| Message ID | 20230714013756.1546769-1-sre@kernel.org (mailing list archive) |
|---|---|
| Headers | show |
| Series | Sitronix ST7789V improvements | expand |
Hi Sebastian, + Thomas sre@kernel.org wrote on Fri, 14 Jul 2023 03:37:37 +0200: > Hi, > > This adds panel support for Inanbo T28CP45TN89, which I found inside of a > handheld thermal camera. The panel is based on the st7789v controller. All > information is based on reverse engineering. I also appended the series > from Miquel Raynal adding EDT ET028013DMA panel support, so that I could > easily test it with my SPI_NO_RX setup. They are slightly different due > to rebasing. Thanks a lot! I'll continue following the series and provide my help when required. Cheers, Miquèl > > Changes since PATCHv2: > * https://lore.kernel.org/all/20230422205012.2464933-1-sre@kernel.org/ > * https://lore.kernel.org/all/20230616163255.2804163-1-miquel.raynal@bootlin.com/ > * Add Rob Herring's R-b for the DT binding > * Make panel info "static const" > * Add Michael Riesch's R-b to all my patches > * Rebase to 6.5-rc1 > * Append Miquel's series > > Changes since PATCHv1: > * https://lore.kernel.org/all/20230317232355.1554980-1-sre@kernel.org/ > * Apply DT binding changes requested by Krzysztof Kozlowski and his Ack > * I changed the driver patches to avoid code duplication and splitted > the code a bit more > > Greetings, > > -- Sebastian > > Miquel Raynal (6): > dt-bindings: display: st7789v: Add the edt,et028013dma panel > compatible > dt-bindings: display: st7789v: bound the number of Rx data lines > drm/panel: sitronix-st7789v: Use 9 bits per spi word by default > drm/panel: sitronix-st7789v: Clarify a definition > drm/panel: sitronix-st7789v: Add EDT ET028013DMA panel support > drm/panel: sitronix-st7789v: Check display ID > > Sebastian Reichel (13): > dt-bindings: vendor-prefixes: add Inanbo > dt-bindings: display: st7789v: add Inanbo T28CP45TN89 > drm/panel: sitronix-st7789v: add SPI ID table > drm/panel: sitronix-st7789v: remove unused constants > drm/panel: sitronix-st7789v: make reset GPIO optional > drm/panel: sitronix-st7789v: simplify st7789v_spi_write > drm/panel: sitronix-st7789v: improve error handling > drm/panel: sitronix-st7789v: avoid hardcoding mode info > drm/panel: sitronix-st7789v: avoid hardcoding panel size > drm/panel: sitronix-st7789v: add media bus format > drm/panel: sitronix-st7789v: avoid hardcoding invert mode > drm/panel: sitronix-st7789v: avoid hardcoding polarity info > drm/panel: sitronix-st7789v: add Inanbo T28CP45TN89 support > > .../display/panel/sitronix,st7789v.yaml | 10 +- > .../devicetree/bindings/vendor-prefixes.yaml | 2 + > .../gpu/drm/panel/panel-sitronix-st7789v.c | 262 +++++++++++++++--- > 3 files changed, 237 insertions(+), 37 deletions(-) >
Hi, Each patch in the series has at least one Reviewed-by tag and the DT binding changes have an Acked-by from at least one of the DT binding maintainers. It has been pending on the mailing list for two weeks now, so can it be applied? P.S.: Looks like I missed Neil in the original recipients list. Sorry about that. If you are not subscribed to dri-devel and need the full thread it's available here: https://lore.kernel.org/all/20230714013756.1546769-1-sre@kernel.org/ Greetings, -- Sebastian
Hi Sebastian, On 01/08/2023 00:03, Sebastian Reichel wrote: > Hi, > > Each patch in the series has at least one Reviewed-by tag and the DT > binding changes have an Acked-by from at least one of the DT binding > maintainers. It has been pending on the mailing list for two weeks > now, so can it be applied? > > P.S.: Looks like I missed Neil in the original recipients list. > Sorry about that. If you are not subscribed to dri-devel and need > the full thread it's available here: Indeed I wasn't in CC and missed the thread. > > https://lore.kernel.org/all/20230714013756.1546769-1-sre@kernel.org/ Applying it now, Thanks. Neil > > Greetings, > > -- Sebastian
Hi, On Fri, 14 Jul 2023 03:37:37 +0200, Sebastian Reichel wrote: > This adds panel support for Inanbo T28CP45TN89, which I found inside of a > handheld thermal camera. The panel is based on the st7789v controller. All > information is based on reverse engineering. I also appended the series > from Miquel Raynal adding EDT ET028013DMA panel support, so that I could > easily test it with my SPI_NO_RX setup. They are slightly different due > to rebasing. > > [...] Thanks, Applied to https://anongit.freedesktop.org/git/drm/drm-misc.git (drm-misc-next) [01/19] dt-bindings: vendor-prefixes: add Inanbo https://cgit.freedesktop.org/drm/drm-misc/commit/?id=b93e0e203e27492a2277169e05ac59afb9bf7fcd [02/19] dt-bindings: display: st7789v: add Inanbo T28CP45TN89 https://cgit.freedesktop.org/drm/drm-misc/commit/?id=ff984a81cf601a68ba99a9c3264145f4d931783d [03/19] drm/panel: sitronix-st7789v: add SPI ID table https://cgit.freedesktop.org/drm/drm-misc/commit/?id=11649154ec46f1c7f7c58bac22e2c5927ca6b6a2 [04/19] drm/panel: sitronix-st7789v: remove unused constants https://cgit.freedesktop.org/drm/drm-misc/commit/?id=c2974f43b1237e0c985760156bc3ca4dccbb5243 [05/19] drm/panel: sitronix-st7789v: make reset GPIO optional https://cgit.freedesktop.org/drm/drm-misc/commit/?id=b6b65e45e09a2e940e48722fa0bfdf16e6f4edf8 [06/19] drm/panel: sitronix-st7789v: simplify st7789v_spi_write https://cgit.freedesktop.org/drm/drm-misc/commit/?id=fbad26dcb657830e59ba2ca5eaba6be0019b97f9 [07/19] drm/panel: sitronix-st7789v: improve error handling https://cgit.freedesktop.org/drm/drm-misc/commit/?id=bc2aa99b2306bc9d91586bc9187bfef4e61d3882 [08/19] drm/panel: sitronix-st7789v: avoid hardcoding mode info https://cgit.freedesktop.org/drm/drm-misc/commit/?id=9b4454fa2528c617b5986517c9c73e50e30d237d [09/19] drm/panel: sitronix-st7789v: avoid hardcoding panel size https://cgit.freedesktop.org/drm/drm-misc/commit/?id=4098d1867f27de2443c33e116b064ad3082aecb9 [10/19] drm/panel: sitronix-st7789v: add media bus format https://cgit.freedesktop.org/drm/drm-misc/commit/?id=a4b563b1d19dea9de366f81cae6342d80b663a45 [11/19] drm/panel: sitronix-st7789v: avoid hardcoding invert mode https://cgit.freedesktop.org/drm/drm-misc/commit/?id=7a6288726cf6bc0fa1bca0f24922a06425b84bf1 [12/19] drm/panel: sitronix-st7789v: avoid hardcoding polarity info https://cgit.freedesktop.org/drm/drm-misc/commit/?id=e4572f99f8a7dfd8a081c9135943ab82abe6f692 [13/19] drm/panel: sitronix-st7789v: add Inanbo T28CP45TN89 support https://cgit.freedesktop.org/drm/drm-misc/commit/?id=a411558cc14309073616e72d259083602585b296 [14/19] dt-bindings: display: st7789v: Add the edt,et028013dma panel compatible https://cgit.freedesktop.org/drm/drm-misc/commit/?id=893cfba7c56aa3fed34935b6fbc14a008c3b8172 [15/19] dt-bindings: display: st7789v: bound the number of Rx data lines https://cgit.freedesktop.org/drm/drm-misc/commit/?id=9943981aa3ab7841186827fce2177279c766b6df [16/19] drm/panel: sitronix-st7789v: Use 9 bits per spi word by default https://cgit.freedesktop.org/drm/drm-misc/commit/?id=6b00e72e4bee08048379a6365251b195b8a946d1 [17/19] drm/panel: sitronix-st7789v: Clarify a definition https://cgit.freedesktop.org/drm/drm-misc/commit/?id=a368b40836e7fc4f24dbb0fcfb9dedcde1dcaa38 [18/19] drm/panel: sitronix-st7789v: Add EDT ET028013DMA panel support https://cgit.freedesktop.org/drm/drm-misc/commit/?id=71f739082160b5e4def3a7083dc25583cc195d04 [19/19] drm/panel: sitronix-st7789v: Check display ID https://cgit.freedesktop.org/drm/drm-misc/commit/?id=290cdd7959a734a0ef20ec096af7810177c4b9f8
Hi, This adds panel support for Inanbo T28CP45TN89, which I found inside of a handheld thermal camera. The panel is based on the st7789v controller. All information is based on reverse engineering. I also appended the series from Miquel Raynal adding EDT ET028013DMA panel support, so that I could easily test it with my SPI_NO_RX setup. They are slightly different due to rebasing. Changes since PATCHv2: * https://lore.kernel.org/all/20230422205012.2464933-1-sre@kernel.org/ * https://lore.kernel.org/all/20230616163255.2804163-1-miquel.raynal@bootlin.com/ * Add Rob Herring's R-b for the DT binding * Make panel info "static const" * Add Michael Riesch's R-b to all my patches * Rebase to 6.5-rc1 * Append Miquel's series Changes since PATCHv1: * https://lore.kernel.org/all/20230317232355.1554980-1-sre@kernel.org/ * Apply DT binding changes requested by Krzysztof Kozlowski and his Ack * I changed the driver patches to avoid code duplication and splitted the code a bit more Greetings, -- Sebastian Miquel Raynal (6): dt-bindings: display: st7789v: Add the edt,et028013dma panel compatible dt-bindings: display: st7789v: bound the number of Rx data lines drm/panel: sitronix-st7789v: Use 9 bits per spi word by default drm/panel: sitronix-st7789v: Clarify a definition drm/panel: sitronix-st7789v: Add EDT ET028013DMA panel support drm/panel: sitronix-st7789v: Check display ID Sebastian Reichel (13): dt-bindings: vendor-prefixes: add Inanbo dt-bindings: display: st7789v: add Inanbo T28CP45TN89 drm/panel: sitronix-st7789v: add SPI ID table drm/panel: sitronix-st7789v: remove unused constants drm/panel: sitronix-st7789v: make reset GPIO optional drm/panel: sitronix-st7789v: simplify st7789v_spi_write drm/panel: sitronix-st7789v: improve error handling drm/panel: sitronix-st7789v: avoid hardcoding mode info drm/panel: sitronix-st7789v: avoid hardcoding panel size drm/panel: sitronix-st7789v: add media bus format drm/panel: sitronix-st7789v: avoid hardcoding invert mode drm/panel: sitronix-st7789v: avoid hardcoding polarity info drm/panel: sitronix-st7789v: add Inanbo T28CP45TN89 support .../display/panel/sitronix,st7789v.yaml | 10 +- .../devicetree/bindings/vendor-prefixes.yaml | 2 + .../gpu/drm/panel/panel-sitronix-st7789v.c | 262 +++++++++++++++--- 3 files changed, 237 insertions(+), 37 deletions(-)