From patchwork Tue Apr 4 10:47:51 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: AngeloGioacchino Del Regno X-Patchwork-Id: 13199548 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from gabe.freedesktop.org (gabe.freedesktop.org [131.252.210.177]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.lore.kernel.org (Postfix) with ESMTPS id 24390C77B62 for ; Tue, 4 Apr 2023 10:48:20 +0000 (UTC) Received: from gabe.freedesktop.org (localhost [127.0.0.1]) by gabe.freedesktop.org (Postfix) with ESMTP id 523E110E65D; Tue, 4 Apr 2023 10:48:11 +0000 (UTC) Received: from madras.collabora.co.uk (madras.collabora.co.uk [IPv6:2a00:1098:0:82:1000:25:2eeb:e5ab]) by gabe.freedesktop.org (Postfix) with ESMTPS id 18F9110E65A for ; Tue, 4 Apr 2023 10:48:08 +0000 (UTC) Received: from IcarusMOD.eternityproject.eu (2-237-20-237.ip236.fastwebnet.it [2.237.20.237]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) key-exchange X25519 server-signature RSA-PSS (4096 bits) server-digest SHA256) (No client certificate requested) (Authenticated sender: kholk11) by madras.collabora.co.uk (Postfix) with ESMTPSA id 65B3B660000E; Tue, 4 Apr 2023 11:48:05 +0100 (BST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=collabora.com; s=mail; t=1680605286; bh=AAPNaHX0V1PialVkpX+4zJQpYY6tpjp8IWS8ZSYvSmQ=; h=From:To:Cc:Subject:Date:From; b=CXHh+puIkl5QU4tQoD0D1dPauiD9KWhgyP1q9dOW/XApTnvtC/AYSM7nmdrRBGvZi BSJgZEg4YbcVcvloFl2tg418BQq6B79yqeV6msXTk9Psz5SCrzvswQ2RVplfeTHc29 g3Xjznd2yVN6Nj8TfftDGeEwR3z0B7A96+rKxCihiFW5r1rDKYO+ZNZJktvcqfOrJy M7iMgCrRIYghjXYq/X4rPjA47xEUihUQZHzb4tERhl9AqOFDqraWqcv6h/T6R+e0N6 vzi5G4kySbHyWYn6Ts7IK4d2wQosAprUDTVeI/27hgl9tEYDcHSQMwc0x67DRO1joY IdWzYbjR9K6TQ== From: AngeloGioacchino Del Regno To: chunkuang.hu@kernel.org Subject: [PATCH v3 0/9] MediaTek DisplayPort: support eDP and aux-bus Date: Tue, 4 Apr 2023 12:47:51 +0200 Message-Id: <20230404104800.301150-1-angelogioacchino.delregno@collabora.com> X-Mailer: git-send-email 2.40.0 MIME-Version: 1.0 X-BeenThere: dri-devel@lists.freedesktop.org X-Mailman-Version: 2.1.29 Precedence: list List-Id: Direct Rendering Infrastructure - Development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Cc: linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org, linux-mediatek@lists.infradead.org, wenst@chromium.org, matthias.bgg@gmail.com, kernel@collabora.com, linux-arm-kernel@lists.infradead.org, angelogioacchino.delregno@collabora.com Errors-To: dri-devel-bounces@lists.freedesktop.org Sender: "dri-devel" Changes in v3: - Added DPTX AUX block initialization before trying to communicate to stop relying on the bootloader keeping it initialized before booting Linux. - Fixed commit description for patch [09/09] and removed commented out code (that slipped from dev phase.. sorry!). This series adds "real" support for eDP in the mtk-dp DisplayPort driver. Explaining the "real": Before this change, the DisplayPort driver did support eDP to some extent, but it was treating it entirely like a regular DP interface which is partially fine, after all, embedded DisplayPort *is* actually DisplayPort, but there might be some differences to account for... and this is for both small performance improvements and, more importantly, for correct functionality in some systems. Functionality first: One of the common differences found in various boards implementing eDP and machines using an eDP panel is that many times the HPD line is not connected. This *must* be accounted for: at startup, this specific IP will raise a HPD interrupt (which should maybe be ignored... as it does not appear to be a "real" event...) that will make the eDP panel to be detected and to actually work but, after a suspend-resume cycle, there will be no HPD interrupt (as there's no HPD line in my case!) producing a functionality issue - specifically, the DP Link Training fails because the panel doesn't get powered up, then it stays black and won't work until rebooting the machine (or removing and reinserting the module I think, but I haven't tried that). Now for.. both: eDP panels are *e*DP because they are *not* removable (in the sense that you can't unplug the cable without disassembling the machine, in which case, the machine shall be powered down..!): this (correct) assumption makes us able to solve some issues and to also gain a little performance during PM operations. What was done here is: - Caching the EDID if the panel is eDP: we're always going to read the same data everytime, so we can just cache that (as it's small enough) shortening PM resume times for the eDP driver instance; - Always return connector_status_connected if it's eDP: non-removable means connector_status_disconnected can't happen during runtime... this also saves us some time and even power, as we won't have to perform yet another power cycle of the HW; - Added aux-bus support! This makes us able to rely on panel autodetection from the EDID, avoiding to add more and more panel timings to panel-edp and, even better, allowing to use one panel node in devicetrees for multiple variants of the same machine since, at that point, it's not important to "preventively know" what panel we have (eh, it's autodetected...!). This was tested on a MT8195 Cherry Tomato Chromebook (panel-edp on aux-bus) P.S.: For your own testing commodity, here's a reference devicetree: &edp_tx { status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&edptx_pins_default>; ports { #address-cells = <1>; #size-cells = <0>; port@0 { reg = <0>; edp_in: endpoint { remote-endpoint = <&dp_intf0_out>; }; }; port@1 { reg = <1>; edp_out: endpoint { data-lanes = <0 1 2 3>; remote-endpoint = <&panel_in>; }; }; }; aux-bus { panel: panel { compatible = "edp-panel"; power-supply = <&pp3300_disp_x>; backlight = <&backlight_lcd0>; port { panel_in: endpoint { remote-endpoint = <&edp_out>; }; }; }; }; }; AngeloGioacchino Del Regno (9): drm/mediatek: dp: Cache EDID for eDP panel drm/mediatek: dp: Move AUX and panel poweron/off sequence to function drm/mediatek: dp: Always return connected status for eDP in .detect() drm/mediatek: dp: Always set cable_plugged_in at resume for eDP panel drm/mediatek: dp: Change logging to dev for mtk_dp_aux_transfer() drm/mediatek: dp: Enable event interrupt only when bridge attached drm/mediatek: dp: Use devm variant of drm_bridge_add() drm/mediatek: dp: Move AUX_P0 setting to mtk_dp_initialize_aux_settings() drm/mediatek: dp: Add support for embedded DisplayPort aux-bus drivers/gpu/drm/mediatek/mtk_dp.c | 186 +++++++++++++++++++----------- 1 file changed, 116 insertions(+), 70 deletions(-) Tested-by: Chen-Yu Tsai