mbox series

[v3,0/2] Add support for the orisetech ota5601

Message ID 20221219195233.375637-1-cbranchereau@gmail.com (mailing list archive)
Headers show
Series Add support for the orisetech ota5601 | expand

Message

Christophe Branchereau Dec. 19, 2022, 7:52 p.m. UTC 
Changes since v2:
 - Documented the registers to the best of my knowledge
 - Used macros for on/off panel registers
 - Added SPI id_table (non-requested change, fixes a warning in dmesg)

---
Changes since v1:
 - fixed the dt-bindings maintainer email adress
 - dropped backlight, port, power-supply and reset-gpios as they're
   provided by panel-common.yaml as pointed by Krzysztof Kozlowski
 - changed reg: true to reg : maxItems: 1

Christophe Branchereau (2):
  drm/panel: add the orisetech ota5601a
  dt-bindings: display/panel: Add the Focaltech gpt3

 .../display/panel/focaltech,gpt3.yaml         |  56 +++
 drivers/gpu/drm/panel/Kconfig                 |   9 +
 drivers/gpu/drm/panel/Makefile                |   1 +
 .../gpu/drm/panel/panel-orisetech-ota5601a.c  | 364 ++++++++++++++++++
 4 files changed, 430 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/panel/focaltech,gpt3.yaml
 create mode 100644 drivers/gpu/drm/panel/panel-orisetech-ota5601a.c

Comments

Linus Walleij Dec. 29, 2022, 9:08 p.m. UTC | #1 
On Mon, Dec 19, 2022 at 8:52 PM Christophe Branchereau
<cbranchereau@gmail.com> wrote:

> Changes since v2:

This v3 patch set applied and pushed to drm-misc-next.

There were some minor checkpatch warnings that I just fixed
up while applying. Check the result in linux-next once it percolates.

Yours,
Linus Walleij