i915/psr: Use new DP VSC SDP compute routine on PSR drivers/gpu/drm/drm_dp_helper.c | 174 ++++++++ drivers/gpu/drm/i915/display/intel_ddi.c | 19 +- drivers/gpu/drm/i915/display/intel_display.c | 63 +++ drivers/gpu/drm/i915/display/intel_dp.c | 406 ++++++++++--------- drivers/gpu/drm/i915/display/intel_dp.h | 15 +- drivers/gpu/drm/i915/display/intel_lspcon.c | 2 +- drivers/gpu/drm/i915/display/intel_psr.c | 58 +-- drivers/gpu/drm/i915/display/intel_psr.h | 6 +- drivers/gpu/drm/i915/i915_drv.h | 1 + drivers/video/hdmi.c | 65 ++- include/drm/drm_dp_helper.h | 3 + include/linux/hdmi.h | 2 + 12 files changed, 551 insertions(+), 263 deletions(-)